1. Įvadas
The ATOMSTACK A24 Ultra is a high-performance laser engraving and cutting machine designed for precision and efficiency. Featuring a powerful 24,000mW diode laser, a built-in enclosure with a camera, and an integrated exhaust system, it is suitable for a wide range of materials and applications. This manual provides essential information for the safe and effective operation and maintenance of your device.
2. Saugos informacija
The ATOMSTACK A24 Ultra is a Class 1 diode laser engraver. Adherence to safety guidelines is paramount to prevent injury and ensure proper operation. This machine incorporates several safety features:
- Apsauginis užraktas: Apsaugo nuo neteisėto naudojimo.
- Position Movement Detection: If the machine tilts by 15-20 degrees, an alarm triggers, and operation halts automatically.
- Ribiniai jungikliai: Four-way X & Y axis limit switches prevent collisions with the machine's edges.
- Dual-Layer Protection: The enclosure is equipped with two interlocks that automatically shut off the laser when the cover is opened, providing continuous double-layer eye protection.
Always wear appropriate laser safety glasses when operating the machine, even with the enclosure closed, as an additional precaution. Ensure proper ventilation to dissipate smoke and fumes.
Figure 2.1: All-around Safety Protection features of the ATOMSTACK A24 Ultra. The machine is designed with multiple layers of safety, including tilt detection, interlocks that stop the laser when the cover is opened, and limit switches to prevent movement beyond the working area.
3. Produkto ypatybės
The ATOMSTACK A24 Ultra offers advanced features for superior engraving and cutting:
- Powerful 24,000mW Diode Laser: Delivers deep cuts and rapid engravings. Capable of cutting through 15mm wood and 10mm black acrylic in a single pass.
- Ultra-Fine Laser Spot: A precise 0.06*0.06mm laser spot focus achieves an accuracy of 0.004 inches, comparable to industrial CNC machines.
- Integrated Enclosure with Camera: The built-in enclosure enhances safety by containing fumes and laser light. The high-resolution camera allows for enhanced visualization and efficient batch processing when connected to PC software.
- Efficient Exhaust System: A high-performance exhaust system with a built-in 7500RPM fan effectively filters and removes smoke and dust, improving efficiency and reducing noise.
- Broad Material Compatibility: Engraves and cuts a wide variety of materials including paper, wood, leather, acrylic, metal, glass, and fabric.
- Tvirta konstrukcija: Crafted from anodized full aluminum alloy with a unibody frame for durability and stability.
Figure 3.1: The powerful 24W diode laser output enables single-pass cutting of thick materials like 15mm basswood and 10mm black acrylic.
Figure 3.2: The A24 Ultra boasts an engraving speed of 600mm/s, significantly increasing productivity for various projects.
Figure 3.3: The integrated 5MP camera facilitates precise positioning and efficient batch engraving, streamlining your workflow.
4. Sąranka
The ATOMSTACK A24 Ultra is designed for straightforward setup. The main frame comes pre-assembled, requiring minimal effort to get started.
- Išpakavimas: Carefully remove all components from the packaging. The package includes the laser engraving machine, the enclosure with camera, and a compatible exhaust pipe.
- Lazerinio modulio įrengimas: Attach the laser module to the crossbar. Ensure it is securely fastened.
- Kabelių jungtys: Connect the necessary power and data cables to the machine.
- Korpuso surinkimas: If not already assembled, follow the instructions in the included Installation Manual (PDF) to set up the B3 enclosure around the machine.
- Išmetimo vamzdžio jungtis: Connect the provided exhaust pipe to the integrated exhaust system on the enclosure to ensure proper smoke and dust filtration during operation.
- Programinės įrangos diegimas: Download and install the ATOMSTACK application on your Windows PC or mobile device (available on App Store and Google Play). The machine is also compatible with engraving software like LaserGRBL and LightBurn.
- Prisijunkite prie įrenginio: Follow the in-app instructions to connect your device to the machine, typically via Wi-Fi. The default password for Wi-Fi connection is usually 12345678.
For detailed visual instructions, refer to the Installation Manual (PDF) provided with your product.
Figure 4.1: The ATOMSTACK A24 Ultra, shown with its enclosure, is designed for easy setup and immediate use.
5. Operacija
Operating the ATOMSTACK A24 Ultra is intuitive, especially with the dedicated mobile application and PC software.
- Maitinimas: Įjunkite įrenginį naudodami pagrindinį maitinimo jungiklį.
- Medžiagos išdėstymas: Place your desired material on the engraving bed.
- Fokuso reguliavimas: Adjust the laser focus using the newly incorporated knob. This typically involves sliding the laser until it touches the focusing block, then tightening the screw and removing the block.
- Programinės įrangos sąsaja: Open the ATOMSTACK app or compatible software (LaserGRBL, LightBurn).
- Image Selection/Creation: Select an image from your gallery, create a new design, or use the built-in camera to scan and extract patterns directly from objects for batch processing.
- Parametrų nustatymai: Adjust engraving parameters such as power, speed, and material type within the software.
- Pradėkite graviravimą / pjovimą: Initiate the process from the software. The machine will begin engraving or cutting your design.
- Stebėjimas: Monitor the process through the enclosure's transparent cover and the software's real-time visualization via the camera.
- Gyvenimo aprašymo funkcija: The machine features a resume function that allows seamless continuation after a power outage, preventing material waste.
Always ensure the enclosure is closed during operation to maintain safety and optimize smoke extraction.
Figure 5.1: The protective cover and efficient exhaust system ensure a safe and clean engraving environment.
Figure 5.2: The A24 Ultra supports multiple software platforms and connectivity options for flexible operation.
6. Priežiūra
Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK A24 Ultra:
- Valymas: Regularly clean the laser lens and the engraving bed to remove dust and debris. Use a soft, lint-free cloth and appropriate cleaning solutions.
- Išmetimo sistema: Periodically check and clean the exhaust fan and pipe to ensure efficient smoke and dust removal.
- Diržo įtempimas: Verify and adjust the belt tension as needed to maintain precise movement and engraving accuracy.
- Tepimas: Apply a small amount of lubricant to the moving parts of the X and Y axes to ensure smooth operation.
- Firmware atnaujinimai: Check the ATOMSTACK official website or app for any available firmware updates to ensure your machine has the latest features and improvements.
7. Problemų sprendimas
If you encounter issues with your ATOMSTACK A24 Ultra, consider the following common troubleshooting steps:
- Mašina neįsijungia: Ensure the power cable is securely connected and the power outlet is functional. Check the emergency stop button to ensure it is not engaged.
- Lazeris neveikia: Verify that the safety interlocks on the enclosure are properly engaged (cover fully closed). Check the laser module connection.
- Engraving Inaccuracy: Check the belt tension and ensure all moving parts are clean and lubricated. Re-adjust the laser focus.
- Programinės įrangos ryšio problemos: Ensure your device is connected to the machine's Wi-Fi network. Restart both the machine and the software/app.
- Per didelis dūmų/garų kiekis: Verify the exhaust pipe is properly connected and unobstructed. Clean the exhaust fan and filter if necessary.
For persistent issues or complex problems, refer to the detailed troubleshooting section in the Instructions for Use (IFU) PDF or contact ATOMSTACK customer support.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | ATSISAKYMAS |
| Modelio numeris | A24 Ultra |
| Lazerio išėjimo galia | 24000 milivatų (24 W) |
| Lazerio taško dydis | 0.06*0.06mm |
| Graviravimo tikslumas | 0.004 colių |
| Graviravimo greitis | Iki 600 mm/s |
| Gaminio matmenys | 23.23 x 23.23 x 14.96 colio |
| Prekės svoris | 30.8 svaro |
| Spalva | Juoda ir raudona |
| Palaikomos medžiagos | Popierius, Mediena, Oda, MDF, Nerūdijantis plienas, Nepermatomas akrilas, Bambukas, Audinys, Tamsus stiklas, Keramika, Nefritas, Marmuras, Skalūnas, Cementas, Plyta, Dengtas metalas, Dažytas metalas |
| Įtraukti komponentai | 1*Laser Engraver, Enclosure with Camera, Exhaust Pipe |
| Saugos klasė | Class 1 Diode Laser |
9. Garantija ir palaikymas
The ATOMSTACK A24 Ultra comes with a 1 metų garantija from the date of purchase. For warranty claims, technical support, or any inquiries, please contact ATOMSTACK customer support through the official channels provided in your product packaging or on the ATOMSTACK Official Store websvetainę.
