1. Įvadas
This manual provides essential instructions for the installation, operation, and maintenance of your Aigo Q1718 Mini-Tower PC Case. Designed for M-ATX and ITX motherboards, this compact case offers a robust housing for your computer components. Please read this manual thoroughly before beginning any installation to ensure proper assembly and functionality.
1 pav.: priekis view of the Aigo Q1718 Mini-Tower PC Case.
2 pav.: Kampinis view of the Aigo Q1718 Mini-Tower PC Case.
2. Sąranka ir komponentų diegimas
Follow these steps to install your computer components into the Aigo Q1718 PC Case. Ensure the case is placed on a stable, flat surface before beginning.
2.1. Bylos atidarymas
Carefully remove the side panel(s) of the case to access the interior. Typically, this involves unscrewing thumbscrews at the rear and sliding the panel backward.
2.2 Pagrindinės plokštės montavimas
The Aigo Q1718 supports M-ATX and ITX motherboards. Install the necessary standoffs onto the motherboard tray according to your motherboard's form factor. Carefully place your motherboard onto the standoffs and secure it with screws.
2.3 Maitinimo šaltinio įrengimas
The case supports ATX power supplies. Install your ATX power supply into its designated bay, usually at the top or bottom rear of the case, and secure it with screws.
2.4 Saugojimo įrenginio įrengimas
The case provides bays for 2 x SSDs and 1 x HDD. Mount your SSDs and HDDs into the appropriate drive bays and secure them. Connect the necessary power and data cables.
2.5 Išplėtimo plokštės diegimas
The case features 4 expansion slots. Install your graphics card (VGA) or other PCIe expansion cards into the motherboard's PCIe slots. Note the maximum VGA length supported is 155 mm.
2.6 CPU aušintuvo montavimas
Install your CPU cooler onto the motherboard. Ensure it fits within the maximum supported CPU cooler height of 270 mm.
2.7 Fan Installation (Optional)
The Aigo Q1718 case does ne include fans. You can install additional cooling fans in the following positions:
- Front: 1 x 120 mm fan
- Side: 1 x 120 mm fan
- Rear: 1 x 80 mm fan
3 pav. Vidus view of the case, left side.
4 pav. Vidus view of the case, right side.
3. Kompiuterio korpuso valdymas
Once all components are installed and cables are connected, you can close the case and power on your system.
3.1 Priekinio skydelio jungtys
The front panel of the Aigo Q1718 provides convenient access to:
- 2 USB 2.0 prievadai: Skirta prijungti periferinius įrenginius, tokius kaip klaviatūros, pelės ar USB atmintinės.
- Audio/Mic Jacks: Skirta ausinėms, garsiakalbiams arba mikrofonams prijungti.
- Maitinimo mygtukas: To turn your computer on or off.
- Reset Button (if present): To restart your computer.
Ensure all front panel cables are correctly connected to your motherboard's headers during installation.
4. Priežiūra
Reguliarus techninis aptarnavimas padeda užtikrinti optimalų kompiuterio komponentų veikimą ir ilgaamžiškumą.
4.1 Valymas
- Išorė: Naudokite minkštą, damp šluoste išoriniams paviršiams valyti. Venkite abrazyvinių valiklių.
- Interjeras: Periodically open the case and use compressed air to remove dust buildup from components and fan mounts. If dust filters are present, clean them regularly.
4.2 Bendroji priežiūra
Avoid placing the case in direct sunlight or near heat sources. Ensure adequate airflow around the case to prevent overheating.
5. Problemų sprendimas
Jei kyla problemų, apsvarstykite šiuos įprastus trikčių šalinimo veiksmus:
- Sistema neįsijungia: Check all power connections, including the power supply to the wall outlet, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
- Components not detected: Ensure all components (motherboard, CPU, RAM, storage, graphics card) are properly seated and their respective power and data cables are securely connected.
- Perkaitimas: Verify that all installed fans are spinning correctly and that there is no excessive dust buildup obstructing airflow. Ensure proper thermal paste application on the CPU cooler.
Sudėtingesniems klausimams spręsti žr. atskirų komponentų vadovus arba kreipkitės profesionalios pagalbos.
6. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Aigo |
| Modelis | Q1718-BK |
| Modelio pavadinimas | Q1718 |
| Atvejo tipas | Mini bokštas |
| Pagrindinės plokštės suderinamumas | M-ATX / ITX |
| Medžiagos tipas | 0.4mm SPCC Steel Alloy |
| Drive Bays | 2 x SSD, 1 x HDD |
| Išplėtimo lizdai | 4 |
| Priekinės įvesties / išvesties prievadai | 2 x USB 2.0, Audio/Mic |
| Supported Fans (Max) | Front: 1 x 120 mm, Side: 1 x 120 mm, Rear: 1 x 80 mm |
| Maksimalus VGA ilgis | 155 mm |
| Maksimalus procesoriaus aušintuvo aukštis | 270 mm |
| Palaikomas maitinimo šaltinis | ATX |
| Gaminio matmenys (I x P x A) | 30.5 x 17 x 35 cm |
| Produkto svoris | 1.76 kilogramo |
| Spalva | Juoda |
| Ypatingos savybės | No fans included |
7. Informacija apie garantiją
The Aigo Q1718 Mini-Tower PC Case comes with a 12 mėnesių gamintojo garantija from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or modifications.
Išsaugokite pirkimo įrodymą, kad galėtumėte kreiptis dėl garantijos.
8. Parama
For technical assistance, warranty claims, or further inquiries regarding your Aigo Q1718 PC Case, please contact Aigo customer support through their official websvetainėje arba mažmenininke, iš kurio įsigijote produktą.
When contacting support, please have your product model (Q1718-BK) and proof of purchase readily available.
