Aigo Q2503 Mini-Tower PC Case User Manual

1. Įvadas

Thank you for choosing the Aigo Q2503 Mini-Tower PC Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new computer chassis. Please read this guide thoroughly before beginning assembly to ensure optimal performance and longevity of your system components.

2. Produktas baigtasview

The Aigo Q2503 is a compact Mini-Tower PC case designed for M-ATX and ITX motherboards. It offers a streamlined design with essential features for building a functional and efficient computer system. Its robust construction provides a secure environment for your components.

2.1 pav.: Priekinė pusė view of the Aigo Q2503 Mini-Tower PC Case, showcasing its compact design and front panel I/O ports.

2.2 pav.: priekis view of the Aigo Q2503 Mini-Tower PC Case, highlighting the vertical ventilation slats and front panel controls.

3. Sąranka ir diegimas

Follow these steps for proper component installation within the Aigo Q2503 case.

3.1 Bylos parengimas

1. Išpakuokite dėklą ir nuimkite visas pakavimo medžiagas.
2. Carefully remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward.

3.1 pav. Vidinis view of the Aigo Q2503 PC Case, showing the motherboard tray and drive mounting points.

3.2 Pagrindinės plokštės montavimas

1. Įdėkite prie pagrindinės plokštės pridedamą įvesties / išvesties skydą į galinę korpuso angą.
2. Align your M-ATX or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Pritvirtinkite pagrindinę plokštę atitinkamais varžtais.

3.3 Pavaros įrengimas

• SSD (1x): Locate the dedicated SSD mounting point (typically on the motherboard tray or behind it). Secure the SSD using screws.
• HDD (1x): Locate the HDD bay. Slide the HDD into the bay and secure it with screws.

3.4 Expansion Card Installation (VGA)

1. Nuimkite reikiamus išplėtimo lizdų dangtelius nuo korpuso galo.
2. Insert your graphics card (VGA) or other expansion cards into the PCIe slots on your motherboard.
3. Secure the expansion cards with screws. Note the maximum VGA length supported is 150 mm.

3.5 CPU aušintuvo montavimas

Install your CPU cooler according to its manufacturer's instructions. Ensure the cooler's height does not exceed the maximum supported height of 250 mm for this case.

3.6 Maitinimo šaltinio įrengimas

The Aigo Q2503 supports ATX power supplies. Mount your ATX power supply in the designated area, typically at the top or bottom rear of the case, and secure it with screws.

3.7 Ventiliatoriaus montavimas

The case supports the following fan configurations (fans are not included):

• Galinis: 1 x 80 mm fan
• Šonas: 1 x 120 mm fan

Install fans in the specified locations to optimize airflow.

3.8 Priekinio skydelio jungtys

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0, Audio/Mic) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4. Kompiuterio korpuso valdymas

Once all components are installed and connected, replace the side panels and secure them. Connect your monitor, keyboard, mouse, and power cable to your system. Press the power button on the front panel to start your computer.

Priekinis skydelis suteikia patogią prieigą prie:

• Maitinimo mygtukas
• Atkūrimo mygtukas
• 2 x USB 2.0 prievadai
• Audio Out (Headphone) Jack
• Mikrofonas lizde

5. Priežiūra

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC components.

5.1 Valymas

• Išorė: Naudokite minkštą, damp šluoste išoriniams paviršiams valyti. Venkite abrazyvinių valiklių.
• Interjeras: Periodically open the case and use compressed air to remove dust buildup from components, fans, and filters. Ensure the system is powered off and unplugged before cleaning the interior.

5.2 Oro srautas

Ensure that the case's ventilation openings are not obstructed to maintain proper airflow and prevent overheating.

6. Problemų sprendimas

Jei kyla problemų dėl kompiuterio surinkimo, atlikite šiuos bendruosius trikčių šalinimo veiksmus:

• Nėra galios: Double-check all power connections, including the power supply to the wall, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
• Perkaitimas: Verify that all case fans and CPU cooler fans are spinning correctly. Ensure proper airflow within the case and that ventilation openings are clear.
• Priekinio skydelio prievadai neveikia: Confirm that the USB and Audio/Mic cables from the front panel are correctly connected to the motherboard headers.
• Komponentų tinkamumo problemos: Ensure that all components, especially the graphics card and CPU cooler, are within the specified maximum dimensions for the case.

7. Specifikacijos

Below are the detailed specifications for the Aigo Q2503 Mini-Tower PC Case:

8. Informacija apie garantiją

The Aigo Q2503 Mini-Tower PC Case comes with a manufacturer's warranty of 12 mėnesių from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.

9. Parama

For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the official Aigo support channels. Refer to the Aigo official websvetainę, kurioje rasite naujausią kontaktinę informaciją ir pagalbos išteklius.

Before contacting support, please have your product model (Q2503-BK) and proof of purchase readily available.