TechniSat DIGICLOCK 3 FM Projection Radio Alarm Clock User Manual

Įvadas

The TechniSat DIGICLOCK 3 is an FM projection radio alarm clock designed to display time clearly on its LED screen and project it onto a wall or ceiling. This manual provides detailed instructions for its setup, operation, and maintenance to ensure optimal performance.

Vaizdas: priekis view of the TechniSat DIGICLOCK 3, showing the digital time display and the time projected from the top.

1. Sąranka

1.1 Maitinimo jungtis

Connect the integrated power adapter to a standard electrical outlet. For backup power during outages, insert optional batteries (not included) into the battery compartment. This ensures time and alarm settings are retained.

1.2 Antenos prijungimas

Extend the integrated FM wire antenna for optimal radio reception. Position the antenna away from other electronic devices to minimize interference.

1.3 Pradinis laiko nustatymas

Upon first power-up or after a complete power loss without battery backup, the time may need to be set manually. Refer to the "Setting Time and Date" section under Operating Instructions for details.

2. Naudojimo instrukcijos

2.1 Valdymas baigtasview

Vaizdas: Viršus view of the alarm clock, highlighting the various control buttons for time, alarm, radio, and projection functions.

The top panel of the DIGICLOCK 3 features several buttons for controlling its functions:

• TIME SET / PRESET: Used to set the time and save/recall radio presets.
• SIGNALAS: Activates/deactivates alarms.
• PROJECTION ON/OFF / 180° FLIP: Controls the projection feature and flips the projected image.
• SNAUTI / MIEGO: Activates snooze during an alarm or sets the sleep timer for radio playback.
• AL VOL+ / AL VOL-: Adjusts alarm volume.
• MIN/TUNE+ / HOUR/TUNE-: Adjusts minutes/hours and tunes radio frequencies.

2.2 Laiko ir datos nustatymas

1. Paspauskite ir palaikykite LAIKO NUSTATYMAS mygtuką. Valandų rodmuo mirksės.
2. Naudokite HOUR/TUNE- ir MIN/TUNE+ mygtukai valandoms reguliuoti.
3. Paspauskite LAIKO NUSTATYMAS again. The minute display will flash.
4. Naudokite HOUR/TUNE- ir MIN/TUNE+ mygtukai minutėms reguliuoti.
5. Paspauskite LAIKO NUSTATYMAS , kad patvirtintumėte ir išeitumėte iš laiko nustatymo režimo.

2.3 Signalizacijos funkcijos

The DIGICLOCK 3 supports two independent alarms (Alarm 1 and Alarm 2).

Signalo nustatymas:

1. Paspauskite ir palaikykite SIGNALAS button. "AL1" or "AL2" will flash.
2. Paspauskite SIGNALAS repeatedly to select Alarm 1 or Alarm 2.
3. Naudokite HOUR/TUNE- ir MIN/TUNE+ norėdami nustatyti norimą žadintuvo laiką.
4. Paspauskite SIGNALAS kad patvirtintumėte laiką.
5. Select the alarm source (FM radio or buzzer) using HOUR/TUNE- ir MIN/TUNE+.
6. Paspauskite SIGNALAS , kad patvirtintumėte ir suaktyvintumėte žadintuvą. Ekrane pasirodys žadintuvo piktograma.

Snaudimo funkcija:

Kai suskamba žadintuvas, paspauskite SNAIGĖ button to temporarily silence it. The alarm will sound again after approximately 9 minutes.

Signalizacijos išjungimas:

Norėdami visiškai sustabdyti žadintuvą, paspauskite SIGNALAS button. The alarm will reset for the next day. To deactivate an alarm, press the SIGNALAS mygtuką, kol žadintuvo piktograma išnyks iš ekrano.

2.4 FM radijo veikimas

Tuning Radio Stations:

Paspauskite RADIJO ĮJUNGTAS/IŠJUNGTAS button to turn on the FM radio. Use the HOUR/TUNE- ir MIN/TUNE+ buttons to manually tune to a desired frequency. Press and hold these buttons for automatic scanning.

Išankstinių nustatymų išsaugojimas ir atkūrimas:

Įrenginys gali išsaugoti iki 10 FM radijo stočių.

1. Nustatykite norimą stotį.
2. Paspauskite ir palaikykite NUSTATYMAS button until a preset number flashes.
3. Naudokite HOUR/TUNE- ir MIN/TUNE+ to select a preset number (P01-P10).
4. Paspauskite NUSTATYMAS dar kartą, kad išsaugotumėte stotį.
5. Norėdami iškviesti išankstinį nustatymą, trumpai paspauskite NUSTATYMAS mygtuką ir tada naudokite HOUR/TUNE- ir MIN/TUNE+ , kad pasirinktumėte norimą išankstinį nustatymą.

Miego laikmatis:

Kol groja radijas, paspauskite MIEGAS button repeatedly to set a sleep timer (e.g., 90, 60, 30, 15 minutes). The radio will automatically turn off after the set time.

2.5 Laiko projekcija

Vaizdas: Šoninė view of the alarm clock, focusing on the projector lens which can be rotated to adjust the projection angle.

The DIGICLOCK 3 features an integrated projector to display the time on a wall or ceiling.

• Activating/Deactivating Projection: paspauskite PROJEKCIJA ĮJUNGTA/IŠJUNGTA mygtuką, kad įjungtumėte arba išjungtumėte projekciją.
• Projekcijos kampo reguliavimas: Rotate the projector lens on top of the unit to adjust the angle of the projected time up to 180 degrees.
• Flipping Projected Image: If the projected time appears upside down, press the 180 ° FLIP button (often combined with PROJECTION ON/OFF) to rotate the image 180 degrees.
• Fokuso reguliavimas: A small ring around the projector lens can be rotated to adjust the focus of the projected image for clarity.

Note: The clarity and visibility of the projected time may vary depending on ambient light conditions and projection distance. Optimal projection distance is typically within 1 to 1.5 meters.

2.6 Ekrano ryškumas

The 1.2-inch LED display offers two brightness levels. Briefly press the SNAIGĖ button (when no alarm is active) to cycle between the brighter and dimmer display settings.

3. Priežiūra

3.1 Valymas

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface. Ensure no liquids enter the device.

3.2 Akumuliatoriaus keitimas

If using optional backup batteries, replace them periodically (e.g., annually) or when the display shows signs of power loss during an outage. Use the specified battery type and dispose of old batteries responsibly.

4. Problemų sprendimas

5. Specifikacijos

6. Garantija ir palaikymas

Spare parts availability for this product is indicated for 1 year from the date of purchase. For further support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official TechniSat websvetainę.