1. Įvadas
The ROBERTS 9" PrecisionCuts Pro Multi-Floor Cutter is a specialized tool designed for efficient and precise cutting of various flooring and siding materials. This manual provides essential information for the safe and effective operation, setup, and maintenance of your cutter.
This tool is capable of cutting the following materials:
- Suprojektuotos medinės grindys
- Laminuotos grindys
- Parketas
- Vinilinės grindys
- VCT plytelės
- Vinilo dailylentės
- Cemento dailylentės
- Guma
- Putos
- PVC
Image 1.1: The ROBERTS 9" PrecisionCuts Pro Multi-Floor Cutter. This image displays the complete cutter assembly, featuring the long handle, cutting mechanism, and base with a ruler.
2. Saugos instrukcijos
Always prioritize safety when operating any cutting tool. Failure to follow these instructions may result in injury or damage to the tool.
- Perskaitykite vadovą: Prieš pradėdami eksploatuoti, atidžiai perskaitykite ir supraskite visas šiame vadove pateiktas instrukcijas.
- Dėvėkite saugos priemones: Visada dėvėkite tinkamas asmenines apsaugos priemones, įskaitant apsauginius akinius, pirštines ir tvirtą avalynę.
- Stabilus darbinis paviršius: Ensure the cutter is placed on a stable, level, and non-slip surface before use.
- Darbo vietą laikykite švarią: Darbo vieta turi būti švari ir gerai apšviesta. Netvarkingos vietos skatina nelaimingus atsitikimus.
- Laikykite rankas švarias: Never place hands or fingers near the blade during operation or when adjusting materials.
- Saugi medžiaga: Ensure the material to be cut is properly positioned and stable on the cutter's base.
- Ašmenų ryškumas: A dull blade can be more dangerous than a sharp one as it requires more force, increasing the risk of slippage. Keep the blade sharp and replace it when necessary.
- Vaikai ir pašaliniai asmenys: Saugokite vaikus ir pašalinius asmenis nuo darbo zonos.
- Tinkamas saugojimas: Store the cutter in a dry, secure location out of reach of children when not in use.
3. Gaminio komponentai
Familiarize yourself with the key parts of your ROBERTS PrecisionCuts Pro Multi-Floor Cutter:
- Prailginta rankena: Provides leverage for smooth and powerful cutting action.
- Steel-Encased Cams with Ball Bearings: Ensures smooth and efficient operation of the cutting mechanism.
- 4 mm Thick Tungsten Blade: Durable, resharpenable, and replaceable for long-lasting performance.
- Repositionable Guide Bar with Locking Screw: Allows for precise 90-degree straight cuts.
- Built-in Ruler: Features both inches and millimeters for accurate measurements.
- Integruota šviesa: Illuminates the cutting line for enhanced precision (requires 9-volt battery, sold separately).
- Larger Opening: Integrated hand grip in the table for easier portability.
Image 3.1: Key components of the cutter. This diagram highlights the extended handle, steel-encased cams with ball bearings, 4mm thick tungsten blade, repositionable guide bar with locking screw, and the larger opening for carrying.
4. Sąranka
Before beginning any cutting tasks, ensure your cutter is properly set up.
- Išpakavimas: Carefully remove the cutter from its packaging. Inspect for any shipping damage.
- Vieta: Place the cutter on a sturdy, level, and clean work surface. Ensure the surface can support the weight of the cutter and the material being cut.
- Guide Bar Adjustment: The guide bar can be moved to accommodate different material widths and ensure straight 90-degree cuts. Loosen the locking screw, slide the guide bar to the desired position, and securely tighten the locking screw. The built-in ruler aids in precise positioning.
Image 4.1: Guide bar and built-in ruler. This close-up shows the guide bar locked in place for perfect cuts and the integrated ruler with both inches and millimeters for accurate measurements.
- Install 9-Volt Battery (for Built-in Light): If you intend to use the built-in light for precise cutting, insert a 9-volt battery (sold separately) into the designated compartment. Refer to the battery compartment cover for correct polarity.
5. Naudojimo instrukcijos
Follow these steps for safe and effective operation of your multi-floor cutter.
- Paruoškite medžiagą: Measure and mark your cutting line on the material. Ensure the material is clean and free of debris.
- Padėties medžiaga: Place the material firmly against the guide bar and align your marked cutting line with the cutter's blade. Ensure the material is flat on the cutting surface.
- Activate Built-in Light (Optional): If using, turn on the built-in light to illuminate the cutting line for enhanced visibility and precision.
Image 5.1: Built-in light for precise cutting. This image shows a hand pressing the red button to activate the light, which illuminates the cutting area for improved accuracy.
- Vykdyti pjovimą: With a firm grip on the extended handle, apply steady, downward pressure. Pull the handle down smoothly and consistently through the material. Avoid jerky movements.
- Clear Cut Material: Once the cut is complete, carefully remove the cut pieces from the work area.
- Pakartokite: Reposition the guide bar and material as needed for subsequent cuts.
Image 5.2: User operating the cutter. This image shows a person kneeling and using the extended handle to cut a piece of flooring material, demonstrating proper technique.
6. Priežiūra
Regular maintenance ensures the longevity and optimal performance of your cutter.
- Ašmenų priežiūra: The 4 mm thick tungsten blade is resharpenable. If cuts become difficult or ragged, the blade may need sharpening or replacement. Consult a professional for blade sharpening or purchase a genuine ROBERTS replacement blade.
- Valymas: After each use, clean the cutter to remove dust, debris, and material residue. Use a dry cloth or brush. Avoid using harsh chemicals that could damage the tool's finish or components.
- Tepimas: Periodically apply a light machine oil to the moving parts, such as the cam mechanism and guide bar slides, to ensure smooth operation.
- Saugykla: Store the cutter in a dry, protected environment to prevent rust and damage.
7. Problemų sprendimas
If you encounter issues with your cutter, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Cuts are not clean or straight. | Dull blade, improper material positioning, loose guide bar. | Sharpen or replace blade. Ensure material is firmly against guide bar. Tighten guide bar locking screw. |
| Difficulty in cutting material. | Dull blade, material too thick, insufficient downward pressure. | Sharpen or replace blade. Verify material thickness is within specifications (max 5/8" or 16mm). Apply firm, steady pressure. |
| Built-in light not working. | Dead or missing 9-volt battery. | Replace the 9-volt battery. Check battery polarity. |
| Cutter mechanism feels stiff. | Lack of lubrication, accumulated debris. | Clean moving parts and apply light machine oil. |
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | 10-911 |
| Prekės ženklas | ROBERTS |
| Medžiaga | Metal, Tungsten (Blade) |
| Maksimalus pjovimo plotis | 9 colio (229 mm) |
| Maksimalus pjovimo storis | 5/8 colio (16 mm) |
| Diagonal Cut Capacity | 5.5 colių |
| Ašmenų storis | 4 mm |
| Prekės svoris | 26 svaro |
| Power Source for Light | 9-volt battery (sold separately) |
| UPC | 075378100911 |
Image 8.1: Cutter dimensions. This image illustrates the approximate height (36.5" / 92.7 cm), width (9.25" / 23.5 cm), and length (25.5" / 64.7 cm) of the ROBERTS PrecisionCuts Pro Multi-Floor Cutter, along with its cutting capacities of up to 9" wide and 5/8" thick.
9. Pagalba klientams
For further assistance, technical support, or to inquire about replacement parts, please contact ROBERTS customer service. Refer to the product packaging or the official ROBERTS websvetainę, kurioje rasite naujausią kontaktinę informaciją.
