Vixic D1600 Bluetooth Label Maker Instruction Manual

1. Įvadas

This manual provides detailed instructions for the Vixic D1600 Bluetooth Label Maker. Please read this manual thoroughly before using the device to ensure proper operation and to maximize its lifespan. The Vixic D1600 is a portable, inkless thermal label printer designed for various organizational tasks in homes, offices, and schools.

2. Kas yra dėžutėje

Upon unpacking your Vixic D1600 Label Maker, please verify that all the following components are included:

• 1 x Vixic D1600 White-Green Label Maker
• 1 x Vixic D1600 Label Tape (Black on White, 1/2 inch x 13 feet)
• 1 x tipo C laidas
• 1 x Vartotojo vadovas
• 1 x Greitos pradžios vadovas
• 1 x pakavimo dėžutė

Image: The Vixic D1600 Label Maker, a roll of label tape, a USB-C charging cable, and the instruction manual are displayed, indicating the contents of the product package.

3. Sąranka

3.1. Įrenginio įkrovimas

Before initial use, fully charge the Vixic D1600 Label Maker. Connect the provided Type-C cable to the charging port on the device and to a compatible USB power adapter. The built-in 1200mAh lithium battery provides extended use on a single charge. A full charge typically takes approximately 2 hours and allows for continuous printing of up to 80 meters of tape.

Image: The Vixic D1600 Label Maker is shown connected to a wall charger via a USB-C cable, illustrating the charging process. Text indicates a 2-hour charging time for 88 meters of continuous printing.

3.2. Installing the Label Tape

1. Gently press the button on the side of the label maker to open the lid.
2. Insert the label tape cartridge into the designated slot, ensuring it clicks into place. The tape should feed out slightly from the printer's exit slot.
3. Saugiai uždarykite dangtį.

Image: A visual guide showing four steps: 1. Pressing to open the lid, 2. Inserting the DZ label tape, 3. Powering on the device, and 4. Connecting via Bluetooth to print.

3.3. Programėlės diegimas ir „Bluetooth“ ryšys

1. Atsisiųskite programą: Ieškokite the "Print Master" app on your smartphone's app store (available for iOS and Android).
2. Maitinimas: Press and hold the power button on the Vixic D1600 Label Maker until the indicator light turns on.
3. Prisijunkite per Bluetooth: Open the "Print Master" app on your smartphone. Follow the in-app instructions to connect to your D1600 device via Bluetooth. Ensure Bluetooth is enabled on your phone.

Image: A smartphone screen displays the "Print Master" app, showcasing various label templates, fonts, and icons available for customization, with the Vixic D1600 Label Maker in the background.

Image: A sequence of four smartphone screens illustrating the process: 1. Downloading the "Print Master" app, 2. Connecting to the D1600 Label Maker, 3. Editing a label, and 4. Initiating the printing process.

4. Naudojimo instrukcijos

4.1. Etikečių kūrimas

The "Print Master" app offers extensive customization options for your labels:

• Tekstas: Enter your desired text.
• Šriftai: Choose from over 110 fonts.
• Simboliai ir piktogramos: Access over 1600 symbols and icons.
• Rėmeliai: Select from 287 frames to enhance your label design.
• Šablonai: Utilize 26 pre-designed templates for quick label creation.
• Brūkšniniai ir QR kodai: Generate various types of barcodes and QR codes.

The app allows for easy editing, resizing, and positioning of elements on your label.

4.2. Etikečių spausdinimas

Kai programėlėje bus sukurtas etiketės dizainas:

1. Review išankstinisview of your label to ensure accuracy.
2. Adjust the quantity if you need multiple copies of the same label (up to 999+ copies).
3. Tap the "Print now" button in the app. The label maker will print your labels quickly.
4. Carefully tear off the printed label from the device's output slot.

Image: The Vixic D1600 Label Maker is shown printing a continuous strip of labels with different designs, demonstrating its ability to print any length and multiple copies.

5. Priežiūra

5.1. Prietaiso valymas

Norint išlaikyti optimalią spausdinimo kokybę ir įrenginio ilgaamžiškumą:

• Prieš valydami įsitikinkite, kad prietaisas yra išjungtas.
• Use a soft, dry, lint-free cloth to wipe the exterior of the label maker.
• Jei spausdinimo kokybė pablogėja, švelniai nuvalykite terminio spausdinimo galvutę vatos tamponu, lengvai suvilgytu.ampsuvilgytas izopropilo alkoholiu. Prieš naudojimą leiskite jam visiškai išdžiūti.
• Nenaudokite abrazyvinių valiklių ar tirpiklių.

5.2. Akumuliatoriaus priežiūra

• Charge the battery fully before its first use to extend its lifespan.
• Venkite dažnai visiškai iškrauti akumuliatorių.
• If storing the device for an extended period, charge it to approximately 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.

6. Problemų sprendimas

7. Specifikacijos

• Modelių serija: D1600
• Spausdinimo technologija: Šiluminis
• Ryšio technologija: Bluetooth
• Didžiausia spausdinimo raiška: 203 dpi (Black and White, Color)
• Maksimalus laikmenos dydis: 1/2 colio (12 mm)
• Suderinama kasetė: DZ Label Tape
• Rašalo spalva: Black (on label tape)
• Baterija: 1200 mAh ličio jonų akumuliatorius (pridedamas)
• Įkrovimo prievadas: C tipo USB
• Gaminio matmenys: 2 "D x 5" P x 5" A
• Prekės svoris: 14.6 uncijos (0.91 svaro)
• Ypatinga funkcija: App "Print Master" provides 1600+ symbols, 287 frames, 110+ fonts, 11 languages.

8. Garantija ir palaikymas

8.1. Informacija apie garantiją

The Vixic D1600 Label Maker comes with a limited warranty. Please refer to the warranty card included in your packaging or contact Vixic customer support for specific terms and conditions.

8.2. Pagalba klientams

For any questions, technical assistance, or warranty claims, please contact Vixic customer support. You can typically find contact information on the official Vixic websvetainėje arba per pardavėją, iš kurio įsigijote produktą.

Image: A visual guide demonstrating how to contact the seller (Vixic) on Amazon for support, by navigating to the product page and using the 'Ask a question' feature.