1. Įvadas
This manual provides detailed instructions for the operation and maintenance of your FOXWELL NT630 Pro ABS SRS OBD2 Scanner with 12V Battery Tester and the FOXWELL NT301 OBD2 Scanner. These tools are designed to assist in diagnosing vehicle issues, performing battery tests, and clearing diagnostic trouble codes (DTCs).
2. Sąranka
2.1 Pradinis prisijungimas
To begin, ensure your vehicle's ignition is in the OFF position. Locate the vehicle's 16-pin Data Link Connector (DLC), typically found under the dashboard on the driver's side. Connect the diagnostic tool's OBDII cable to the vehicle's DLC. Once connected, turn the vehicle's ignition to the ON position (engine off).
2.2 Įjungimas
The diagnostic tool will power on automatically once connected to the vehicle's DLC. Follow the on-screen prompts to select your desired function.
2.3 Programinės įrangos naujiniai
It is recommended to regularly update the software for both the NT630 Pro and NT301 to ensure access to the latest vehicle coverage and features, such as the Battery Registration (BRT) reset function for the NT630 Pro. Refer to the FOXWELL official website for update instructions and software downloads.
3. Naudojimo instrukcijos
3.1 FOXWELL NT630 Pro
The NT630 Pro is an advanced diagnostic tool offering comprehensive ABS and SRS system diagnostics, along with a 12V battery testing function.
3.1.1 ABS/SRS diagnostika
This function allows you to read ECU information, diagnose trouble codes, and view live data related to the Anti-lock Braking System (ABS) and Supplemental Restraint System (SRS). Live data includes wheel speed sensors, brake switch and pedal signals, hydraulic unit status, and airbag system insights. After necessary repairs, the tool can clear ABS error codes and turn off the ABS warning light. Note: Airbag codes may not be cleared by this tool.
Image: NT630 Pro displaying options for ABS & SRS Diagnostics, including Read Code, Clear Code, Live Data, ECU Information, and Active Test.
Image: A visual representation of in-depth ABS system diagnosis, highlighting data points like FR/FL Wheel Speed, ABS Static Test, ABS System Calibration, and Motor Power Supply Voltage.
3.1.2 12V Battery Test
The NT630 Pro supports testing 100–1100 CCA batteries, including Regular, EFB, AGM (spiral/flat plate), and GEL types. It provides critical battery health information such as voltage, internal resistance, State of Charge (SOC), State of Health (SOH), starting voltage, cranking time, alternator load, and no-load voltage. This helps determine if a battery requires replacement. Ensure the tool is updated to access the Battery Registration (BRT) reset function.
Image: A visual comparison showing the NT630 Plus and the upgraded NT630 Pro, emphasizing the addition of 12V Battery Test, Cranking Test, and Charging Test features.
3.1.3 Service Resets (ABS Bleeding)
The NT630 Pro includes specific service functions such as ABS Bleeding, which is crucial for maintaining brake system integrity after certain repairs.
Image: The NT630 Pro screen showing 'Hot Service Reset' options, with icons for ABS Bleeding, SRS, Oil Reset, and EPB (Electronic Parking Brake).
3.2 FOXWELL NT301
The NT301 is a professional OBDII diagnostic code reader designed for quick and accurate diagnosis of Check Engine Light issues.
3.2.1 Check Engine Light (CEL) Diagnosis
The NT301 allows you to read Diagnostic Trouble Codes (DTCs), access I/M readiness status, and identify the root cause of an illuminated Check Engine Light (MIL). It can monitor sensor tests, read live data, and retrieve the Vehicle Identification Number (VIN). Fault codes can be cleared with the NT301 only after the underlying repair has been completed.
Image: A visual guide demonstrating how the NT301 helps diagnose and clear a Check Engine Light, showing steps like reading and erasing codes to figure out the root cause.
3.2.2 Live Data and Emissions
The NT301 can view freeze frame data, monitor various sensor tests, and perform EVAP system tests. It provides a precise live data display, showing parameters in both text and graph formats, which helps in identifying suspicious or symptom-specific data. The one-click I/M Readiness Test is suitable for emission checks during annual inspections and roadside spot tests.
Paveikslėlis: infografikos demonstracijaasing the functions of the NT301 scanner, including Read DTCs, Erase DTCs, Emissions Check, View Freeze Frame, Monitor Sensors Test, Retrieve VIN, EVAP Test, and Live Data.
Image: The NT301 screen showing a precise live data display with engine RPM represented graphically, aiding in the analysis of symptom-specific data parameters.
Image: The NT301 performing a one-click I/M Readiness Test, indicating the status of various emission monitors (MIL, DTC, MIS, FUE, CCM, O2S, CAT, HRT, EGR, EVAP, AIR) and providing a summary of engine status.
4. Priežiūra
4.1 Valymas
Clean the diagnostic tools with a soft, damp cloth. Do not use abrasive cleaners or solvents. Keep the screen free from dust and debris.
4.2 Saugykla
Store the tools in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep the cables neatly coiled to prevent damage.
4.3 Programinės įrangos naujiniai
Regularly check the FOXWELL official website for software updates. Keeping your tools updated ensures optimal performance, expanded vehicle coverage, and access to new features.
5. Problemų sprendimas
5.1 Įrenginys neįsijungia
Ensure the OBDII cable is securely connected to both the diagnostic tool and the vehicle's DLC. Verify the vehicle's ignition is in the ON position. Check the vehicle's fuse for the OBDII port if the issue persists.
5.2 Ryšio klaidos
If the tool fails to communicate with the vehicle, ensure the ignition is ON and the connection is secure. Try the tool on a different compatible vehicle to rule out a vehicle-specific issue. Consult your vehicle's service manual for DLC location and functionality.
5.3 Codes Not Clearing
Diagnostic Trouble Codes (DTCs) can only be cleared after the underlying fault has been repaired. If the fault persists, the code will reappear. Ensure all necessary repairs are completed before attempting to clear codes.
6. Specifikacijos
- Prekinis ženklas: FOXWELL
- Modeliai: NT630 Pro, NT301
- ASIN: B0DGLHJ2R
- NT630 Pro Functions: ABS/SRS Diagnostics, 12V Battery Test (Health, Cranking, Charging), ABS Bleeding, BRT Reset (requires update)
- NT301 Functions: Read/Clear DTCs, I/M Readiness, Live Data, Freeze Frame, EVAP Test, O2 Sensor Test, VIN Retrieval
- NT630 Pro Battery Support: 100–1100 CCA (Regular, EFB, AGM, GEL)
- Pirmą kartą pasiekiama data: 17 m. balandžio 2025 d
7. Garantija ir palaikymas
FOXWELL products typically come with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your product or visit the official FOXWELL website. For technical support, software updates, or service inquiries, please contact FOXWELL customer service through their official channels.