„BETAFPV Air 5IN1“ bešepetėlinio skrydžio valdiklio 1S AIO FC naudojimo instrukcija

1. Įvadas

The BETAFPV Air 5IN1 Brushless Flight Controller is a lightweight, high-performance 1S All-In-One (AIO) flight controller designed for FPV Whoop Quadcopters. It integrates a G473 CPU, 16MB BlackBox, BB51 Bluejay 96K ESC, OSD Chip, and a built-in Serial ELRS 2.4G receiver. This manual provides essential information for the proper setup, operation, and maintenance of your flight controller.

2. Pakuotės turinys

Please verify all items are present upon unboxing. The package includes:

1 * Air Brushless Flight Controller
1 * 2.4g Antenna (Only 5IN1 Version)
1 * Type-C to SH1.0 Adapter
1 * SH1.0 4Pin Adapter Cable
1 * 5.8g VTX Antenna
1 * BT2.0 U Whoop Cable Pigtail | 40mm
4 * M1.4*4 Self-tapping Screws
4 * Shock Absorbing Ball

BETAFPV Air 5IN1 Flight Controller package contents

Image: Contents of the BETAFPV Air 5IN1 Brushless Flight Controller package.

3. Specifikacijos

Flight Controller (FC) Specifications:

Svoris: 3.6g (5IN1 Version)
Montavimo angos dydis: 26 mm x 26 mm
CPU: STM32G473CEU6 (168MHz)
Šešių ašių: ICM42688P (SPI connection)
Blackbox Memory: 16 MB
5 V BEC: 5V 3A
USB prievadas: SH1.0 4-Pin
RX: Serial ELRS 2.4G (V3.4.3) (Only 5IN1 Version)
5IN1 Version: FC+ESC+OSD+VTX+RX

Video Transmitter (VTX) Specifications:

Išėjimo galia: 25/100/200/400/PIT
Dažnis: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Dažnio valdymas: PLL
All Harmonic: Maksimalus -50 dBm
Dažnio stabilumas: ±100KHz (Typ.)
Frequency Precision: ±200KHz (Typ.)
Channel Carrier Error: ±1.5dB
Antenos prievadas: 50 Ω
Darbinė temperatūra: -10°C~+80°C

BETAFPV Air 5IN1 Flight Controller on a scale showing 3.59g

Image: The BETAFPV Air 5IN1 Flight Controller on a digital scale, displaying its lightweight design at 3.59 grams.

4. Sąranka ir diegimas

The Air 5IN1 FC is designed for advanced pilots due to its compact and integrated nature. Careful handling and precise connections are crucial.

4.1 Komponentas baigtasview

Į viršų view of BETAFPV Air 5IN1 Flight Controller

Vaizdas: Viršus view of the BETAFPV Air 5IN1 Flight Controller, showing the main components and layout.

Apačia view of BETAFPV Air 5IN1 Flight Controller

Vaizdas: Apačia view of the BETAFPV Air 5IN1 Flight Controller, highlighting solder pads and connectors.

4.2 Prievado konfigūracija

The UART2 port is connected with the VTX by default. This flight controller also provides 3 complete full-featured serial ports for external CRSF/SBUS receivers, GPS, HD VTX, or other serial devices. Refer to the diagram below for port details.

Diagram showing UART port configuration for BETAFPV Air 5IN1 Flight Controller

Image: Diagram illustrating the UART port connections and configuration options for the flight controller.

4.3 Detailed Component Labels

Labeled top view of BETAFPV Air 5IN1 Flight Controller

Image: Detailed labeled top view of the BETAFPV Air 5IN1 Flight Controller, identifying key chips and connection points.

Labeled bottom view of BETAFPV Air 5IN1 Flight Controller

Image: Detailed labeled bottom view of the BETAFPV Air 5IN1 Flight Controller, showing ESCs, OSD, and USB connections.

4.4 Įrengimo vaizdo vadovas

For a visual guide on installing a flight controller into a drone, please refer to the following official BETAFPV video. While this video demonstrates installation for a Meteor series drone, the general principles for connecting the flight controller and VTX module are applicable.

Video: Official BETAFPV installation guide for Meteor65 Pro/Meteor75 Pro Brushless Drones. This video demonstrates the physical assembly process, including connecting components like the flight controller and VTX, which can be helpful for understanding the installation of the Air 5IN1 FC.

5. Eksploatacijos gairės

5.1 VTX Power Settings

The integrated onboard VTX allows power adjustment from 25mW to 400mW. Higher VTX power consumes more energy and generates more heat, which can reduce flight time. For optimal flight time in indoor environments, it is recommended to use 25mW to 100mW power settings.

5.2 Imtuvo susiejimas

The Air 5IN1 Brushless Flight Controller integrates a Serial ELRS 2.4G RX with default protocol ELRS and firmware version V3.4.3. Ensure that your binding device (e.g., radio transmitter) uses the same protocol and firmware version for successful binding.

6. Priežiūra

Regular maintenance ensures the longevity and performance of your flight controller.

Fizinė apžiūra: Periodically check all solder joints and connections for any signs of damage or loose contacts.
Kabelių valdymas: Ensure all cables, especially coaxial cables and antenna wires, are properly secured and not under tension to prevent damage.
Švara: Keep the flight controller free from dust, dirt, and moisture. Use a soft brush or compressed air for cleaning.

7. Problemų sprendimas

Jei kyla problemų, apsvarstykite šiuos įprastus trikčių šalinimo veiksmus:

Nėra galios: Check battery connection and ensure the correct polarity. Verify the flight controller receives power.
Įrišimo problemos: Confirm that your transmitter and the FC's ELRS receiver are on the same protocol and firmware version. Re-attempt the binding process as per ELRS documentation.
VTX Signal Problems: Ensure the VTX antenna is securely connected. Check VTX power settings and frequency for interference.
Skrydžio nestabilumas: Verify all motors are spinning in the correct direction and propellers are installed correctly. Check for any loose components or damaged wires.

For more complex issues, please refer to the official BETAFPV support resources.

8. Garantija ir palaikymas

It is recommended to check the package contents immediately upon arrival to ensure everything is in order. For product support, technical assistance, or warranty inquiries, please visit the official BETAFPV store or contact their customer service.

Visit the BETAFPV Store for Support

	„Beta85X“ drono naudojimo instrukcija Išsami „BETAFPV“ „Beta85X Whoop“ kvadrokopterio naudojimo instrukcija, kurioje aprašomos specifikacijos, komponentai, charakteristikos, skrydžio vadovas ir atitiktis FCC reikalavimams.
	BETAFPV Cetus X Brushless Quadcopter vartotojo vadovas Šiame dokumente pateikiamas išsamus „BETAFPV Cetus X Brushless“ kvadrokopterio vadovas, apimantis gaminio turinį, patikrinimus prieš skrydį, susiejimo procedūras, VTX dažnio ir maitinimo perjungimą bei „Betaflight“ konfigūraciją.
	BETAFPV Cetus Lite FPV rinkinio vartotojo vadovas Išsamus „BETAFPV Cetus Lite FPV“ rinkinio naudotojo vadovas, kuriame aprašomas sąranka, skrydžio valdymas, FPV akiniai, nuotolinio valdymo siųstuvas, išplėstiniai nustatymai ir trikčių šalinimas.
	„BETAFPV LiteRadio 4 SE“ radijo siųstuvo naudotojo vadovas \| FPV valdymas Išsamus „BETAFPV LiteRadio 4 SE“ radijo siųstuvo naudotojo vadovas. Sužinokite apie FPV dronų ir simuliatorių funkcijas, specifikacijas, sąranką, susiejimą, simuliatoriaus prijungimą ir atitiktį reikalavimams.
	„BETAFPV Aquila20“ FPV rinkinio naudotojo vadovas „BETAFPV Aquila20 FPV“ rinkinio naudotojo vadovas, kuriame aprašomas analoginio VTX kvadrokopterio valdymas, „LiteRadio 4 SE“ siųstuvas, VR04 akiniai, saugumas ir išplėstinės funkcijos.
	„Cetus FPV“ drono greito paleidimo vadovas Išsamus greito paleidimo vadovas, skirtas „Betafpv Cetus FPV“ dronui. Sužinokite apie skirtingus skrydžio režimus, įskaitant įprastą, sportinį ir rankinį, greičio nustatymus ir optinio srauto padėtį. Svarbi informacija pradedantiesiems pilotams.

BETAFPV Air 5IN1 Brushless Flight Controller