KKnoon 8-Channel 18650 Battery Tester User Manual

1. Įvadas

This manual provides detailed instructions for the safe and efficient operation of the KKnoon 8-Channel 18650 Battery Tester (Model E26150). This device is designed for testing the capacity and performance of 18650 lithium-ion batteries, offering multiple operation modes and comprehensive data display. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage to the device or batteries.

2. Saugos informacija

Svarbūs saugos patarimai:

• Maitinimas: Use only a 5VDC, 10A power supply. Overvoltage will inevitably burn out the machine.
• Suderinamumas su baterijomis: This 18650 battery holder is only applicable to flat-head 18650 battery tests. It is not suitable for pointed-head 18650 or other battery specifications. Before use, adjust the spring piece and the tightness with pointed-nose pliers if necessary.
• Baterijos tipas: This equipment is suitable for charging of lithium iron phosphate battery. The lithium iron phosphate battery for test can only operate in discharge mode. Charging, automatic and active modes are prohibited.
• Pažeistos baterijos: Įjungimo bandymas neleidžiamas, jei akumuliatorius pažeistas arba teka.
• Profesionalus naudojimas: Aktyvus režimas priklauso priverstinio įkrovimo režimui, kurio negali naudoti neprofesionalūs darbuotojai ir darbuotojai neturi palikti aikštelės naudojimo metu.
• Šilumos išsklaidymas: Heat will be generated during charging and discharging. Keep away from inflammables during use!
• Atvirkštinio ryšio apsauga: The tester incorporates reverse connection protection for both the power supply and batteries, preventing device damage from incorrect connections.
• Apsauga nuo perkaitimo: Overheat protection and active heat dissipation mechanisms ensure operational safety and prevent overheating during extended test sessions.
• External Test Terminals: When using external test terminals (2P terminals), ensure that only one channel is connected to either the battery base or the external test. Do not test both simultaneously on the same channel.

3. Produktas baigtasview ir komponentai

The KKnoon 8-Channel 18650 Battery Tester is a compact and lightweight device designed for comprehensive battery analysis. It features an intuitive 2.4-inch TFT display and 8 independent channels.

3.1. Įrenginio išdėstymas

This image displays the overall layout of the battery tester, highlighting the eight individual battery slots, two cooling fans for active heat dissipation, and the central 2.4-inch TFT display. The power input and control buttons are also visible.

3.2. Pagrindiniai komponentai

This image provides a closer look at the various interfaces and components:

• Maitinimo sąsaja: DC5.5 interface and 5V positive/negative welding spots.
• Valdymo skydelis: Includes buttons for CHN Switch, Run/Stop, S-SET, and MENU.
• Ekranas: 2.4-inch TFT screen for real-time data.
• Aušinimo ventiliatorius: For active heat dissipation.
• Baterijų laikikliai: Eight slots for 18650 batteries.
• External Test Terminals: 2P terminals for external discharge testing (Point B).
• Būklės rodikliai: LEDs indicating channel status (Off is Stop, Flash is Running, ON is Complete).

4. Techninės specifikacijos

5. Sąranka

Follow these steps to set up your KKnoon 8-Channel 18650 Battery Tester for operation.

1. Prijunkite maitinimą: Connect a 5VDC, 10A power supply to the DC5.5 power interface. Ensure the power supply meets the specifications to prevent damage.
2. Įdėkite baterijas: Carefully insert the 18650 batteries into the designated slots, paying attention to the positive and negative poles. Ensure correct polarity to avoid triggering reverse connection protection.
3. Pradinis patikrinimas: After connecting power and inserting batteries, the device will power on. Observe the 2.4-inch TFT display for initial status.
4. Pasiruošimas testui: The device is now ready for test configuration. Do not leave the site unattended during testing.

This image illustrates the basic steps for using the tester as displayed on its screen, including connecting the 5V/10A power supply, inserting batteries with correct polarity, starting the test program, and checking the results.

6. Naudojimo instrukcijos

The tester offers multiple operation modes for various battery testing needs.

6.1. Veikimo režimai baigtiview

This diagram visually explains the sequence of operations for the AUTO, CHG (Charge), DSG (Discharge), and ACTI (Activate) modes. Each mode has specific steps like 'Run', 'Charge Complete', 'Discharge Complete', and 'Test Complete'.

6.2. Mode Selection and Parameter Setting

Use the control buttons (CHN Switch, Run/Stop, S-SET, MENU) to navigate through the modes and adjust parameters.

• MENIU mygtukas: Press to access the main menu for mode selection and parameter adjustments.
• S-SET Button: Used to set specific parameters within a selected mode (e.g., charge/discharge stop voltage, termination current, stop time).
• CHN Switch: Allows switching between individual channels for viewparametrų nustatymas.
• Paleisti/sustabdyti: Starts or stops the current operation on the selected channel(s).

6.2.1. AUTOMATINIS režimas

The AUTO mode performs a charge-discharge-charge cycle to determine battery capacity. Only one cycle is supported.

• Select AUTO mode from the menu.
• Set desired charge stop voltage, išleidimo sustabdymo tūristage, and charge termination current.
• Press Run/Stop to begin the automatic cycle.

6.2.2. CHG (Charge) Mode

Charges the battery to a specified voltage.

• Select CHG mode.
• Set the desired charge stop voltage (3.7V to 4.2V, 6 levels).
• Set the charge termination current (100mA, 200mA, 300mA).
• Press Run/Stop to start charging.

6.2.3. DSG (Discharge) Mode

Discharges the battery to a specified voltage to measure capacity.

• Select DSG mode.
• Set the desired discharge stop voltage (2.0V to 3.6V, 17 levels).
• Press Run/Stop to start discharging.

6.2.4. ACTI (Activate) Mode

This is a forced charging mode. Use with caution and only if you are a professional. Do not leave unattended.

• Select ACTI mode.
• Set the activation voltage (pvz., 4.2 V).
• Press Run/Stop. Note that auto-stopping may not be available in this mode.

6.3. Kanalų sinchronizavimas

The device supports 8-channel setting synchronization, allowing you to apply the same parameters to multiple channels simultaneously, or set parameters individually for each channel.

This image displays the on-screen menu, showing options for 'Sync CHN Setting', 'Mode', 'Vol-CHG1', 'Vol-CHG2', 'Cur-CHG', 'Vol-STOP', 'Wati', and 'Min'. These parameters can be adjusted for individual channels or synchronized across multiple channels.

7. Sąsajos ekranas

The 2.4-inch TFT display provides comprehensive real-time data and status information.

This image shows two main display views:

• 8-Channel Overview: Displays a summary of the status for all eight channels simultaneously, including voltage, srovė ir talpa.
• Single Channel Detailed Display: Provides in-depth information for a selected channel, such as real-time voltage, current, operating status, measured capacity, and total program execution time.

7.1. Data Points Explained

This image highlights and explains the various data points shown on the TFT display during operation:

1. Kanalo indikacija
2. Real-time status indication (e.g., CHG/Discharge)
3. STOP / END (AWAIT / DSG(discharge))
4. Realaus laiko akumuliatoriaus talpatage indikacija
5. Realaus laiko darbo srovės rodymas
6. Talpos matavimas
7. Bendras programos vykdymo laikas (valandos: minutės: sekundės)
8. Battery internal resistance (measured by DC two-wire method)

The display also supports single channel charge and discharge curve display, providing a visual representation of battery performance over time.

8. Priežiūra

• Valymas: Įrenginį valykite minkšta, sausa šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: Laikykite testerį vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Patikra: Periodically inspect the power cable and battery holders for any signs of damage.
• Firmware: Patikrinkite gamintojo websvetainėje, kurioje pateikiami visi galimi programinės įrangos atnaujinimai.

9. Problemų sprendimas

10. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please refer to the official KKnoon websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Gamintojas: KKnoon
Modelis: E26150