Varstrom 48V 17.5Ah Rear Rack Ebike Battery Instruction Manual

Įvadas

This manual provides essential instructions for the safe and efficient use of your Varstrom 48V 17.5Ah Rear Rack Ebike Battery. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of your battery.

Image: The Varstrom 48V 17.5Ah Rear Rack Ebike Battery, its dedicated charger, and the accompanying rear rack for mounting.

Saugos informacija

Jūsų saugumas yra svarbiausias. Laikykitės šių gairių:

• Venkite trumpojo jungimo: Never short-circuit the battery terminals. This can cause permanent damage to the battery and pose a fire hazard.
• Įkrovimo praktika: Recharge the battery before it is completely depleted for optimal life. Disconnect the charger once the indicator turns green to prevent overcharging.
• Integruota apsauga: The battery features a Battery Management System (BMS) for overcurrent, overvoltage, overload, overcharge, overdischarge, temperature, and short-circuit protection. Each cell is also equipped with a fuse.
• Saugus montavimas: Ensure the battery is securely locked onto the rear rack to prevent theft and accidental dislodgement during operation.
• Aplinkos sąlygos: Avoid exposing the battery to extreme temperatures, direct sunlight for prolonged periods, or moisture.

Image: Visual representation of the Varstrom Rear Rack Battery highlighting its multiple safety features, including overcurrent, overvoltage, overload, overcharge, overdischarge, temperature, short circuit protection, and cell voltage balansavimas.

Produktas baigtasview ir Savybės

The Varstrom 48V 17.5Ah Rear Rack Ebike Battery is designed for electric bike motor kits ranging from 50W to 1200W. It offers reliable power and integrated safety features.

Pagrindinės funkcijos:

• Suderinamumas: Suitable for 0-1200W electric bike motor kits (e.g., BAFANG, Voilamart, AW, Ebikeling, Pexmor, L-Fater).
• Didelė talpa: 48V 17.5Ah (840Wh) for extended range.
• Ilgas ciklo gyvenimas: Retains ≥80% capacity after 800 cycles, with an estimated lifespan of up to 5 years.
• Integrated Lock System: Secures the battery to the rack and deters theft.
• Maitinimo jungiklis: Helps conserve power when the battery is not in use.
• LED maitinimo indikatorius: Provides real-time battery charge status.
• Nuimamas dizainas: Allows for convenient charging off the bike.
• XT60 Female Discharge Connector: Standard connector for motor kits.
• 6-Pin Battery Base: For secure connection to the rack.
• USB prievadas: Skirta išoriniams įrenginiams įkrauti.

Vaizdas: Išsamus views of the battery's components: the secure lock with keys, the XLR charging port, the 6-pin gold-plated discharge port, the XT60 battery connector, and the integrated USB port for device charging.

Paveikslėlis: sprogęs view diagram illustrating the internal shockproof shell structure and the secure cell holder designed to protect the battery cells.

Specifikacijos

Image: Detailed diagram illustrating the dimensions of the Varstrom 48V 17.5Ah Rear Rack Ebike Battery and its mounting rack, along with key specifications like energy, cell type, discharge port, and cycle life.

Sąranka ir diegimas

Follow these steps to properly install your Varstrom Rear Rack Ebike Battery and its accompanying rack.

Pakavimo sąrašas:

• 1 * 48V 17.5Ah Rear Rack Battery
• 1 * Battery Fix Plate
• 1 * Rear Rack
• 1 * Įkroviklis
• 2 * Keys
• 1 * 50A Fuse
• 1 * Naudotojo vadovas (šis dokumentas)
• Accessories (mounting hardware)

Diegimo žingsniai:

1. Step 1: Assemble the Rear Rack. Attach the support arms to the main rack frame using the provided hardware. Ensure all connections are secure.
2. Step 2: Mount the Rack to your Bicycle. Securely attach the assembled rear rack to your bicycle's seat stays and dropout eyelets. Adjust the rack to be level and stable.
3. Step 3: Install the Battery Fix Plate. Mount the battery fix plate onto the rear rack. This plate will serve as the base for the battery.
4. 4 veiksmas: prijunkite laidus. Route the battery's discharge cable and any other necessary wiring (e.g., for the brake light) from the battery fix plate to your motor controller. Ensure the XT60 connector is accessible for connection to your motor.
5. Step 5: Slide in the Battery. Carefully slide the battery onto the fix plate on the rear rack. Ensure it clicks into place.
6. Step 6: Lock the Battery. Use the provided key to lock the battery onto the rack. This prevents theft and secures the battery during riding.

Image: A step-by-step visual guide demonstrating the installation process of the Varstrom Rear Rack Ebike Battery, from assembling the rack to securing the battery on the bicycle.

Naudojimo instrukcijos

Baterijos įkrovimas:

1. Ensure the battery's power switch is in the "OFF" position.
2. Connect the charger to a standard AC power outlet. The charger's indicator light will typically show red.
3. Connect the charger's output plug (XLR-3PIN) to the charging port on the battery.
4. The charger indicator light will turn green when the battery is fully charged. Disconnect the charger from the battery and then from the power outlet.
5. Pastaba: The maximum charge current is 4A. Do not use chargers exceeding this specification.

Baterijos naudojimas:

1. Ensure the battery is securely locked onto the rear rack.
2. Turn the battery's power switch to the "ON" position. The LED power indicator lights will illuminate, showing the current charge level.
3. Connect the XT60 discharge connector from the battery to your ebike motor controller.
4. Operate your ebike as per its specific instructions.
5. When finished riding, turn the battery's power switch to the "OFF" position to conserve power.

USB įkrovimo prievadas:

The integrated USB port allows for convenient charging of small electronic devices (e.g., smartphones) during your ride. Simply connect your device's USB cable to the port on the battery.

Priežiūra

• Reguliarus įkrovimas: For optimal battery life, avoid completely depleting the battery. Recharge it regularly, even if not fully discharged.
• Saugykla: If storing the battery for an extended period, charge it to approximately 50-60% capacity. Store in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 2-3 months to prevent deep discharge.
• Valymas: Išvalykite bateriją casing with a soft, dry cloth. Do not use water or cleaning agents directly on the battery or its ports.
• Jungties patikrinimas: Periodically inspect the charging and discharge connectors for any signs of wear, corrosion, or damage.
• Temperatūros valdymas: Avoid operating or charging the battery in extremely hot or cold conditions. Optimal operating temperature is typically between 0°C and 45°C (32°F and 113°F).

Trikčių šalinimas

This section addresses common issues you might encounter with your ebike battery.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Varstrom customer support.

Garantija ir palaikymas

Garantijos aprašymas: Varstrom offers a 30-day return policy and a 365-day repair or replacement warranty for this product.

For warranty claims, technical support, or any questions regarding your Varstrom 48V 17.5Ah Rear Rack Ebike Battery, please refer to the contact information provided with your purchase or visit the official Varstrom websvetainę.

Prašome išsaugoti pirkimo įrodymą garantijos galiojimui.