„CipherLab WR30“ standartinės serijos 2D vaizdo gavimo įrenginio naudotojo vadovas

Įvadas

This manual provides essential information for the proper use, setup, operation, and maintenance of your CipherLab WR30 Standard Series 2D Imager. The WR30 is a high-performance 2D imager designed for efficient data capture, featuring a Standard Range 2D Imager (SE4770) and a kit that includes a ring trigger and a UK adapter. Please read this manual thoroughly before operating the device to ensure optimal performance and safety.

Saugos informacija

Kad išvengtumėte sužalojimų ir įrenginio pažeidimų, laikykitės šių saugos priemonių:

• Nelaikykite prietaiso nuo ekstremalių temperatūrų, drėgmės ar tiesioginių saulės spindulių.
• Avoid dropping the device or subjecting it to severe impacts.
• Nebandykite ardyti ar modifikuoti įrenginio. Visus techninės priežiūros darbus patikėkite kvalifikuotiems darbuotojams.
• Use only the specified power adapter (UK adapter) provided with the kit.
• Laikykite prietaisą atokiau nuo skysčių ir ėsdinančių medžiagų.
• Do not stare directly into the imager's light source when in operation.

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• CipherLab WR30 Standard Range 2D Imager (SE4770)
• Žiedo gaidukas
• JK maitinimo adapteris
• Šis vartotojo vadovas

Sąranka

Attaching the Ring Trigger

1. Carefully align the CipherLab WR30 imager with the mounting mechanism on the ring trigger.
2. Gently slide the imager onto the trigger until it clicks securely into place. Ensure a firm connection.
3. Test the connection by gently pulling on the imager; it should not detach easily.

Įrenginio įjungimas

1. Connect the UK power adapter to a suitable power outlet.
2. Plug the adapter's connector into the power port on the CipherLab WR30 imager.
3. The device will typically power on automatically or indicate readiness with an LED light. Refer to the device's LED indicator guide for specific status meanings.

1 paveikslas: The CipherLab WR30 Standard Series 2D Imager shown with its integrated ring trigger. The device is black with a yellow trigger button, designed for ergonomic handling and efficient barcode scanning. The front features the imager lens, and the top surface has ventilation grilles and the CipherLab logo.

Prietaiso valdymas

Brūkšninių kodų nuskaitymas

1. Ensure the device is powered on and connected to your host system (e.g., computer, mobile device) via its communication interface (e.g., Bluetooth, USB, if applicable).
2. Point the imager window directly at the barcode you wish to scan.
3. Press and hold the ring trigger button. A red aiming beam or illumination light will appear.
4. Nukreipkite taikymo spindulį virš brūkšninio kodo centro.
5. Once the barcode is successfully read, the device will typically emit an audible beep and/or a visual indicator (e.g., green LED).
6. Atleiskite gaiduko mygtuką.

The Standard Range 2D Imager (SE4770) is optimized for reading various 1D and 2D barcodes from typical scanning distances.

Ryšys

The CipherLab WR30 supports various connectivity options depending on the specific model configuration. Refer to your device's quick start guide or technical specifications for details on pairing with Bluetooth-enabled devices or connecting via USB.

Priežiūra

Prietaiso valymas

• Turn off the device and disconnect it from any power source before cleaning.
• Lengvai naudokite minkštą, nepūkuotą audinį dampened with water or a mild, non-abrasive cleaner to wipe the exterior of the device.
• For the imager window, use a lens cleaning cloth or a soft cloth with a small amount of lens cleaner. Do not use abrasive materials or harsh chemicals.
• Ensure no liquid enters the device's openings.
• Allow the device to dry completely before reconnecting power or operating.

Sandėliavimas

When not in use, store the CipherLab WR30 in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and physical damage.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

CipherLab products are designed for reliability and performance. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official CipherLab website. For technical support, troubleshooting assistance, or service inquiries, please contact CipherLab customer support through their official channels.

Palaikymas internetu: Visit the official CipherLab webDUK, tvarkyklių ir programinės įrangos atsisiuntimų svetainė.

Kontaktinė informacija: Refer to the CipherLab website or your product packaging for regional contact details.