DIGITEN drėgmės reguliatoriaus DHC312 naudotojo vadovas

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of the DIGITEN DHC312 Humidity Controller. This pre-wired digital humidistat is designed to regulate and maintain desired humidity levels in various environments, offering both humidification and dehumidification capabilities. It also features a real-time temperature display for comprehensive environmental management.

Image 1.1: The DIGITEN DHC312 Humidity Controller, showing the main unit, power outlet, power plug, and humidity sensor.

2. Produkto ypatybės

• High-Precision Swiss-Imported Humidity Sensor: Regulates humidity within 5% to 99% RH with an accuracy of ±3%RH.
• Realaus laiko temperatūros rodymas: Monitors ambient temperature (Note: The device measures temperature but does not control it).
• Convenient Plug & Play Operation: Non-programmable design for ease of use; no complex programming required.
• Intelligent Dual-Stage Valdymas: Seamlessly switches between humidification and dehumidification modes. Requires humidifiers with automatic restart functions.
• Universalios programos: Suitable for home brewing, reptile habitats, greenhouses, mushroom cultivation, grow tents, meat drying, and incubation.
• Papildomos funkcijos: Supports switching between °C/°F, calibration, and compressor delay functions.

2.1 vaizdas: Baigtaview of the DHC312 controller highlighting its key features such as large screen, dual-mode operation, and plug-and-play functionality.

2.2 pav.: Išsamus view of the high-precision Swiss-imported humidity sensor, emphasizing its compact design and internal components.

3. Pakuotės turinys

The DIGITEN DHC312 Humidity Controller package includes the following items:

• 1 x DIGITEN DHC312 Humidity Controller Unit
• 1 x Vartotojo vadovas

Image 3.1: The complete package contents, showing the main controller unit, the dual-outlet power strip, the humidity sensor, and the instruction manual.

4. Specifikacijos

Image 4.1: Visual representation of the controller's dimensions and key technical specifications.

5. Sąrankos instrukcijos

The DIGITEN DHC312 is designed for plug-and-play convenience. Follow these steps for initial setup:

1. Vieta: Position the main controller unit in a stable location.
2. Jutiklio jungtis: Ensure the humidity sensor is securely connected to the main controller unit. Place the sensor probe in the environment where humidity needs to be monitored and controlled. Avoid placing it near direct airflow or heat sources for accurate readings.
3. Maitinimo jungtis: Plug the controller's power plug into a standard electrical outlet (100-240VAC).
4. Prietaiso prijungimas:
   • For humidification, plug your humidifier into the outlet labeled "HUMIDIFICATION" on the dual-stage power strip.
   • For dehumidification, plug your dehumidifier or exhaust fan into the outlet labeled "DEHUMIDIFICATION".

   Svarbu: Ensure your humidifier has an automatic restart function for seamless operation with this controller.

Image 5.1: The dual-relay power strip connected to the controller, illustrating the separate outlets for humidification and dehumidification appliances.

6. Naudojimo instrukcijos

The DHC312 features a clear digital display and intuitive buttons for easy operation.

6.1 Ekranas baigtasview

6.1 pav.: Išsamus view of the controller's LCD screen, indicating various display elements such as current temperature, current humidity, and set humidity.

• Darbo režimas: Indicates whether the unit is in humidification or dehumidification mode.
• Dabartinė temperatūra: Displays the real-time ambient temperature.
• Dabartinis drėgnumas: Shows the real-time ambient humidity percentage.
• Setting Humidity (SET): Displays the target humidity percentage jūs nustatėte.
• Difference (DIFF): Indicates the humidity differential setting.
• Calibration (CA): Indicates if calibration is active.

6.2 Tikslinio drėgnumo nustatymas

1. Paspauskite Up (▲) arba Žemyn (▼) button to adjust the target humidity value (SET).
2. After setting the desired value, wait approximately 5 seconds. The controller will automatically save the setting and return to the normal display mode.

6.3 Advanced Settings (Temperature Unit, Difference, Calibration)

1. Ilgai paspauskite mygtuką NUSTATYTI button for 3 seconds until the °C or °F indicator flashes.
2. While the indicator is flashing, short press the NUSTATYTI button to cycle through the advanced settings: Temperature Unit (°C/°F), Difference (DIFF), and Calibration (CA).
3. Naudokite Up (▲) arba Žemyn (▼) buttons to adjust the value for the selected setting.
4. Ilgai paspauskite mygtuką NUSTATYTI button for 3 seconds to save the changes and exit the advanced settings menu.

Image 6.2: Step-by-step guide on setting the target humidity and accessing advanced functions like °C/°F switching, difference, and calibration.

6.4 Humidification and Dehumidification Logic

The controller operates based on the set humidity value and the difference (DIFF) setting:

• Drėkinimas: The humidification outlet turns ON when the measured humidity is ≤ (Setting Value - DIFF). It turns OFF when the measured humidity is ≥ Setting Value.
• Sausinimas: The dehumidification outlet turns ON when the measured humidity is ≥ (Setting Value + DIFF). It turns OFF when the measured humidity is ≤ Setting Value.

6.3 pav.: pvz.amples of the controller managing humidity in a greenhouse (humidification) and a poultry farm (dehumidification).

7. Kalibravimas

The DHC312 allows for humidity calibration to ensure accuracy. If you have a trusted reference hygrometer, you can adjust the controller's reading.

1. Access the advanced settings menu by long pressing the NUSTATYTI mygtuką 3 sekundes.
2. Trumpai paspauskite NUSTATYTI button until 'CA' (Calibration) is displayed.
3. Naudokite Up (▲) arba Žemyn (▼) buttons to adjust the calibration value. This value will offset the measured humidity.
4. Ilgai paspauskite mygtuką NUSTATYTI mygtuką 3 sekundes, kad išsaugotumėte ir išeitumėte.

8. Problemų sprendimas

If you encounter issues with your DIGITEN DHC312, refer to the following common problems and solutions:

9. Priežiūra

To ensure the longevity and accurate performance of your DIGITEN DHC312 Humidity Controller, follow these maintenance guidelines:

• Valymas: Periodically wipe the main unit and display with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• Jutiklio priežiūra: Keep the humidity sensor clean and free from dust, debris, or moisture buildup. Gently clean the sensor housing if necessary.
• Saugykla: If storing the controller for an extended period, disconnect it from power, clean it, and store it in a cool, dry place away from direct sunlight and extreme temperatures.
• Aplinkos sąlygos: Avoid exposing the controller to corrosive gases, high humidity (beyond its operating range), or extreme temperatures, which can affect its performance and lifespan.

10. Garantija ir palaikymas

DIGITEN provides a one-year warranty for any quality problems encountered with this product. For technical support, warranty claims, or further assistance, please contact DIGITEN customer service through your purchase platform or the official DIGITEN websvetainę.

For more information about DIGITEN products, please visit the DIGITEN Store.