Įvadas
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Saugos informacija
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Pakuotės turinys
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Kėdės pagrindas su ratukais
- Dujų kėlimo cilindras
- Sėdynės surinkimas
- Atlošo surinkimas
- Galvos atrama
- Porankiai (kairysis ir dešinysis)
- Footrest (if applicable to your model)
- Surinkimo detalės (varžtai, poveržlės, šešiabriaunis raktas)
- Instrukcijų vadovas
Surinkimo instrukcijos
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Kėdės pagrindo surinkimas: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Pritvirtinkite porankius: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Pritvirtinkite atlošą: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Atsargiai uždėkite surinktą sėdynę ir atlošą ant dujinio pakėlimo cilindro, užtikrindami, kad jie būtų centre ir stabilūs.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Naudojimo instrukcijos ir reguliavimas
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Sėdynės aukščio reguliavimas
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Vertikalus reguliavimas: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D reguliuojami porankiai
The armrests provide versatile support and can be adjusted in three dimensions:
- Aukščio reguliavimas: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Pasukimas: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Galvos atramos reguliavimas: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Atlošimo funkcija: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Vaizdas: Stambus planas view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Priežiūra
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Tinklinio audinio valymas: The breathable mesh fabric can be cleaned with a damp audinys ir švelnus muilas. Venkite stiprių cheminių medžiagų.
- Rėmo valymas: Wipe the alloy steel frame and plastic components with a soft, damp audinys.
- Ratų priežiūra: Reguliariai tikrinkite ratus, ar ant jų nėra plaukų ar šiukšlių, ir prireikus nuvalykite, kad jie judėtų sklandžiai.
- Priveržkite tvirtinimo detales: Kas kelis mėnesius patikrinkite visus varžtus ir veržles, ar jie tvirtai priveržti. Jei reikia, priveržkite, kad išlaikytumėte stabilumą.
Vaizdas: Padidintas view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Kėdės aukštis nereguliuojamas | Dujų pakėlimo cilindro gedimas arba neįjungta svirtis. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement. Contact customer support. |
| Kėdė kliba arba jaučiasi nestabili | Atsilaisvinę varžtai arba nelygios grindys. | Patikrinkite ir priveržkite visus surinkimo varžtus. Įsitikinkite, kad kėdė stovi ant lygaus, lygaus paviršiaus. |
| Porankiai yra laisvi | Tvirtinimo varžtai atsilaisvinę. | Tighten the screws securing the armrests to the seat. |
| Atlošas neatlenkiamas arba neužsifiksuoja | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Specifikacijos
- Prekinis ženklas: Hbada
- Modelis: E2
- Spalva: Juoda
- Gaminio matmenys: 30.51 "D x 22.24" P x 18.11" A
- Atgal stilius: Tinklelis
- Amžiaus diapazonas (aprašas): Suaugęs
- Rankenos stilius: Padded, 3D Adjustable
- Užpildo medžiaga: Tinklelis
- Medžiaga: Alloy Steel (Frame), Mesh (Seat/Back)
- Gulėjimo padėčių skaičius: 3 (iki 135 laipsnių)
- Pakreipimas: Taip
- Formos faktorius: Biuro kėdė
Garantija ir palaikymas
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Dalių keitimas: Parts are replaced, not repaired, for covered issues.
- 30 dienų grąžinimo politika: Enjoy a 30-day return period without specific reasons required.
- Pažeista atvykus: Repair and replacement are guaranteed for items damaged during shipping.
- Klientų aptarnavimas: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Norėdami gauti daugiau informacijos, apsilankykite Hbada Store on Amazon.
