1. Įvadas
The Gedsffati HD08-G-B is a combined gas and carbon monoxide (CO) detector designed for household use. This device continuously monitors the levels of carbon monoxide and various combustible gases, including natural gas, liquefied petroleum gas (LPG), methane (CH4), ethane (C2H6), propane (C3H8), and butane (C4H10). It features high-precision sensors for rapid and accurate detection, with a sensor lifespan of approximately 5 years. In addition to gas detection, the HD08-G-B also measures and displays ambient temperature and humidity.
This manual provides essential information for the proper setup, operation, and maintenance of your Gedsffati HD08-G-B detector to ensure its optimal performance and your safety.
2. Produkto ypatybės
- Kombinuotas aptikimas: Monitors both carbon monoxide (CO) and combustible gases.
- Didelio našumo jutikliai: Utilizes electrochemical and semiconductor resistance change principles for quick and accurate detection.
- Stebėjimas realiuoju laiku: Sensors operate every 2 seconds for near real-time detection.
- Daugiafunkcinis ekranas: Shows CO concentration, gas levels, temperature, and humidity.
- Garsiniai ir vaizdiniai pavojaus signalai: Provides distinct alarms for different gas concentrations.
- Integruota įkraunama baterija: 1000 mAh lithium battery provides backup power for approximately 8 hours during power outages.
- Plug and Play: Easy installation by simply plugging into a standard electrical outlet.
3. Sąranka ir diegimas
The Gedsffati HD08-G-B detector is designed for simple installation. Follow these steps:
- Išpakuokite įrenginį: Atsargiai išimkite detektorių iš pakuotės.
- Pasirinkite vietą: Select a suitable location for installation. For optimal detection, place the detector in areas where gas leaks or CO accumulation are most likely, such as near gas appliances (stoves, water heaters) or in living areas. Avoid placing it directly above heat sources, near windows, or in areas with high humidity.
- Prijunkite: Insert the detector directly into a standard AC 100-240V/50-60Hz electrical outlet. The device will automatically power on and begin monitoring.
- Initial Self-Test: Upon first power-up, the device may perform an automatic self-test. Observe the display for any error indicators.
1 paveikslas: Priekinė ir galinė dalys view of the Gedsffati HD08-G-B detector, illustrating its compact design and plug for direct insertion into an electrical outlet.
Image 2: The Gedsffati HD08-G-B detector in operation, plugged into a wall socket, showcasing its real-time monitoring capabilities for CO and combustible gas concentrations.
4. Naudojimo instrukcijos
4.1. Mygtukų funkcijos
The device features three control buttons on the front panel:
- Mygtukas H:
- Short press: Changes the screen brightness.
- O mygtukas:
- Short press: Initiates a self-test.
- Long press: Powers the device on or off.
- D mygtukas:
- Short press: Toggles the buzzer (audible alarm) on or off.
- Long press: Changes the temperature unit (e.g., Celsius to Fahrenheit).
3 pav.: Išsamus view of the detector's display and the three control buttons (H, O, D) located at the bottom, used for various settings and functions.
4.2. Signalizavimo funkcijos
The device provides distinct visual and audible alarms based on detected gas concentrations:
4.2.1. Carbon Monoxide (CO) Alarm
- 0–50 ppm: No alarm. The CO icon on the display remains green.
- 51–200 ppm: The device emits an audible alarm every 3 minutes. The CO icon turns yellow and flashes.
- 201–999 ppm: The device emits a continuous audible alarm. The CO icon turns red and flashes.
4.2.2. Flammable Gas Alarm
- Nėra degių dujų: No alarm. The green combustible gas icon flashes.
- Maža koncentracija: The device emits an audible alarm every 3 minutes. The yellow combustible gas icon flashes.
- Vidutinė koncentracija: The device emits an audible alarm every 3 minutes. The orange combustible gas icon flashes.
- Didelė koncentracija: The device emits a continuous audible alarm. The red combustible gas icon flashes.
Image 4: The detector displaying an alarm condition, with CO levels at 225 PPM and gas detection, accompanied by visual and audible alerts to indicate potential danger.
Image 5: The detector in a normal operating state, indicated by a green light, showing low CO concentration (45 PPM) and normal gas levels. A short press on the 'O' button initiates a self-test.
4.3. Akumuliatoriaus atsarginė kopija
The Gedsffati HD08-G-B includes a built-in 1000 mAh lithium battery. In the event of a power outage, the device will automatically switch to battery power, providing approximately 8 hours of continuous operation. This ensures uninterrupted monitoring even when AC power is unavailable.
Image 6: Illustration of the detector's built-in rechargeable battery, emphasizing its 1000 mAh capacity and ability to provide backup power for 9-10 hours during electrical outages.
5. Priežiūra
- Reguliarus valymas: Gently wipe the exterior of the detector with a soft, dry cloth to remove dust. Do not use cleaning agents or solvents.
- Savęs išbandymas: Perform a self-test regularly (e.g., monthly) by short-pressing the 'O' button to ensure the sensors and alarm functions are working correctly.
- Jutiklio tarnavimo laikas: The sensors in this device have an approximate lifespan of 5 years. After this period, consider replacing the unit to ensure continued accuracy and reliability.
- Akumuliatoriaus įkrovimas: Ensure the device remains plugged into an AC outlet to keep the internal battery charged.
6. Problemų sprendimas
If the detector alarms or displays an error, follow these guidelines:
- Signalizacijos garsai:
- If the CO alarm sounds, immediately move to fresh air and call emergency services. Do not re-enter the area until it has been deemed safe by professionals.
- If the combustible gas alarm sounds, immediately turn off all gas appliances, open windows and doors to ventilate the area, and contact your gas provider or emergency services.
- Error Indication (Red Light/Mute Error): If the device displays a red light or indicates a "mute error" or sensor malfunction, perform a self-test by short-pressing the 'O' button. If the error persists, the device may require service or replacement.
- Nėra ekrano / maitinimo: Ensure the device is securely plugged into a working electrical outlet. If operating on battery, ensure the battery is charged.
7. Specifikacijos
| Modelis | HD08 |
| Aptinkamos degiosios dujos | Natural gas, LPG, methane (CH4), ethane (C2H6), propane (C3H8), butane (C4H10), etc. |
| Carbon Monoxide Measurement Range | 0-999 ppm (± 5%) |
| Temperatūros matavimo diapazonas | -10 ℃ to 50 ℃ / 14 °F to 122 °F (± 3%) |
| Drėgmės matavimo diapazonas | 5% to 95% RH (± 5%) |
| Sensor Detection Frequency | Kartą per 2 sekundes |
| Maitinimo šaltinis | AC 100-240 V / 50-60 Hz |
| Integrated Lithium Battery | 1000 mAh (3.7 Wh @ 3.7 V) |
| Veiklos ttage ir srovė | 5 V / 1 A |
| Darbo aplinka | -10 ℃ to 60 ℃ / 14 °F to 140 °F, 20% to 80% RH |
| Matmenys (I x P x A) | 8.5 x 5.1 x 3.3 cm |
| Svoris | 60 gramų |
| Medžiaga | ABS plastikas |
| UPC | 747086495466 |
Image 7: An exploded diagram illustrating the internal structure and high-precision sensors of the Gedsffati HD08-G-B detector, highlighting its advanced technology.
8. Saugos informacija
Please read and understand all safety information before using this product:
- Šis prietaisas skirtas naudoti tik buityje.
- Do not paint the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings of the detector.
- Test the detector regularly as described in the maintenance section.
- This device is not a substitute for proper installation, use, and maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.
- Do not ignore any alarms. Investigate the cause immediately.
- Laikyti vaikams nepasiekiamoje vietoje.
9. Garantija ir palaikymas
For warranty information or technical support, please refer to the documentation included with your purchase or contact Gedsffati customer service. Keep your purchase receipt as proof of purchase.
