1. Produktas baigtasview
This manual provides instructions for the installation and maintenance of the YITAMOTOR Fender Flares Kit. These fender flares are designed to provide additional tire coverage and protection for your vehicle's wheel wells.
The fender flares are constructed from high-quality polypropylene (PP) material, engineered for durability and resistance to deformation, shrinkage, and cracking, even in various climates. They feature a smooth black finish and are UV-resistant. The flares can also be painted to match your vehicle's color preferences.
Image: Four individual YITAMOTOR fender flares, showcasing gaminio dizainą.
2. Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- 1 x Fender Flares Kit (4 pieces: 2 front, 2 rear)
- 1 x Set of Mounting Hardware (including 304 stainless steel screws)
- 1 x naudojimo instrukcija (šis dokumentas)
3. Gaminio specifikacijos
| Atributas | Detalė |
|---|---|
| Prekės ženklas | YITAMOTOR |
| Modelio numeris | MAYIM2msJi |
| Medžiaga | Polipropilenas (PP) |
| Išorinė apdaila | Sklandžiai juoda |
| Spalva | Black (Paintable) |
| Prekės svoris | 16.54 svaro |
| Gaminio matmenys (I x P x A) | 49.21 x 11.02 x 31.69 colio |
| Tinkamo tipo | Specialus pritaikymas transporto priemonei |
| Transporto priemonės paslaugos tipas | 2019-2024 Chevy Silverado 1500 (Excl. 2019 LD) |
Image: Technical drawing illustrating the dimensions of the front and rear fender flares.
4. Diegimo vadovas
Follow these steps for proper installation of your YITAMOTOR Fender Flares. No cutting is required for installation.
4.1. Išankstinis montavimas
- Patikrinkite komponentus: Unpack the fender flares and mounting hardware. Verify all parts are present and undamaged.
- Clean Vehicle Surface: Thoroughly clean the area around the wheel wells where the fender flares will be installed. Ensure surfaces are free of dirt, debris, and wax.
- Testo atitikimas: Temporarily hold each fender flare against its corresponding wheel well to ensure proper alignment and fitment before permanent installation.
Image: A person bending a fender flare to show its flexible material, aiding in installation.
4.2. Montavimo procesas
- Sulygiuokite ir pritvirtinkite: Position the fender flare onto the wheel well. The flares are designed with pre-drilled slots and holes that align with existing mounting points on your vehicle.
- Įdiekite aparatinę įrangą: Use the provided 304 stainless steel screws and other mounting hardware to secure the fender flares. Ensure all bolts are tightened securely but do not overtighten to avoid damaging the flares or vehicle.
- Repeat for All Flares: Follow the same procedure for installing the remaining three fender flares.
Image: A hand indicating the precise fitment of a fender flare on a truck's wheel well.
Vaizdas: Stambus planas view of a bolt head securing the fender flare, highlighting the bolt-riveted design.
4.3. Po įrengimo
After installation, double-check all mounting points to ensure the flares are securely attached and there are no loose components.
Image: A truck with YITAMOTOR fender flares installed, illustrating the 'no cutting installation' and the smooth black finish.
5. Naudojimas ir funkcijos
The YITAMOTOR Fender Flares are designed to enhance your vehicle's appearance and provide practical benefits:
- Wheel Well Protection: Shields your wheel wells from mud, scratches, and other road debris, especially during off-road driving.
- Patvari konstrukcija: Made from high-impact thermoplastic, resistant to extreme weather conditions, ensuring long-lasting performance.
- Paintable Surface: The smooth black coating allows for custom painting to match or complement your vehicle's color.
Image: A side-by-side comparison showing a truck's wheel well before and after fender flare installation, demonstrating protection from rust and damage.
Image: A fender flare being painted blue, illustrating the product's paintable surface for customization.
6. Priežiūra
To maintain the appearance and longevity of your fender flares:
- Reguliarus valymas: Wash the fender flares regularly with mild soap and water to remove dirt, mud, and road grime.
- Venkite stiprių cheminių medžiagų: Do not use abrasive cleaners or harsh chemicals that could damage the finish or material.
- Periodiškai tikrinkite: Periodically check the mounting hardware for tightness and ensure the flares remain securely attached.
Image: A person cleaning a fender flare on a truck with a pressure washer, demonstrating routine maintenance.
7. Problemų sprendimas
If you encounter any issues during or after installation, consider the following:
- Laisvas kirpimas: Ensure all mounting hardware is correctly installed and tightened. Re-check alignment.
- Trūksta dalių: Refer to the 'Package Contents' section. If parts are missing, contact YITAMOTOR customer support.
- Pritaikymo problemos: Double-check your vehicle's year, make, and model against the product's compatibility information.
8. Garantija ir palaikymas
For warranty information or technical assistance, please refer to the official YITAMOTOR websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
