Fanvil 8-Port 2-Wire PoE Switch

1. Įvadas

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Fanvil 8-Port 2-Wire PoE Switch (Model PN8). Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Produktas baigtasview

The Fanvil PN8 is an 8-port 2-wire Power over Ethernet (PoE) switch designed to transmit both power and data over existing 2-wire cables. This unique capability simplifies installation, especially in environments where traditional Ethernet cabling is not feasible or cost-effective. It supports up to 8 PoE-enabled devices and can transmit data and power over distances up to 300 meters.

2.1 Pagrindinės savybės

• 8 PoE ports for data and power transmission.
• Supports power and data over 2-wire connections.
• Long transmission distance of up to 300 meters.
• User-friendly setup with no complex configuration required.

2.2 Įrenginio išdėstymas

1 paveikslas: Priekyje view of the Fanvil PN8 switch, showing 8 PLC ports, a WAN port, ON/OFF switch, and LED indicators for Network Reset and Power.

2 paveikslas: Kampuotas view of the Fanvil PN8 switch, highlighting the side ventilation and port layout.

2.3 LED indikatoriai

• Network Reset (Green LED): Indicates network activity or status. A steady light typically means a stable connection, while blinking indicates data transmission.
• Maitinimas (raudonas šviesos diodas): Illuminates when the device is powered on and receiving electrical current.

3. Sąrankos instrukcijos

3.1 Pakuotės turinys

Prieš montuodami patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Fanvil 8-Port 2-Wire PoE Switch (PN8)
• Maitinimo adapteris
• Vartotojo vadovas (šis dokumentas)
• Montavimo priedai (jei yra)

3.2 Jungiklio prijungimas

1. Maitinimo jungtis: Connect the provided power adapter to the power input port on the switch and then plug it into a standard electrical outlet (100-240V AC). Ensure the ON/OFF switch is in the OFF position before connecting power.
2. WAN ryšys: Connect your main network router or modem to the WAN port on the Fanvil PN8 switch using a standard Ethernet cable.
3. PoE įrenginio prijungimas: Connect your 2-wire PoE-enabled devices (e.g., IP phones, cameras) to any of the 8 PLC ports on the switch. The switch will automatically detect and provide power and data to these devices.
4. Maitinimas: Flip the ON/OFF switch to the ON position. The Power LED should illuminate, indicating the switch is operational.

4. Jungiklio valdymas

Once connected, the Fanvil PN8 switch operates automatically. It provides power and data to connected PoE devices without requiring additional configuration. The LED indicators provide visual feedback on the device's status.

4.1 Įjungimas / išjungimas

• To power on the switch, ensure the power adapter is connected and flip the ON/OFF switch to the 'ON' position. The red Power LED will light up.
• To power off the switch, flip the ON/OFF switch to the 'OFF' position. The red Power LED will turn off.

5. Priežiūra

To ensure optimal performance and longevity of your Fanvil PN8 switch, follow these maintenance guidelines:

• Valymas: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
• Vėdinimas: Ensure the switch is placed in a well-ventilated area. Do not block the ventilation openings on the sides of the device.
• Aplinka: Saugokite jungiklį nuo ekstremalių temperatūrų, didelės drėgmės ar tiesioginių saulės spindulių.

6. Problemų sprendimas

If you encounter issues with your Fanvil PN8 switch, refer to the following table for common problems and solutions:

7. Techninės specifikacijos

8. Garantija ir palaikymas

Dėl garantijos informacijos ir techninės pagalbos žr. kartu su pirkiniu pateiktus dokumentus arba apsilankykite oficialioje „Fanvil“ svetainėje. website. Contact their customer service for assistance with product issues, repairs, or further inquiries.