Retekess TD157 Vibrating Pager System Instruction Manual

1. Įvadas

Thank you for choosing the Retekess TD157 Vibrating Pager System. This wireless paging system is designed to enhance customer service and operational efficiency in various settings such as restaurants, food trucks, cafes, and bars. It provides a reliable method for notifying customers when their order is ready or when they are needed.

2. Saugos informacija

• Laikykite prietaisą atokiau nuo vandens ir didelės drėgmės aplinkoje.
• Neardykite ir nebandykite taisyti įrenginio patys. Kreipkitės į kvalifikuotus techninės priežiūros darbuotojus.
• Kad išvengtumėte pažeidimų, naudokite tik pridedamą maitinimo adapterį.
• Saugokite, kad prietaisas nepatektų į ekstremalias temperatūras ar tiesioginius saulės spindulius.
• Laikyti vaikams nepasiekiamoje vietoje.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Transmitter Keyboard x 1
• Pagers x 10
• Maitinimo adapteris x 1
• Naudojimo instrukcija x 1

4. Produktas baigtasview

The Retekess TD157 system consists of a main transmitter unit and multiple guest pagers. The transmitter is used to call individual pagers, which then alert the customer through vibration, flashing lights, or a beep.

4.1 Pagrindinės savybės

• Enhanced Alert Modes: Choose between Flash + Vibration, Flash + Vibration + Buzzer, or other combinations to suit your environment.
• Ilgas veikimo diapazonas: Up to 400m (984ft) in open, line-of-sight conditions, with stable signal penetration through walls.
• Didelės talpos baterija: 200mAh Li-Ion battery in each pager provides over 15 hours of standby time. Pagers automatically charge when placed in the main unit.
• Customizable Advertising Area: Pagers feature an area for promotional stickers.
• Adjustable Reminder Duration: Set the alert duration from 1 to 99 seconds.
• Išplečiama sistema: Supports up to 997 pagers.

5. Sąranka

5.1 Pradinis įkrovimas

Before first use, place all pagers into the charging slots on the transmitter keyboard. Ensure the power adapter is connected to the transmitter and a power outlet. The pagers will begin charging automatically. A full charge takes approximately 7 hours.

5.2 Pager Pairing

Pagers are typically pre-paired. If you need to pair new pagers or re-pair existing ones:

1. Remove the shell plate from the pager to access the internal buttons.
2. Press the upper corner button and the front button simultaneously until the pager enters pairing mode (lights will flash).
3. On the transmitter keyboard, enter the desired pager number (e.g., "01") and press the "CALL" button.
4. The pager will beep, flash, and vibrate to confirm successful pairing.
5. Replace the shell plate.

5.3 Setting Alert Modes (F2 Pager's Prompt modes)

The system offers various alert modes for pagers. To change the mode:

1. Long press the "Set" button (gear icon) on the transmitter until "F1" appears.
2. Use the UP/DOWN arrows to navigate to "F2".
3. Press "CALL".
4. Enter the corresponding code for the desired mode:
   • 004: Beep
   • 005: Vibrate
   • 006: blykstė
   • 007: Beep + Vibrate
   • 008: Vibrate + Flash
   • 009: Beep + Flash
   • 010: Beep + Flash + Vibrate
5. Place the pager you wish to configure into a charging slot. The pager will update to the selected mode.

5.4 Setting Call Time (F3 Prompt Time)

To adjust how long the pager alerts:

1. Long press the "Set" button (gear icon) on the transmitter until "F1" appears.
2. Use the UP/DOWN arrows to navigate to "F3".
3. Press "CALL".
4. Enter the desired duration in seconds (1-999) and press "CALL" to save.

5.5 How to Mute the Pagers (Turn off Beep)

If you wish to disable the beep function on a pager, allowing only vibration or flash:

1. Remove the shell plate from the pager.
2. Continuously press the middle button on the pager until all five indicator lights turn off.
3. Then, press the side button on the pager. The pager will now be muted (no beep).
4. To re-enable the beep, repeat the process: continuously press the middle button until the side lights are on, then press the side button.

6. Naudojimo instrukcijos

6.1 Giving a Pager to a Customer

When a customer places an order or is waiting, give them a charged pager from the transmitter unit. Note the pager number for future reference.

6.2 Peidžerio iškvietimas

When an order is ready or a customer is needed:

1. On the transmitter keyboard, enter the pager number (e.g., "01").
2. Press the "CALL" button. The corresponding pager will activate its set alert mode (vibrate, flash, or beep).

6.3 Returning a Pager

Once the customer returns the pager, place it back into any available charging slot on the transmitter unit. This will stop the alert and begin recharging the pager.

6.4 One-Click Group Call

To call all active pagers simultaneously, press the "0" button followed by the "CALL" button on the transmitter. All pagers will activate their alert modes.

6.5 One-Click Shutdown

To turn off all active pagers simultaneously, press the "DEL" button followed by the "CALL" button on the transmitter. All pagers will cease their alert modes and power down.

7. Priežiūra

• Valymas: Use a soft, dry cloth to clean the transmitter and pagers. Avoid abrasive cleaners or solvents.
• Akumuliatoriaus priežiūra: Ensure pagers are regularly charged to maintain battery health. Avoid leaving them fully discharged for extended periods.
• Saugykla: When not in use for a long time, store the system in a cool, dry place.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information and technical support, please refer to the contact details provided in your product packaging or visit the official Retekess websvetainę. Išsaugokite pirkimo čekį garantiniams reikalavimams.