Įvadas
This manual provides detailed instructions for the installation and use of the Irfora Brass & Rubber Stepper Motor Vibration Dampers. Šie dampers are designed to significantly reduce noise and vibration produced by NEMA 17 stepper motors, commonly found in 3D printers like the CR-10, CR-10S, CR-10 V2, Ender 3, and Ender 3 Pro. By absorbing motor vibrations, these dampers contribute to a quieter operating environment and can lead to improved print quality by minimizing artifacts caused by resonance.
Saugos informacija
- Ensure the 3D printer or device is powered off and unplugged before installation.
- Handle small components carefully to avoid loss.
- If unsure about any step, consult a qualified technician or refer to your 3D printer's specific documentation.
Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi komponentai:
- 4 x Stepper Motor Dampers (Brass & Rubber)
- 8 x M3*5mm Screws
Specifikacijos
| Komponentas | Detalė |
|---|---|
| Damper Material | Brass & Rubber |
| Damper Thickness | 6 mm |
| Sraigtinė medžiaga | Nerūdijantis plienas |
| Varžto dydis | M3 * 5mm |
| Suderinamumas | NEMA 17 Stepper Motors (e.g., CR-10, Ender 3 series) |
Detailed dimensions of the Irfora NEMA 17 stepper motor vibration damper, including overall width, height, and screw hole spacing, along with the M3x5mm screw dimensions.
Diegimo vadovas
Follow these steps to install the vibration dampers on your NEMA 17 stepper motors.
- Paruoškite variklį: Ensure your 3D printer or device is turned off and unplugged. Locate the NEMA 17 stepper motor you wish to equip with a damper.
This image shows two Irfora stepper motor vibration dampers, highlighting their brass plates and central rubber ring.
- Remove Existing Motor: Carefully detach the stepper motor from its mounting bracket on your 3D printer. This usually involves unscrewing it from the frame. Keep track of any existing screws.
- Position the Damper: Place one Irfora vibration damper between the stepper motor and the mounting bracket. The damper should sit flush against the motor's mounting face.
This image illustrates an Irfora vibration damper correctly positioned on the front face of a NEMA 17 stepper motor, ready for mounting.
- Variklio tvirtinimas: Align the screw holes of the motor, damper, and mounting bracket. Use the provided M3*5mm screws to secure the motor with the damper in place. Do not overtighten the screws.
- Repeat for Other Motors: If you have multiple stepper motors you wish to dampen, repeat steps 1-4 for each motor.
Iš arti view of two Irfora stepper motor vibration dampers, showing the layered construction of brass and rubber.
Operacija
Once installed, the Irfora vibration dampers operate passively. They absorb mechanical vibrations generated by the stepper motor during its operation, reducing noise and preventing these vibrations from transferring to the printer frame. This results in a quieter printing experience and can lead to improved print quality by minimizing artifacts caused by resonance.
Priežiūra
- Periodically inspect the dampers for any signs of wear or damage.
- Ensure the mounting screws remain snug. Do not overtighten.
- Laikykite dampers free from dust and debris. A soft, dry cloth can be used for cleaning.
Trikčių šalinimas
Persistent Noise/Vibration
- Patikrinkite diegimą: Įsitikinkite, kad dampers are correctly installed between the motor and the mounting bracket, and that all screws are tightened appropriately (not overtightened).
- Inspect Dampers: Verify that the rubber ring within the damper is intact and not damaged.
- Variklio problemos: If vibration persists, the issue might be with the stepper motor itself or other components of the 3D printer. Consult your 3D printer's manual for further diagnostics.
Laisvas montavimas
- Iš naujo priveržkite varžtus: Gently retighten the M3 screws. Avoid excessive force.
- Verify Screw Length: Ensure the M3*5mm screws are appropriate for your specific motor and mounting bracket combination. Longer screws might be needed if the original screws were very short and the damper adds thickness.
Garantija ir palaikymas
For warranty information or technical support regarding your Irfora Stepper Motor Vibration Dampers, please refer to the retailer's return policy or contact Irfora customer service through the platform where the product was purchased. Keep your purchase receipt for warranty claims.
