KKnoon Wireless Ultrasonic Water Level Monitor

Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your KKnoon Wireless Ultrasonic Water Level Monitor. This device is designed to accurately measure and display water levels and temperatures in tanks, offering convenient monitoring and alarm functions.

Image: The KKnoon Wireless Ultrasonic Water Level Monitor, showing the receiver display unit and the solar-powered transmitter unit.

Savybės

• Išsamus stebėjimas: Tracks minimum and maximum liquid levels, with support for high/low level and empty tank alarms to prevent overflows and ensure efficient water management.
• Temperatūros rodymas: Measures both indoor ambient temperature and water tank temperature, providing critical data for system performance.
• Saulės įkrovimas: The transmitter features a solar panel for power assistance and charging of rechargeable NiMH batteries, reducing the need for frequent battery replacement.
• Universalus montavimas: The receiver can be placed on a desk or mounted on a wall, offering flexible placement options.
• Ultrasonic Level Gauge: Utilizes ultrasonic technology for accurate, non-contact liquid level measurement in various containers.
• Belaidis perdavimas: Operates on 433MHz wireless frequency with an open distance range of 100 meters and an effective distance of 30 meters.
• IP65 vandeniui atsparus siųstuvas: The transmitter unit is rated IP65 for water and dust resistance, suitable for outdoor installation.

Vaizdas: Viršview of the ultrasonic level meter's features, including solar charging, water level monitoring, low water level alarm, tank temperature, indoor temperature, and time alarm.

Image: Detailed explanation of solar charging (transmitter uses rechargeable nickel-metal hydride batteries) and water level monitoring (dynamic bar display and low water level alert).

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai:

• 1 x imtuvas
• 1 x siųstuvas
• 2 x Installation Screws
• 1 x USB to Type-C Wire
• 1 x Naudotojo vadovas (anglų kalba)

Specifikacijos

Image: The receiver display unit, highlighting indoor temperature, time alarm, water level, backlight, and high/low water level alarm features, along with temperature measurement ranges.

Vaizdas: pvzamples of how indoor temperature is displayed in Celsius and Fahrenheit, and tank depth is shown numerically in meters and feet on the receiver.

Sąrankos instrukcijos

Follow these steps to set up your water level monitor:

1. Receiver Power-On and Initial Settings:
   1. Power the receiver unit using either the provided USB to Type-C cable or by inserting 3 AAA batteries (not included).
   2. The receiver will enter tank depth setting mode. The setting range is 0.5m to 5m (1.64ft to 16.4ft). Adjust as needed.
2. Set Air Gap Value:
   1. Press the "SET" button on the receiver to configure the air gap value. The default display is "0.50".
   2. The setting range for the air gap is 0.5m to 5m (1.64ft to 16.4ft). Adjust this value to match the distance from the top of your tank to the maximum water level.
3. Set Automatic Water Filling Level (Optional):
   1. Press the "SET" button again to set the value for automatic water filling level.
   2. The setting range is 10% to 50%. This feature can be used to trigger an alert or action when the water level drops below a certain percentage.
4. Transmitter Power-On and Installation:
   1. Ensure the transmitter unit has 6 AAA 1.2V NiMH 900mAh rechargeable batteries installed (included).
   2. Install the transmitter on top of your water tank. For optimal solar charging, position the solar panel on the sunny side of the tank.
   3. Ensure the transmitter is installed correctly, with the ultrasonic sensor facing downwards into the tank and clear of obstructions. Avoid faulty installations where the sensor is submerged or obstructed.

Image: Step One of the setup procedure, showing how to power the receiver and enter the tank depth setting mode.

Image: Steps Two and Three for setting the air gap and automatic water filling level on the receiver. Step Four illustrates correct and faulty transmitter installation methods on a tank, emphasizing solar panel orientation and sensor placement.

Image: Details of the transmitter, including its 433MHz wireless transmission, solar charging panel, surveyor's level, IP65 waterproof rating, and a reminder to install the solar panel on the sunny side.

Naudojimo instrukcijos

Once set up, the monitor will continuously display the water level and temperature. Here are key operational aspects:

• Vandens lygio ekranas: The receiver shows the current water level numerically and with a dynamic bar graph.
• Temperatūros rodymas: Both indoor ambient temperature and water tank temperature are displayed.
• High/Low Level Alarms: The device will sound an alarm for 120 seconds if the water level reaches predefined high or low thresholds, or if the tank is empty.
• Laiko signalas: A configurable time alarm function is available.
• Foninis apšvietimas: The receiver display includes a backlight for improved visibility in low light conditions.

Image: A visual representation of water level depth measurement and the high/low water level alarm indicators on the receiver, alongside a cross-section of a tank showing the sensor's operation.

Priežiūra

• Akumuliatoriaus valdymas: The transmitter's NiMH batteries are charged by the solar panel. Ensure the solar panel is clean and exposed to sunlight for optimal charging. Replace batteries if they no longer hold a charge.
• Valymas: Periodically clean the solar panel on the transmitter and the display screen of the receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Siųstuvo išdėstymas: Regularly check the transmitter's mounting to ensure it remains secure and correctly positioned over the tank.
• Aplinkos sąlygos: While the transmitter is IP65 waterproof, avoid prolonged exposure to extreme weather conditions if possible to extend product lifespan.

Trikčių šalinimas

Jei kyla problemų dėl įrenginio, žr. toliau pateiktas dažniausiai pasitaikančias problemas ir sprendimus:

Garantija ir palaikymas

Specific warranty information is not provided in this manual. For warranty claims, technical support, or further assistance, please refer to the product packaging or contact KKnoon customer service directly through their official channels or the retailer where the product was purchased.