KAIWEETS HT206D Digital Clamp Matuoklio ir 0.8 V–100 V nuolatinės srovės išmaniosios automobilių bandymo lemputės naudotojo vadovas

1. Įvadas

This manual provides detailed instructions for the KAIWEETS HT206D Digital Clamp Meter and the KAIWEETS 0.8V-100V DC Smart Automotive Test Light. These instruments are designed for accurate electrical measurements and automotive circuit testing, suitable for professional and household use. Please read this manual thoroughly before operation to ensure safe and correct usage.

Image 1.1: KAIWEETS HT206D Digital Clamp Meter and KAIWEETS 0.8V-100V DC Smart Automotive Test Light.

This image displays both the KAIWEETS HT206D Digital Clamp Meter (left) and the KAIWEETS 0.8V-100V DC Smart Automotive Test Light (right). The clamp meter is red and black with a digital display and rotary dial. The test light is black with a digital display, probe, and alligator clip.

2. Saugos informacija

Always adhere to basic safety precautions when using electrical testing equipment to reduce the risk of fire, electric shock, or personal injury. Keep this manual for future reference.

• Neviršykite kiekvienai funkcijai nurodytų didžiausių įvesties verčių.
• Būkite ypač atsargūs dirbdami su ttagesant didesnei nei 30 V AC RMS, 42 V pikinei vertei arba 60 V DC įtampai. Šie įtampų lygiaitagtai kelia šoko pavojų.
• Before measuring current, ensure the instrument is properly set up and the test leads are correctly connected.
• Prieš keisdami funkcijas ar diapazonus, visada atjunkite bandymo laidus nuo grandinės.
• Inspect the test leads for damaged insulation or exposed metal before use. Replace if damaged.
• Do not operate the instrument if it appears damaged or if it is not functioning properly.
• Prieš naudodami įsitikinkite, kad akumuliatoriaus dangtelis yra sandariai uždarytas.
• Use caution when working in wet environments.
• For current measurement with the clamp meter, clamp around only one wire, not the entire power cord, to obtain an accurate reading.

3. Gaminio komponentai

3.1 KAIWEETS HT206D Digital Clamp Metras

Image 3.1: KAIWEETS HT206D Digital Clamp Matuoklis ir pridedami priedai.

This image shows the KAIWEETS HT206D Digital Clamp Meter along with its accessories: two 1.5V AA batteries, red and black test leads, a K-type thermocouple, and a carrying case.

KAIWEETS HT206D Digital Clamp Meter includes:

• Skaitmeninis Clamp Skaitiklio vienetas
• Bandymo laidai (raudoni ir juodi)
• K tipo termopora
• Dėklas nešiojimui
• Vartotojo vadovas (šis dokumentas)
• Batteries (typically 2x AA or AAA, check packaging for exact type)

3.2 KAIWEETS 0.8V-100V DC Smart Automotive Test Light

The KAIWEETS 0.8V-100V DC Smart Automotive Test Light includes:

• Smart Automotive Test Light unit with coiled cable and alligator clip
• Vartotojo vadovas (šis dokumentas)

4. Sąranka

4.1 KAIWEETS HT206D Digital Clamp Meter Battery Installation

1. Raskite baterijų skyrių, esantį įrenginio gale.amp metras.
2. Atsuktuvu atidarykite akumuliatoriaus dangtelį.
3. Insert the specified batteries (e.g., 2x AA 1.5V) according to the polarity markings inside the compartment.
4. Uždėkite akumuliatoriaus dangtelį ir pritvirtinkite varžtu.

4.2 KAIWEETS 0.8V-100V DC Smart Automotive Test Light

This device is typically powered by the circuit it is testing. No separate battery installation is required for the test light itself.

1. Connect the alligator clip to a suitable ground point (e.g., vehicle chassis for automotive applications).
2. Įsitikinkite, kad zondo antgalis yra švarus ir be šiukšlių.

5. Naudojimo instrukcijos

5.1 KAIWEETS HT206D Digital Clamp Metras

Turn the rotary dial to select the desired measurement function.

5.1.1 Kintamosios/nuolatinės srovės matavimas (Clamp)

1. Turn the rotary dial to the "600A" or "60A" AC/DC current range.
2. Atidarykite klamp jaws and enclose a single conductor. Ensure the conductor is centered within the jaws.
3. Nuskaitykite dabartinę vertę ekrane.
4. Svarbu: To measure current, the clamp must enclose only one conductor. Clamping around an entire power cord (which contains both live and neutral wires) will result in a zero reading.

Image 5.1.1: KAIWEETS HT206D Digital Clamp Meter measuring current.

This image shows the KAIWEETS HT206D Digital Clamp Meter in use, clamping around a single electrical wire to measure current. The display shows a reading of "270.1 AC".

5.1.2 AC/DC ttage, Resistance, Capacitance, Frequency, Diode, Continuity, Temperature Measurement

1. Connect the red test lead to the "VΩHz" input jack and the black test lead to the "COM" input jack.
2. Turn the rotary dial to the desired function (e.g., V~ for AC Voltage, V – nuolatinės srovės įtampaitage, Ω varžai ir kt.).
3. For temperature measurement, connect the K-type thermocouple to the appropriate input jacks (usually marked with temperature symbols) and select the temperature function.
4. Apply the test leads or thermocouple to the circuit or component under test.
5. Perskaitykite matavimą ekrane.

Image 5.1.2: KAIWEETS HT206D Digital Clamp Meter performing temperature measurement.

This image illustrates the KAIWEETS HT206D Digital Clamp Meter measuring temperature using the included K-type thermocouple. Examples show measurements in liquid, gas, and solid states, with a temperature range of -4°F to 1832°F.

5.1.3 NCV (bekontaktis tūrinistage) aptikimas

1. Press the NCV button (located on the right side of the meter).
2. Perkelkite cl viršųamp meter near a live conductor.
3. Matuoklis rodys kintamosios srovės įtampos buvimątage per garsinį pyptelėjimą ir (arba) vaizdinį indikatorių.

Image 5.1.3: KAIWEETS HT206D Digital Clamp Meter NCV and HOLD functions.

This image demonstrates two functions of the clamp meter. On the left, the NCV (Non-Contact Voltage) function is shown detecting voltage near an outlet. On the right, the HOLD function is activated by a short press of the 'H' button, freezing the display reading.

5.1.4 LowZ & LPF Functions

• LowZ (Low Input Impedance): Helps prevent false readings caused by "ghost voltages" in circuits. Select this mode when ghost voltages are suspected.
• LPF (žemų dažnių filtras): Used for accurate measurement of variable frequency drive (VFD) signals, common in motor and transformer applications.

5.1.5 Data Hold (MAX/MIN)

• Press the "HOLD" button to freeze the current display reading. Press again to release.
• Norėdami įrašyti maksimalias arba minimalias vertes matavimo seanso metu, paspauskite mygtuką „MAX/MIN“.

5.2 KAIWEETS 0.8V-100V DC Smart Automotive Test Light

5.2.1 Smart Mode Operation

The test light defaults to Smart Mode, automatically detecting and measuring DC voltage, continuity, and resistance without manual range selection.

1. Ensure the alligator clip is securely connected to a ground point.
2. Touch the probe tip to the circuit or component to be tested.
3. The display will automatically show the detected measurement type (DC Voltage, Continuity, or Resistance) and its value.

Image 5.2.1: KAIWEETS 0.8V-100V DC Smart Automotive Test Light in Smart Mode.

This image highlights the "Smart Mode" feature of the automotive test light, which automatically recognizes and measures DC Voltage, Resistance, and Continuity. The test light is shown in an automotive fuse box, demonstrating its application.

5.2.2 Wide Testing Range (0.8V-100V DC)

The test light can accurately measure DC voltages from 0.8V to 100V. If the voltage exceeds 100V, the display will show "OL" (Overload) as a warning.

Image 5.2.2: KAIWEETS 0.8V-100V DC Smart Automotive Test Light wide testing range.

This image demonstrates the test light's 0.8V-100V wide testing range, showing it connected to a car battery terminal. The display shows a voltage reading, and an inset illustrates the "OL" (Over-range warning) display for values exceeding 100V.

5.2.3 Žibintuvėlis ir foninis apšvietimas

• Press the flashlight button to activate the built-in flashlight for illuminating the work area.
• The green backlight display enhances readability in low-light conditions.

Image 5.2.3: KAIWEETS 0.8V-100V DC Smart Automotive Test Light with flashlight and backlight.

This image shows the automotive test light being used in a dark environment, highlighting its green backlight display and bright flashlight feature, which aids visibility during operation.

5.2.4 Buzzer Alarm for Continuity

When testing for continuity (typically less than 50Ω), the test light will emit an audible buzzer alarm to indicate a continuous circuit.

Image 5.2.4: KAIWEETS 0.8V-100V DC Smart Automotive Test Light buzzer alarm.

This image illustrates the buzzer alarm feature of the test light, which activates when testing for continuity (less than 50Ω). The test light is shown connected to a circuit, with visual cues indicating the sound waves from the buzzer.

6. Priežiūra

• Valymas: Nuvalykite priemonę su reklamaamp audiniu ir švelniu plovikliu. Nenaudokite abrazyvinių ar tirpiklių.
• Battery Replacement (HT206D Clamp Meter): Kai ekrane pasirodo išsikrovusio baterijų indikatorius, pakeiskite baterijas, kaip aprašyta 4.1 skyriuje.
• Saugykla: Store the instruments in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove batteries from the clamp metras.
• Zondo ir laidų apžiūra: Regularly inspect test leads and probes for any signs of damage, such as cuts, cracks, or exposed wiring. Replace damaged components immediately.

7. Problemų sprendimas

8. Specifikacijos

8.1 KAIWEETS HT206D Digital Clamp Metras

• Matavimo funkcijos: AC/DC srovė, AC/DC įtampatage, Resistance, Capacitance, Frequency/Duty Cycle, Diode, Continuity, Temperature
• Ypatingos savybės: True-RMS, LowZ, LPF, NCV Detection, Data Hold (MAX/MIN)
• Saugos įvertinimas: CAT III 600V (refer to device for exact rating)
• Maitinimo šaltinis: Battery Powered (e.g., 2x AA 1.5V)

8.2 KAIWEETS 0.8V-100V DC Smart Automotive Test Light

• Matavimo funkcijos: DC ttage, Continuity, Resistance (Smart Mode auto-detection)
• Testavimo diapazonas: 0.8 V–100 V nuolatinė srovė
• Ypatingos savybės: Smart Mode, Flashlight, Green Backlight Display, Buzzer Alarm
• Min. Veiklos ttage: 0.8 volto (DC)
• Saugos įvertinimas: 300V CAT III (refer to device for exact rating)

9. Garantija ir palaikymas

KAIWEETS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official KAIWEETS websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

KAIWEETS Official Websvetainė: www.kaiweets.com