Maxxima MSL-905005

Maxxima 9-inch Hardwired LED Under Cabinet Light (Model MSL-905005)

Instrukcijų vadovas

Įvadas

Thank you for choosing the Maxxima 9-inch Hardwired LED Under Cabinet Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Svarbi saugos informacija

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.

Pakuotės turinys

Produkto savybės

The Maxxima 9-inch LED Under Cabinet Light offers versatile illumination with advanced features:

Close-up of the Maxxima under cabinet light showing the On/Off rocker switch and the 5 CCT slide switch.

Vaizdas: Stambus planas view of the fixture's On/Off switch and the 5 CCT color temperature selection switch.

Graphic illustrating the five selectable color temperatures: 2700K, 3000K, 3500K, 4000K, and 5000K.

Image: Visual representation of the five color temperature options available on the fixture.

Montavimo instrukcijos

1. Paruošimas

  1. Išjunkite maitinimą: Locate the circuit breaker or fuse box and turn off the power to the area where you will be installing the light fixture. Verify power is off using a voltage testeris.
  2. Surinkite įrankius: You will need a screwdriver, wire strippers, a drill, and possibly a pencil for marking.

2. Įrenginio montavimas

  1. Position the fixture under the cabinet in the desired location. Mark the two mounting screw locations (4" apart) on the mounting surface.
  2. Jei reikia, išgręžkite bandomąsias skylutes.
  3. Secure the fixture to the mounting surface using the provided screws. Ensure the fixture is firmly attached.
Apatinė dalis view of the Maxxima under cabinet light showing the mounting holes and screw locations.

Image: Underside of the fixture, highlighting the mounting points for installation.

3. Laidų jungtys

  1. Open the wiring compartment cover on the fixture.
  2. Carefully strip approximately 3/8 inch of insulation from the ends of the house supply wires (black, white, and ground).
  3. Prijunkite šviestuvo juodą laidą prie namo juodo (karšto) laido, naudodami vielinę veržlę.
  4. Prijunkite šviestuvo baltą laidą prie namo balto (neutralaus) laido, naudodami vielinę veržlę.
  5. Connect the fixture's green (ground) wire to the house's bare copper or green (ground) wire using a wire nut.
  6. Įsitikinkite, kad visos vielos veržlės yra tvirtai priveržtos ir nėra atvirų laidų.
  7. Carefully tuck all wires into the wiring compartment and close the cover.
Image showing the wiring compartment of the Maxxima under cabinet light, both closed and open with wires visible.

Image: The wiring compartment of the fixture, illustrating how wires are connected and secured.

4. Paskutiniai žingsniai

  1. Once wiring is complete and the compartment cover is closed, restore power at the circuit breaker or fuse box.
  2. Test the light fixture using the On/Off switch.

Naudojimo instrukcijos

1. Maitinimo įjungimas/išjungimas

Use the rocker switch located on the front of the fixture to turn the light ON or IŠJUNGTA. If the fixture is connected to a wall switch or timer, you can leave the rocker switch in the ON position and control the light from the external switch.

2. Color Temperature Selection (CCT)

The fixture features a slide switch for selecting one of five color temperatures. To change the CCT, simply slide the switch to your desired setting:

Maxxima under cabinet light emitting a warm white light, installed under a kitchen cabinet.

Image: The under cabinet light illuminated with a warm white color temperature (e.g., 2700K or 3000K).

Maxxima under cabinet light emitting a neutral white light, installed under a kitchen cabinet.

Image: The under cabinet light illuminated with a neutral white color temperature (e.g., 4000K or 5000K).

Priežiūra

To maintain the appearance and performance of your Maxxima LED Under Cabinet Light:

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Šviesa neįsijungia.Armatūrai nėra energijos.Check circuit breaker/fuse. Ensure wall switch (if any) is ON. Verify all wiring connections are secure.
Šviesa mirga arba yra pritemdyta.Atsipalaidavusi laidų jungtis.Disconnect power and re-check all wiring connections.
Neteisinga spalvų temperatūra.CCT slide switch set incorrectly.Adjust the CCT slide switch to the desired setting.

Specifikacijos

AtributasVertė
Modelio numerisMSL-905005
Dydis9 colių
Vattage4.5 vatų
Ryškumas270 liumenų
Spalvų temperatūra (CCT)2700K, 3000K, 3500K, 4000K, 5000K pasirenkama
ttage120 voltai (kintamoji srovė)
Gaminio matmenys9 colio ilgio x 3.58 colių pločio x 1.45 colio aukščio
Prekės svoris1 svaras
MedžiagaPlastikiniai
Šviesos šaltinio tipasLED
Visą gyvenimą50,000 valandos
SertifikataiETL įtrauktas į sąrašą
Garantija3 metai

Garantija ir palaikymas

This Maxxima LED Under Cabinet Light is covered by a 3 metų garantija nuo pirkimo datos. Ši garantija apima medžiagų ir gamybos defektus normaliai naudojant.

For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima websvetainė, kurioje pateikiama naujausia kontaktinė informacija.

Susiję dokumentai - MSL-905005

Preview „Maxxima“ lubinių šviestuvų montavimo vadovas MCL-3142300B/MCL-3142300SN
Išsamus „Maxxima“ lubinio šviestuvo, modelio numeriai MCL-3142300B ir MCL-3142300SN, montavimo vadovas. Šiame vadove pateikiamos nuoseklios šviestuvo laidų prijungimo ir montavimo instrukcijos, taip pat svarbūs saugos įspėjimai ir atsargumo priemonės. Jame taip pat išsamiai aprašoma „Maxxima“ teikiama 3 metų ribota garantija.
Preview „Maxxima“ spintelės apšvietimo montavimo instrukcijos
Žingsnis po žingsnio „Maxxima“ spintelių šviestuvų montavimo vadovas, įskaitant saugos įspėjimus, atsargumo priemones ir informaciją apie garantiją.
Preview „Maxxima“ jungiamųjų po spintele montuojamų šviestuvų montavimo vadovas (MSL-12700WL, MSL-18100WL, MSL-24140WL)
Išsamus „Maxxima“ jungiamųjų po spintelėmis montuojamų šviestuvų, įskaitant modelius MSL-12700WL, MSL-18100WL ir MSL-24140WL, montavimo vadovas. Sužinokite, kaip saugiai sumontuoti ir sujungti po spintelėmis montuojamus šviestuvus.
Preview „Maxxima MCL-715705“ lubų šviestuvo montavimo vadovas ir garantija
Išsamios „Maxxima MCL-715705“ LED apvalaus lubinio šviestuvo montavimo instrukcijos ir garantijos informacija. Apima montavimą jungiamojoje dėžutėje ir montavimą po montavimo, pateikiant saugos įspėjimus ir atsargumo priemones.
Preview Maxxima Undercabinet Light Installation Guide (MSL-12700W, MSL-18100W, MSL-24140W)
Comprehensive installation guide for Maxxima MSL-12700W, MSL-18100W, and MSL-24140W undercabinet LED lights. Includes step-by-step instructions, required tools, important warnings, warranty information, and a list of included parts.
Preview „Maxxima MRL-S20803S/SB“ 2 colių kvadratinio, neatspindinčio LED šviestuvo montavimo vadovas
„Maxxima MRL-S20803S“ ir „MRL-S20803SB“ 2 colių kvadratinių, apsaugančių nuo akinimo, LED šviestuvų montavimo vadovas. Savybės: bekontaktis IC reitingas, 450 liumenų ir 3 CCT parinktys (2700K–4000K). Apima saugos įspėjimus, dalių sąrašą ir nuoseklias montavimo procedūras.