TURBRO Greenland-12K115

TURBRO Greenland 12 000 BTU bekanalė mini split inverterinė oro kondicionavimo sistema su šilumos siurbliu, naudotojo vadovas

Model: Greenland-12K115

1. Įvadas

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TURBRO Greenland 12,000 BTU Ductless Mini Split Inverter AC with Heat Pump. Please read this manual thoroughly before installation and use, and retain it for future reference.

Pagrindinės funkcijos:

2. Kas yra dėžutėje

Your TURBRO Greenland Mini Split system is typically delivered in two separate boxes. Please verify all packages upon delivery to ensure all components are received before scheduling installation or beginning the installation process.

TURBRO Greenland Mini Split Indoor and Outdoor Units with Remote and App Interface

Figure 1: TURBRO Greenland Mini Split system components.

Box One (Indoor Unit & Accessories):

Box Two (Outdoor Unit & Installation Kit):

3. Sąranka ir diegimas

The TURBRO Greenland Mini Split AC is designed for easy installation with a step-by-step guide and numbered wiring diagram. However, professional installation is recommended to ensure optimal performance and safety.

Video 1: TURBRO Greenland Ductless Mini Split AC Installation Guide. This video provides a visual walkthrough of the installation process.

3.1 Vidinio įrenginio montavimas

  1. Mounting Plate Placement: Use the provided cardboard template to mark the position for the indoor unit's mounting plate on the wall. Ensure adequate clearance: approximately 8 inches from the ceiling and 14 inches from adjacent walls. Use a level to ensure proper alignment.
  2. Skylių gręžimas: Drill pilot holes for the mounting plate screws. For brick or concrete walls, use appropriate masonry drill bits and anchors. For drywall, locate studs or use heavy-duty drywall anchors rated for the unit's weight.
  3. Tvirta tvirtinimo plokštė: Attach the mounting plate securely to the wall using the appropriate screws.
  4. Drill Conduit Hole: Drill a large hole (typically 2.5-3 inches in diameter) through the wall for the refrigerant lines, drain hose, and electrical cables. Ensure this hole is angled slightly downwards towards the exterior to facilitate drainage.
  5. Electrical Wiring (Indoor Unit): Open the front panel of the indoor unit. Locate the electrical terminal block. Connect the power wires from the outdoor unit to the corresponding terminals (L, N, 1, 2, 3, Ground) as indicated in the wiring diagram. Secure the wires with the cable clamp.
  6. Wrap Lines: Bundle the refrigerant lines, electrical cable, and drain hose together using insulation tape. This protects them and facilitates passage through the wall.
  7. Vidinio bloko montavimas: Carefully feed the bundled lines through the wall hole. Lift the indoor unit and hook it onto the top of the mounting plate, then gently push the bottom until it snaps into place. Ensure the unit is level and securely attached.

3.2 Lauko įrenginio išdėstymas

  1. Svetainės pasirinkimas: Choose a suitable, level location for the outdoor unit. Ensure at least 12 inches of clearance from the back of the unit to any wall and 20 inches on either side for proper airflow and maintenance.
  2. Įdiekite gumines kojeles: Attach the provided rubber feet to the base of the outdoor unit. These help reduce vibration and noise.
  3. Electrical Wiring (Outdoor Unit): Open the wiring cover on the outdoor unit. Connect the electrical wires from the indoor unit and the main power supply to the corresponding terminals (L, N, 1, 2, 3, Ground) as per the wiring diagram. Use liquid-tight conduit for the main power supply for safety and weather protection.
  4. Prijunkite šaltnešio linijas: Carefully bend the pre-charged refrigerant lines from the indoor unit to align with the outdoor unit's service ports. Remove protective caps and hand-tighten the flare nuts. Use two wrenches to tighten them to the specified torque.
  5. Prijunkite išleidimo žarną: Connect the outdoor unit's drain hose to the designated port.

3.3 Sistemos paleidimas

  1. Vacuum the System: Connect a vacuum pump and gauge set to the low-pressure service port. Run the vacuum pump for at least 15 minutes to remove air and moisture from the refrigerant lines. Close the low-pressure port and monitor the gauge for at least 15 minutes to ensure no leaks are present (the reading should remain at -0.1 MPa).
  2. Išleidžiamas šaltnešis: If the system holds a vacuum, release a small amount of refrigerant into the lines for a leak check. Open the low-pressure valve for 5 seconds, then close it. Apply soapy water to all connections; if bubbles appear, there is a leak that needs to be addressed.
  3. Fully Open Valves: If no leaks are detected, fully open both the low and high-pressure valves to release the refrigerant into the system. Replace all protective caps.
  4. Maitinimas: Turn on the dedicated 20-amp circuit breaker in your electrical panel. Your AC unit is now ready for operation.

4. Naudojimo instrukcijos

Your TURBRO Greenland Mini Split offers various operating modes and convenient control options.

4.1 Valdymo parinktys

4.2 Darbo režimai

5. Priežiūra

Reguliarus techninis aptarnavimas užtikrina optimalų įrenginio veikimą ir ilgaamžiškumą.

5.1 Filtro valymas

The indoor unit's air filters are easily accessible for cleaning:

  1. Švelniai atidarykite vidinio bloko priekinį skydelį.
  2. Nuimkite oro filtrus.
  3. Clean the filters using a vacuum cleaner or by washing them with lukewarm water.
  4. Prieš vėl įdėdami filtrus, leiskite jiems visiškai išdžiūti.
  5. Saugiai uždarykite priekinį skydelį.

6. Problemų sprendimas

If you encounter issues with your unit, refer to the following common troubleshooting steps. For persistent problems, contact customer support.

7. Specifikacijos

FunkcijaDetalė
Prekės ženklasTURBRO
ModelisGreenland-12K115
Aušinimo talpa12,000 XNUMX BTU
Šildymo pajėgumas12,000 XNUMX BTU
Aprėpties sritisIki 750 kv. pėdų
SEER2 įvertinimas23
ttage115 V
Vattage920W
Triukšmo lygis (min.)27 decibelų
Šaldymo agentasR454B
Ypatingos savybėsDehumidifier, Fast Cooling, Heating & Cooling, Inverter Compressor, WiFi Enabled
Energijos sertifikavimas„Energy Star“ sertifikatas
Vidaus bloko matmenys36.2"W x 12.1"H x 7.7"D (approximate, inferred from image)
Lauko bloko matmenys28.7"W x 21.7"H x 12.0"D (approximate, inferred from image)

8. Garantija ir palaikymas

8.1 Informacija apie garantiją

The TURBRO Greenland Mini Split Inverter AC comes with a 24-month warranty. Please refer to the full warranty details in the included User Manual for terms and conditions.

8.2 Pagalba klientams

For technical assistance, troubleshooting, or warranty claims, please contact TURBRO Customer Support. Contact information can be found in your User Manual or on the official TURBRO websvetainę.

Susiję dokumentai - Greenland-12K115

Preview TURBRO padalinto oro kondicionieriaus naudotojo vadovas – įrengimo ir naudojimo vadovas
Šiame naudotojo vadove pateikiamos išsamios TURBRO padalintų oro kondicionierių, įskaitant tokius modelius kaip „Greenland-9K115“ ir „Greenland-24K230“, instrukcijos. Jame pateikiama esminė saugos informacija, įrengimo procedūros, veikimo režimai, priežiūra, trikčių šalinimas ir garantijos informacija, ypatingą dėmesį skiriant R454B šaltnešio naudojimui.
Preview TURBRO padalinto oro kondicionieriaus naudotojo vadovas: įrengimo, naudojimo ir saugos vadovas
Oficialus TURBRO split tipo oro kondicionierių naudotojo vadovas. Sužinokite apie tokių modelių kaip „Greenland“ serijos montavimą, veikimo režimus, saugos priemones, priežiūrą, trikčių šalinimą ir garantiją.
Preview Nešiojamojo oro kondicionieriaus TURBRO GLP05AC GLP06AC naudotojo vadovas
Nešiojamųjų oro kondicionierių TURBRO GLP05AC ir GLP06AC naudotojo vadovas. Jame pateikiami įrengimo, naudojimo, priežiūros ir trikčių šalinimo vadovai, skirti optimaliam veikimui.
Preview TURBRO GLS04 Greenland drėkintuvo naudotojo vadovas
Išsamus TURBRO GLS04 Greenland drėkintuvo naudotojo vadovas, kuriame pateikiama informacija apie saugą, komponentus, specifikacijas, naudojimą, priežiūrą, trikčių šalinimą ir garantiją.
Preview TURBRO GL150P oro sausintuvo naudotojo vadovas
Išsamus TURBRO GL150P sausintuvo naudotojo vadovas, kuriame pateikiamos saugos instrukcijos, dalių aprašymas, specifikacijos, veikimas, valymas, laikymas, trikčių šalinimas ir informacija apie garantiją.
Preview TURBRO Portable Air Conditioner User Manual - Greenland GLP07AC
Comprehensive user manual for the TURBRO Portable Air Conditioner, Model Greenland GLP07AC. Includes setup, operation, maintenance, troubleshooting, and warranty information.