Įvadas
This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your RYOBI 18V Brushless 8 in. Compact Pruning Mini Chainsaw, Model PSBCW01B. Please read this manual thoroughly before operating the tool and retain it for future reference.
Image: The RYOBI 18V Brushless 8 in. Compact Pruning Mini Chainsaw, Model PSBCW01B, shown without battery.
Bendra saugos informacija
ĮSPĖJIMAS: perskaitykite visus su šiuo elektriniu įrankiu pateiktus saugos įspėjimus, instrukcijas, iliustracijas ir specifikacijas. Jei nesilaikysite visų toliau išvardytų nurodymų, galite gauti elektros smūgį, gaisrą ir (arba) rimtus sužalojimus.
- Dirbdami su grandininiu pjūklu, visada dėvėkite tinkamas asmenines apsaugos priemones (AAP), įskaitant apsauginius akinius, pirštines ir klausos apsaugos priemones.
- Užtikrinkite, kad darbo zonoje nebūtų pašalinių asmenų, ypač vaikų ir naminių gyvūnėlių.
- Nenaudokite grandininio pjūklo drėgnomis sąlygomis arba šalia degių skysčių ar dujų.
- Keep a firm grip on the chainsaw with both hands during operation.
- Before performing any maintenance, adjustments, or storage, always remove the battery pack from the tool.
- Be aware of kickback. Kickback may occur when the moving chain contacts an object at the upper tip of the guide bar or when the wood closes in and pinches the saw chain in the cut.
Image: A user demonstrating safe operation of the mini chainsaw, wearing safety glasses and gloves while cutting a branch.
Sąranka ir surinkimas
1. Akumuliatoriaus įdėjimas
- Įsitikinkite, kad grandininis pjūklas yra išjungtas ir įjungtas saugos užraktas.
- Sulygiuokite akumuliatorių bloką su įrankio akumuliatoriaus prievadu.
- Įstumkite akumuliatorių bloką į įrankį, kol jis tvirtai užsifiksuos.
- Norėdami išimti, paspauskite akumuliatoriaus atlaisvinimo mygtuką ir ištraukite akumuliatorių.
Video: A user demonstrating battery installation, the safety lock mechanism, and trigger operation of the RYOBI pruning chainsaw. This video provides a practical overview of preparing the tool for use.
2. Grandinės įtempimo reguliavimas
The chain tension should be checked before each use and after the first few cuts. Proper chain tension is crucial for safe and efficient operation.
- Įsitikinkite, kad baterija išimta.
- Grandinės įtempimo rankenėlę raskite grandininio pjūklo šone.
- Use the on-board combination wrench to loosen the bar retaining nut slightly.
- Turn the tensioning knob clockwise to increase tension or counter-clockwise to decrease tension. The chain should be snug against the guide bar but still able to be pulled around by hand.
- Once the desired tension is achieved, tighten the bar retaining nut securely.
Image: An annotated diagram of the RYOBI mini chainsaw, highlighting key features including the chain guard, variable speed trigger, and the tool-tensioning mechanism for precise chain adjustments.
Naudojimo instrukcijos
1. Grandininio pjūklo užvedimas
- Įsitikinkite, kad akumuliatorius yra visiškai įkrautas ir tinkamai įdėtas.
- Tvirtai suimkite grandininį pjūklą abiem rankomis.
- Press and hold the safety lock button (typically located near the trigger).
- Squeeze the variable speed trigger to start the chain. Release the safety lock button once the chain is running.
Video: A demonstration of the RYOBI 8-inch pruning saw, including battery installation and basic handling. This video highlights the tool's compact size and ease of use for yard work.
2. Pjūvių darymas
- Always begin a cut with the chain running at full speed.
- Place the bottom of the guide bar against the branch to be cut.
- Apply light pressure and allow the saw to cut through the wood. Do not force the saw.
- For larger branches (up to 6 inches), make multiple shallow cuts if necessary to avoid pinching the bar or chain.
- Be mindful of the branch's weight and direction of fall to prevent injury or damage.
Image: The RYOBI mini chainsaw in action, cutting through a thick branch, demonstrating its 6-inch cut capacity for pruning and light limbing.
Image: The RYOBI mini chainsaw being used to cut a fallen log on the ground, showcasing its oil-free design for hassle-free cutting with less mess.
Priežiūra
1. Valymas
- Po kiekvieno naudojimo išimkite baterijų bloką.
- Use a brush or compressed air to remove sawdust, chips, and debris from the chain, guide bar, and motor housing.
- Nuvalykite įrankio išorę švaria šluoste,amp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
2. Grandinės galandimas ir keitimas
- A dull chain will reduce cutting efficiency and increase the risk of kickback. Sharpen the chain regularly or replace it when necessary.
- Refer to the chain manufacturer's instructions for proper sharpening techniques.
- When replacing the chain, ensure it is the correct size and type for your RYOBI PSBCW01B model.
3. Sandėliavimas
- Grandininį pjūklą laikykite sausoje, saugioje, vaikams nepasiekiamoje vietoje.
- Prieš ilgesnį laiką laikydami įrankį, visada išimkite akumuliatorių.
- Use the provided bar cover to protect the chain and guide bar during storage.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Grandininis pjūklas neužsiveda | Battery not installed correctly or discharged; Safety lock not engaged; Trigger not fully depressed. | Ensure battery is fully charged and properly seated. Press and hold safety lock, then fully depress trigger. |
| Chain comes off easily | Chain tension too loose; Worn chain or guide bar. | Adjust chain tension as per "Chain Tension Adjustment" section. Inspect chain and guide bar for wear and replace if necessary. |
| Prastas pjovimo našumas | Dull chain; Incorrect chain tension; Debris in chain or guide bar. | Sharpen or replace chain. Adjust chain tension. Clean chain and guide bar thoroughly. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | RYOBI |
| Modelio numeris | PSBCW01B |
| Maitinimo šaltinis | Maitinamas baterijomis (18 V ONE+ sistema) |
| Baro ilgis | 8 colio (203 mm) |
| Sumažinti talpa | Iki 6 colių |
| Variklio tipas | Be šepetėlių |
| Prekės svoris | 3 Pounds (Tool Only) |
| Gaminio matmenys | 12 colio ilgio x 6 colių pločio x 6 colio aukščio |
| Alyvos sistema | Oil-free design |
Garantija ir palaikymas
RYOBI provides a manufacturer's warranty for this product. Please refer to the warranty card included with your purchase for specific terms, conditions, and registration information. For technical support, replacement parts, or service inquiries, please contact RYOBI customer service or visit their official websvetainę.
Always use genuine RYOBI replacement parts and accessories to ensure optimal performance and maintain warranty validity.
