iMaihom IM-50P-3SH

iMaihom 50W Motion Sensor Outdoor Light

Model: IM-50P-3SH

Įvadas

Thank you for choosing the iMaihom 50W Motion Sensor Outdoor Light. This hardwired LED floodlight provides 5000 lumens of 6500K daylight white light, enhancing security and visibility for your outdoor spaces. Featuring advanced motion detection and a dusk-to-dawn function, this IP65 waterproof light is designed for reliable performance in various weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Saugos informacija

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

Diagram showing the parts list for the iMaihom motion sensor outdoor light, including the light fixture, mounting bracket, screws, expansion rubber plugs, wire nuts, and gasket.

Figure 1: Included Parts List

Produkto savybės

Sąranka ir diegimas

Before installation, ensure the power supply is turned off at the circuit breaker to prevent electrical shock.

  1. Seno tvirtinimo elemento pašalinimas (jei taikoma): Carefully disconnect and remove any existing light fixture from the junction box.
  2. Įdiekite montavimo laikiklį: Pritvirtinkite pateiktą tvirtinimo laikiklį prie skirstomosios dėžutės naudodami atitinkamus varžtus. Įsitikinkite, kad jis tvirtai pritvirtintas.
  3. Prijunkite laidus: Connect the wires from the new iMaihom light to the household wiring using the included wire nuts. Match colors: black to black (hot), white to white (neutral), and green to ground (bare copper). Wrap electrical tape around wire nuts for added security.
  4. Sumontuokite šviesą: Align the light fixture with the mounting bracket and secure it with the long machine screw provided. Ensure the gasket is properly seated between the fixture and the mounting surface to prevent water intrusion.
  5. Šviestuvų galvučių reguliavimas: Loosen the Phillips screw on the main head to adjust its angle. The side LED heads can also be articulated to direct light as desired.
Diagram showing the hardwired installation steps for the iMaihom motion sensor outdoor light, illustrating connection to a junction box and the three adjustable light heads.

Figure 2: Hardwired Installation Steps

Image showing two mounting options for the iMaihom motion sensor outdoor light: wall-mounted and soffit-mounted.

Figure 3: Wall Mounted and Soffit Mounted Options

Video 1: General Installation Guide (Source: Struggleville, an independent creator)

Naudojimo instrukcijos

The iMaihom motion sensor light offers multiple operating modes and adjustable settings located on the bottom of the motion sensor unit.

Valdymo ratukai:

Veikimo režimai:

Close-up image of the three control dials on the iMaihom motion sensor, labeled for Test Mode, Time Delay, and Sensitivity.

Figure 4: Control Dials for Settings

Image illustrating the dusk to dawn function, showing the light automatically turning off during the day and on at night.

5 pav.: Veikimas režimu „Nuo sutemų iki aušros“

2 vaizdo įrašas: Viršview of iMaihom 50W Motion Sensor Outdoor Light Features

Priežiūra

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Šviesa neįsijungia.No power, incorrect wiring, or sensor settings.Check circuit breaker. Verify wiring connections. Adjust sensor settings (e.g., ensure not in TEST mode if expecting D2D).
Šviesa dega nuolat.Continuous motion detected, or D2D mode active during daylight.Check for obstructions in sensor's field of view. Adjust SENSITIVITY dial. Ensure D2D mode is set correctly for ambient light.
Judesio jutiklis per jautrus / nepakankamai jautrus.SENSITIVITY dial setting.Adjust the SENSITIVITY dial to 'L' for less sensitivity or 'H' for more sensitivity.
Šviesos mirgėjimas.Atsipalaidavusi laidų jungtis.Išjunkite maitinimą ir patikrinkite visų laidų jungčių tvirtumą.

Specifikacijos

SpecifikacijaDetalė
Prekės ženklasiMaihom
Modelio pavadinimasIM-50P-3SH
Vattage50 vatų
Ryškumas5000 liumenų
Spalvos temperatūra6500K (balta dienos šviesa)
MedžiagaAliuminis, Plastikas
Maitinimo šaltinisSu laidu elektra
ttage120 voltai (kintamoji srovė)
Naudojimas viduje / laukeLauke
Atsparumo vandeniui lygisIP65 Atsparus vandeniui
Judesio aptikimo kampas180 laipsnių
Judesio aptikimo diapazonas19–72 pėdų
Apšvietimo trukmė1–10 minutes (adjustable)
Gaminio matmenys9.48 colio ilgio x 7 colių pločio x 4.6 colio aukščio
Prekės svoris1.54 svaro

Garantija ir palaikymas

iMaihom products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official iMaihom websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.

Susiję dokumentai - IM-50P-3SH

Preview iMaihom Smart Floodlight Camera Installation Instructions
Comprehensive installation guide for the iMaihom Smart Floodlight Camera (Model: IM-55A-5CL), covering safety information, parts list, specifications, installation steps, and troubleshooting.
Preview iMaihom Smart Wireless Floodlight Camera BDBS55SX-5 Installation Guide
Comprehensive installation guide and technical specifications for the iMaihom Smart Wireless Floodlight Camera (Model: BDBS55SX-5). Learn about setup, safety precautions, wiring, Wi-Fi connection, and product features.
Preview IME IDM konfigūravimo programinės įrangos diegimo vadovas ir naudotojo vadovas
Išsamus IME IDM konfigūravimo programinės įrangos, skirtos CONTO energijos skaitikliams valdyti, diegimo ir naudojimo vadovas. Apima sistemos reikalavimus, diegimą, įrenginio konfigūravimą, programinės įrangos atnaujinimus ir ataskaitų teikimą.
Preview „Hoshizaki“ ledo gaminimo aparato naudojimo instrukcija
Išsami „Hoshizaki“ ledo generatorių naudojimo instrukcija, kurioje aprašomas įrengimas, naudojimas, priežiūra ir saugos gairės. Įtraukta informacija apie įvairius modelius.
Preview „Hoshizaki IM“ serijos ledo gaminimo aparato techninės priežiūros vadovas
Išsamus „Hoshizaki IM“ serijos autonominių ir modulinių ledo kubelių gamybos įrenginių techninės priežiūros vadovas, kuriame aptariamos įvairių modelių, įskaitant IM-21CPE–IM-240XWPE, specifikacijos, veikimas, priežiūra, trikčių šalinimas ir dalių keitimas.
Preview HOSHIZAKI autonominio/modulinio „Cuber“ techninės priežiūros vadovas
Išsamus HOSHIZAKI autonominių ir modulinių ledo kubelių gamybos aparatų techninės priežiūros vadovas, kuriame aptariamos įvairių modelių, įskaitant IM-21CPE–IM-240XWPE, specifikacijos, konstrukcija, veikimo seka, techninė informacija, priežiūra, diagnostika ir keitimo procedūros.