TATTU Plus 1.0 Compact Version 10000mAh 15C 44.4V 12S1P Lipo Smart Battery Pack User Manual

1. Įvadas

This manual provides essential instructions for the safe and effective use of your TATTU Plus 1.0 Compact Version 10000mAh 15C 44.4V 12S1P Lipo Smart Battery Pack. Please read this manual thoroughly before operating the battery to ensure proper handling, charging, discharging, and storage procedures. Adherence to these guidelines will help prevent damage to the battery and ensure user safety.

1 pav.: priekis view of the TATTU Plus 1.0 Compact Lipo Smart Battery Pack, showcasing jo dizainą ir pagrindines specifikacijas.

2. Saugos instrukcijos

Lithium Polymer (LiPo) batteries are powerful and require careful handling. Failure to follow these safety instructions can result in fire, personal injury, and property damage.

Bendrosios saugos priemonės:

• Always use a LiPo-compatible charger. Never use a NiCd/NiMH charger.
• Never charge unattended. Always monitor the battery during charging.
• Charge in a fire-safe area, away from flammable materials.
• Do not charge or discharge a damaged battery. Inspect for swelling, punctures, or leaks.
• Nejunkite akumuliatoriaus gnybtų trumpojo jungimo.
• Neardykite, nepradurkite ir nemodifikuokite akumuliatoriaus.
• Baterijas laikykite vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
• Avoid exposing the battery to extreme temperatures (above 60°C / 140°F or below 0°C / 32°F).
• If the battery swells, immediately discontinue use and place it in a fire-safe container outdoors.

Įkrovimo sauga:

• Ensure the charger settings match the battery's voltage (44.4V) and cell count (12S).
• Always use the balance port during charging to ensure all cells are equally charged.
• Neperkraukite akumuliatoriaus. Atjunkite, kai jis bus visiškai įkrautas.

Discharging Safety:

• Do not over-discharge the battery. Maintain a minimum voltage of 3.0V per cell (36V total for 12S).
• Monitor battery temperature during high-current discharge. Discontinue use if it becomes excessively hot.

3. Sąranka

3.1 Pirminė apžiūra

1. Upon receiving your TATTU battery, carefully inspect it for any signs of physical damage, such as dents, punctures, or swelling.
2. Verify that the XT90-S plug and Molex-43045-1600 balancer connector are intact and free from damage.
3. If any damage is observed, do not attempt to use or charge the battery. Contact customer support immediately.

3.2 Pirmasis įkrovimas

Before first use, fully charge the battery using a compatible LiPo balance charger.

1. Connect the XT90-S main discharge plug to your charger's output port.
2. Connect the Molex-43045-1600 balance connector to the charger's balance port.
3. Set your charger to the LiPo balance charge mode for a 12S (44.4V) battery.
4. Set the charge current to 1C (10 Amps for a 10000mAh battery) or lower for optimal battery life.
5. Initiate the charging process and monitor the battery closely. Disconnect once charging is complete.

2 pav.: šonas view of the TATTU Plus 1.0 battery, highlighting the XT90-S anti-spark connector and the robust casing.

4. Operacinis

4.1 Connecting to Device

• Ensure your device (e.g., drone) is powered off before connecting the battery.
• Connect the XT90-S plug of the battery to the corresponding XT90-S connector on your device. The XT90-S plug is designed to minimize sparks during connection.
• Secure the battery within your device to prevent movement during operation.

4.2 Iškrovimas

• Operate your device as intended. Monitor the battery voltage naudojimo metu.
• Discontinue use when the battery reaches its minimum safe voltage (3.0V per cell, 36V total for 12S). Over-discharging can permanently damage the battery.
• Allow the battery to cool down before recharging or storing after heavy discharge.

3 pav.: Kampinis view of the TATTU Plus 1.0 battery, showing the compact form factor and the TATTU Plus branding.

5. Priežiūra

5.1 Saugykla

• For long-term storage, charge or discharge the battery to a storage voltage of 3.8V-3.85V per cell (approximately 45.6V-46.2V for 12S).
• Store the battery in a cool, dry place, away from direct sunlight, heat sources, and flammable materials. A LiPo-safe bag or container is recommended.
• Avoid storing fully charged or fully discharged batteries for extended periods, as this can reduce battery life.

5.2 Valymas

• Išvalykite bateriją casing minkštu, sausu skudurėliu.
• Nenaudokite tirpiklių ar abrazyvinių valiklių.
• Ensure connectors are clean and free of debris for optimal contact.

5.3 Išmetimas

• Never dispose of LiPo batteries in regular household waste.
• Discharge the battery completely before disposal.
• Recycle LiPo batteries at designated recycling centers or through specialized battery disposal services.

4 pav.: šonas view of the TATTU Plus 1.0 battery, showing a warning label and the integrated power indicator/button panel.

6. Problemų sprendimas

This section addresses common issues you might encounter with your TATTU Lipo battery.

7. Specifikacijos

Detailed technical specifications for the TATTU Plus 1.0 Compact Version 10000mAh 15C 44.4V 12S1P Lipo Smart Battery Pack.

5 pav.: Iš ​​viršaus į apačią view of the TATTU Plus 1.0 battery, illustrating its integrated handle for easy transport and installation.

8. Garantija ir palaikymas

TATTU provides local after-sales service for this product. For any warranty claims, technical support, or service inquiries, please contact TATTU customer support. Our service center is located in Livermore, CA, ensuring prompt assistance for our customers.

Please refer to your purchase documentation or the official TATTU websvetainėje rasite konkrečias garantijos sąlygas ir kontaktinę informaciją.