Įvadas
The Gedsffati HD08-G is a direct insertion combined gas and carbon monoxide (CO) detector designed for home use. It provides real-time monitoring of gas and CO concentrations, offering audible and visual alarms to enhance safety. This manual provides essential information for the proper installation, operation, and maintenance of your detector.
Svarbi saugos informacija
- Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas.
- Šis prietaisas skirtas naudoti tik patalpose.
- Do not paint the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings of the detector.
- Reguliariai tikrinkite detektorių, kaip nurodyta šiame vadove.
- In case of an alarm, follow the emergency procedures outlined in the operating section.
- This detector is not a substitute for proper maintenance of fuel-burning appliances, including appropriate ventilation and exhaust systems.
Produktas baigtasview ir Savybės
The HD08-G detector features high-precision sensors for reliable detection of combustible gases (Natural Gas, LPG, Methane, Propane, Butane) and Carbon Monoxide. Its 2.1-inch HD color screen provides clear, real-time information.
Pagrindinės funkcijos:
- High-precision sensors for gas and CO detection.
- High-definition colorful large screen display (2.1-inch, 240*296 resolution, IPS ultra broad perspective).
- Audible and visual alarm system.
- Fault self-check function.
- Plug and play diegimas.
- Real-time monitoring of gas and CO concentration, temperature, and humidity.
Komponentai:
The device includes a main display unit with three control buttons (H, O, D) and an intelligent power indicator light.
Vaizdas: priekis view of the Gedsffati HD08-G detector highlighting its display and features like high precision sensors and audible/visual alarm.
Vaizdas: Išsprogdintas view illustrating the internal high-precision sensors and sensitive detection performance of the HD08-G detector.
Sąranka ir diegimas
The HD08-G detector is designed for simple plug-and-play installation.
- Pasirinkite tinkamą vietą:
- For gas detection: Install near gas appliances (e.g., stove, water heater) where gas leaks might occur. Combustible gases like LPG and propane are heavier than air and tend to sink, so place the detector lower. Natural gas and methane are lighter than air and rise, so place it higher.
- For CO detection: Install at breathing height, typically 1.5 meters (5 feet) from the floor. Avoid placing it directly above heat sources or in areas with high humidity.
- Ensure the detector is not obstructed by furniture, curtains, or other objects.
- Plug in the detector: Insert the detector directly into a standard electrical outlet. The device will power on automatically.
- Initial self-check: Upon powering on, the detector will perform a self-check. The intelligent power indicator light will show green if normal.
Vaizdas: pvzamples of suitable installation locations for the HD08-G detector in different environments, emphasizing its versatility for home and travel.
Naudojimo instrukcijos
Rodyti informaciją:
The 2.1-inch HD color screen displays the following information:
- CO PPM: Anglies monoksido koncentracija milijoninėmis dalimis.
- DUJOS: Combustible gas concentration, often represented by a bar graph or numerical value.
- Temperatūra: Ambient temperature (e.g., in °F or °C).
- Drėgmė: Santykinė oro drėgmė proctage.
- Būsenos piktogramos: Icons for sound, alarm, and light sensor.
Image: The detector's display showing real-time monitoring of CO and combustible gas concentrations, along with temperature and humidity.
Vaizdas: Išsamus view of the 2.1-inch HD color screen display, highlighting its clarity and technical specifications.
Savitikros funkcija:
To perform a manual self-test:
- Short press the 'O' button on the front of the detector.
- The device will initiate a self-test sequence, activating the alarm and checking sensor functionality.
- The intelligent power indicator light will show green for normal operation. A red light indicates a mute error or sensor malfunction.
Image: Illustration of the intelligent power indicator light and the self-test function, explaining the meaning of green and red light indicators.
Signalizacijos indikacijos:
When gas or CO concentration reaches dangerous levels, the detector will activate an audible and visual alarm.
- Garsinis signalas: A loud siren will sound.
- Vaizdinis signalas: The screen will display alarm messages, and the indicator light will turn red.
Image: The detector in an alarm state, demonstrating the sound and light alarm to prevent danger, with CO and gas levels displayed.
Pavojaus signalo atveju:
- Nepanikuoju.
- Atidarykite langus ir duris, kad išvėdintumėte erdvę.
- Turn off all gas appliances and sources.
- Nedelsiant evakuoti patalpas.
- Skambinkite savo dujų tiekėjui arba pagalbos tarnyboms iš saugios vietos.
- Do not re-enter the premises until it has been declared safe by professionals.
Priežiūra
- Reguliarus valymas: Gently wipe the detector's exterior with a soft, damp cloth. Do not use cleaning agents, solvents, or abrasive materials.
- Mėnesio testas: Perform the self-test function (short press 'O' button) at least once a month to ensure proper operation.
- Venkite kliūčių: Ensure that the detector's ventilation openings are not blocked by dust, dirt, or other objects.
- Jutiklio tarnavimo laikas: Gas and CO sensors have a limited lifespan. Refer to the product specifications or manufacturer's guidelines for replacement recommendations.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Detektorius neįsijungia. | Nėra elektros iš lizdo. | Check the power outlet with another appliance. Ensure the detector is fully plugged in. |
| Red indicator light / Alarm during self-test. | Sensor malfunction or mute error. | Unplug and re-plug the detector. If the issue persists, contact customer support. |
| Klaidingi aliarmai. | Interference from strong fumes (e.g., cleaning products, paint, aerosols) or high humidity. | Ensure proper ventilation. Relocate the detector away from sources of fumes or excessive humidity. |
| Ekranas tuščias arba neįskaitomas. | Maitinimo problema arba ekrano gedimas. | Check power connection. If still blank, contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Gedsffati customer support.
Specifikacijos
| Modelio numeris | HD08 |
| Prekės ženklas | Gedsffati |
| Dalies numeris | YDT-EU-HD08-G-WHITE-2PCS |
| Spalva | Baltas |
| Stilius | Prijunkite |
| Maitinimo šaltinio tipas | Su laidu elektra |
| ttage | 230 voltai (kintamoji srovė) |
| Baterijos įtrauktos | Nr |
| Reikalingos baterijos | No (1 Lithium Polymer batteries required for internal functions, not user replaceable) |
| Prekės svoris | 60 gramų |
| Gaminio matmenys (I x P x A) | 8.5 x 5.1 x 3.3 cm |
| UPC | 747086495947 |
Garantija ir palaikymas
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support or further assistance, please contact Gedsffati customer service through their official websvetainėje arba kontaktinę informaciją, pateiktą kartu su gaminio pakuote.
