Ortis Electronic Adjustable Float Switch Controller with Dual Sensors

1. Saugos informacija

Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.

• Elektros sauga: Ensure the power supply is disconnected before performing any installation, maintenance, or troubleshooting. All electrical connections must comply with local codes and regulations. This device operates on 110/220V AC.
• Kvalifikuotas personalas: Installation and wiring should only be performed by a qualified electrician or trained professional.
• Vandens sauga: Avoid direct contact with water when the device is powered on. Ensure all connections are watertight and protected from moisture.
• Numatytas naudojimas: This controller is designed for water level management in sump pits, water tanks, and similar applications. Do not use for purposes other than its intended design.
• Apsauga nuo perkrovos: The unit includes built-in overload protection. Do not bypass or modify this safety feature.

2. Produktas baigtasview

The Ortis Electronic Adjustable Float Switch Controller is an advanced water level management system designed for reliability and versatility. It features dual sensors, LED indicators for status monitoring, and supports both drain and fill modes with adjustable load running options.

Pagrindinės funkcijos:

• Dvigubi režimai: Supports both drainage and water replenishment (fill) operations.
• Adjustable Load Running Modes: Three selectable modes for optimized pump control.
• Dual Hi-Lo Sensors: Patented 304 stainless steel electrodes offer corrosion resistance and long lifespan (up to 10 years maintenance-free).
• No Moving Parts: Ensures stable and reliable operation, unlike traditional float switches.
• LED indikatoriai: Provides instant visual feedback on system status and selected mode.
• Išmanieji įspėjimai: Built-in overload protection and real-time alarms for pump failures, clogs, or abnormal discharge.
• Visuotinis suderinamumas: Compatible with sump and utility pumps rated up to 2Hp/20A.

Komponentai:

• Ortis Water Level Controller Unit
• Dual Hi-Lo Electrode Sensors (pre-attached)
• Maitinimo laidas su kištuku

1 paveikslas: The Ortis Water Level Controller unit with its dual electrode sensors and power cord. This image displays the main control unit, which features an input/output socket, LED indicators for Drain, Water, DisAlarm, Auto, Off, On, and Load, along with a Mute button. Two sensors are connected via cables, ready for installation.

2 paveikslas: ir baigtaview of the Ortis Hi-Lo Sump Pump Controller's key features. This diagram highlights LED indicators, Water Mode, Drain Mode, 3 Load Running Modes, Compatibility, and Overload Protection, illustrating the versatility and safety aspects of the device.

3. Sąranka ir diegimas

3.1 Controller Unit Installation

The controller unit can be installed using two primary methods:

• Montavimas ant sienos: Use screws to secure the controller to a wall or vertical surface. Ensure it is mounted in a dry location, away from direct water exposure.
• Adhesive Hook Mounting: For temporary or non-invasive installations, an adhesive hook can be used to hang the controller. Ensure the surface is clean and dry before applying the hook.

3 paveikslas: Illustration of the two installation methods for the Ortis Water Level Controller: screw mounting to a wall and hanging with an adhesive hook. The image shows the back of the controller with a keyhole slot for hanging and mounting tabs for screws.

3.2 Jutiklio montavimas

The dual electrode sensors are designed for adjustable water level detection. They can be positioned to detect water levels within a range of 0.5 inches to 20 inches.

• Padėties nustatymas: Place the sensors in the water tank, sump pit, or reservoir where water level monitoring is required. The sensors should be vertically oriented.
• Aukščio reguliavimas: The high (Hi) and low (Lo) sensors can be adjusted independently along their cables to set the desired activation and deactivation points for your pump. The distance between the two sensors determines the operational range.
• Securing Sensors: Use the provided suction cups or cable ties to secure the sensor cables and electrodes in place, preventing movement that could affect accuracy.

4 paveikslas: Diagram illustrating the adjustable range of the Ortis water level sensors, from 0.5 inches to 20 inches. It shows how the individual sensors can be moved along a vertical rod to set precise high and low water detection points. An inset shows a close-up of a single sensor with its installation method.

3.3 Elektros prijungimas

• Maitinimas: Plug the controller's power cord into a standard 110V or 220V AC outlet.
• Siurblio jungtis: Plug your sump pump or utility pump into the output receptacle on the Ortis controller. Ensure the pump's electrical rating does not exceed 2Hp/20A.

5 paveikslas: An illustrative diagram showing a typical installation of the Ortis Water Level Controller in a sump pit. The controller is wall-mounted, and its sensors are submerged in the pit, connected to a sump pump. This visual guide demonstrates the physical setup and connections.

4. Naudojimo instrukcijos

The Ortis controller offers intuitive operation with LED indicators and a mode selection button.

4.1 Režimo pasirinkimas

The controller supports two main operational modes: Drenažo režimas ir Water Mode (Fill). It also features three adjustable load running modes.

• Drenažo režimas: Ideal for sump pits and sewage pits. The pump activates when water reaches the high sensor and deactivates when it drops below the low sensor, effectively draining the area.
• Water Mode (Fill): Suitable for water tanks or fish tanks. The pump activates when water drops below the low sensor and deactivates when it reaches the high sensor, replenishing the water.
• Load Running Modes: Refer to the detailed instructions in the included quick start guide for specific configurations of the three load running modes. These modes allow for fine-tuning of pump cycling behavior.

4.2 LED indikatoriai

The front panel features several LED indicators to provide real-time status information:

• Drain LED: Illuminates when the controller is operating in Drain Mode.
• Water LED: Illuminates when the controller is operating in Water Mode (Fill).
• DisAlarm LED: Indicates a system alarm (e.g., pump failure, clog, abnormal discharge).
• AUTO/OFF/ON LEDs: Show the current operational state of the pump (Automatic, Off, or Manually On).
• Apkrovos šviesos diodas: Illuminates when the connected pump is actively running.

6 paveikslas: Iš arti view of the Ortis Water Level Controller's LED indicators and control buttons. This image details the 'Drain', 'Water', 'DisAlarm' LEDs, the 'Mute' button, and the 'AUTO', 'OFF', 'ON' selection buttons with their corresponding 'Load' indicator, providing a clear guide to the user interface.

4.3 Intelligent Overload & Failure Alerts

The controller is equipped with advanced safety features:

• Apsauga nuo perkrovos: Automatically activates when the current drawn by the connected pump exceeds 23A, preventing damage to the pump and controller.
• Realaus laiko aliarmai: The system provides alerts for pump failures, clogs, or abnormal discharge conditions. The 'DisAlarm' LED will illuminate.
• Nutildymo funkcija: An alarm can be silenced for up to 24 hours by pressing the 'Mute' button, useful during temporary maintenance or inspection.

5. Priežiūra

The Ortis Electronic Adjustable Float Switch Controller is designed for minimal maintenance.

• Jutiklio valymas: The 304 stainless steel electrode sensors are corrosion-resistant and designed to be maintenance-free for up to 10 years. However, in environments with heavy mineral buildup or debris, occasional inspection and gentle cleaning of the electrodes may be beneficial to ensure accurate readings. Always disconnect power before cleaning.
• Valdiklio blokas: Keep the controller unit clean and dry. Wipe with a soft, damp cloth if necessary. Do not use abrasive cleaners or immerse the unit in water.
• Kabelio apžiūra: Periodically inspect all cables for signs of wear, damage, or fraying. Replace any damaged cables immediately.

6. Problemų sprendimas

This section provides solutions to common issues you might encounter with your Ortis Water Level Controller.

7. Specifikacijos

8. Garantija ir palaikymas

For specific warranty information, please refer to the documentation included with your purchase or contact Ortis customer support directly. General support inquiries can be directed to the manufacturer via their official websvetainėje arba pirkimo vietoje pateiktą kontaktinę informaciją.

When contacting support, please have your product model number (ETC-106) and purchase date available.