Įvadas
This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting Ion 2in LED Round Recessed Light. Please read this manual thoroughly before installation and retain it for future reference.
Svarbi saugos informacija
- ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami arba atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
- ĮSPĖJIMAS: Risk of fire. Use only with specified dimmers.
- Montavimą turi atlikti kvalifikuotas elektrikas, vadovaudamasis Nacionaliniu elektros kodeksu ir vietiniais kodeksais.
- Įsitikinkite, kad visos elektros jungtys yra tvirtos ir tinkamai izoliuotos.
- Nekeiskite įrenginio. Bet kokie pakeitimai gali panaikinti garantiją ir sukelti pavojų saugai.
- Suitable for wet locations, IC-Rated for direct contact with insulation, and Airtight.
- Veikimo ttage: 120V-277V AC.
Pakuotės turinys
Confirm all components are present before beginning installation.
- LED Light and Trim
- LED Driver and Cable
- Housing or Frame-in Kit (New Construction)
- Tvirtinimo detalių paketas
- Instrukcijų vadovas (šis dokumentas)
Sąranka ir diegimas
This section outlines the steps for installing your WAC Lighting Ion recessed light. A frame-in kit is included for new construction installations.
1. Paruoškite įrengimo vietą
Ensure power is disconnected at the circuit breaker. Identify the desired location for the fixture. This fixture requires a 3-inch round ceiling cutout. The ceiling thickness should be between 0.5 inches and 1.5 inches.
This image displays a technical diagram with dimensions for the frame-in kit and the driver box. It shows the overall length of the frame-in kit, the cutout size, and the dimensions of the external driver box, including its height and width.
2. Install the Frame-in Kit (New Construction)
Position the frame-in kit in the ceiling joists. Secure the frame-in kit using appropriate mounting hardware. The adjustable bars allow for flexible positioning between joists.
This image illustrates the main components of the WAC Lighting Ion recessed light: the metal frame-in kit, the separate driver box with wiring, and the round LED light engine with retention clips. It shows how the driver box connects to the light engine and how the frame-in kit supports the entire assembly.
3. Elektrinis sujungimas
The driver box includes 5 knockouts for electrical connections. Connect the universal input driver (120V-277V) to the main power supply according to local electrical codes. Use the male-to-female quick connect locking cable to join the light engine to the driver box.
4. Install the Light Engine
Once the frame-in kit is secured and electrical connections are made, insert the LED light engine into the 3-inch ceiling cutout. The retention clips on the light engine will hold it securely in place.
Naudojimo instrukcijos
1. Įjunkite maitinimą
Restore power at the circuit breaker. The light should illuminate.
2. 5-CCT Selectable Color Temperature
The Ion fixture features a 5-CCT selectable switch located on the driver box. Before final installation of the light engine, select your desired color temperature from the following options: 2700K, 3000K, 3500K, 4000K, or 5000K. Adjust the switch to the preferred setting.
This image highlights the 5-CCT (Correlated Color Temperature) selectable switch, typically found on the driver box. It shows the different Kelvin temperature options (2700K, 3000K, 3500K, 4000K, 5000K) that can be chosen by sliding the switch.
3. Pritemdymo funkcija
This fixture is compatible with electronic low voltage (ELV) or TRIAC dimmers. It provides smooth and continuous dimming. With ELV dimmers, it dims down to 10%, and with TRIAC dimmers, it dims down to 5%.
Priežiūra
- Ensure power is off before performing any maintenance.
- Valykite įrenginį minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- The LED module is replaceable, with a rated life of 50,000 hours. Contact WAC Lighting for replacement parts if needed.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia. | Nėra maitinimo. Atsipalaidavusi laidų jungtis. Faulty switch or dimmer. |
Patikrinkite grandinės pertraukiklį ir sieninį jungiklį. Patikrinkite, ar visos laidų jungtys yra saugios. Test with a known working switch or bypass the switch temporarily. |
| Šviesa mirga arba pritemsta netolygiai. | Nesuderinama pritemdymo sistema. Atsilaisvinę laidai. Perkrauta grandinė. |
Ensure dimmer is ELV or TRIAC compatible. Patikrinkite visas laidų jungtis. Reduce load on the circuit or consult an electrician. |
| Neteisinga spalvų temperatūra. | CCT jungiklis nustatytas neteisingai. | Turn off power, access the driver box, and adjust the 5-CCT selectable switch to the desired setting. |
Specifikacijos
- Modelis: R2DRDN-F9CS-WT
- Prekinis ženklas: WAC apšvietimas
- Tipas: 2in LED Round Recessed Light
- Galia: 9W
- Pristatomi liumenai: 725lm
- CRI: 90
- Įvertintos valandos: 50,000
- Spalvos temperatūra: 5-CCT Selectable (2700K, 3000K, 3500K, 4000K, 5000K)
- ttage: 120V-277V Universalus
- Pritemdymas: ELV (to 10%), TRIAC (to 5%)
- Išpjovos dydis: 3 coliai (apvalūs)
- Lubų storis: nuo 0.5 iki 1.5 colių
- Medžiaga: Die-cast aluminum with 20-gauge steel driver box
- Sertifikatai: ETL & cETL UL #1598, IC-Rated, Airtight, CEC Title 24 Compliant, Energy Star 2.0 Certified, Title 24 JA8-2016
- Naudojimas viduje / lauke: Indoor, Outdoor (Wet Location Listed)
- Gaminio matmenys: 12.4"L x 10.43"W x 4.25"H (Frame-in kit and driver box)
Garantija ir palaikymas
This WAC Lighting product is covered by a 5-year manufacturer's warranty. For warranty claims or technical support, please contact WAC Lighting customer service. Retain your proof of purchase for warranty validation.
For additional information or support, visit the official WAC Lighting websvetainėje arba susisiekite su klientų aptarnavimo skyriumi.
WAC Lighting is a registered trademark. All rights reserved.
