1. Svarbi saugos informacija
Prieš surinkdami ir naudodami, perskaitykite ir supraskite visas instrukcijas. Išsaugokite šį vadovą ateičiai.
- Always follow the assembly instructions carefully. Ensure all parts are securely fastened before use.
- Use caution when adjusting the leg pads to prevent injury or instability.
- Do not overload the table. The maximum load capacity for the top surface is 100 lbs (45 kg), and each internal shelf is 50 lbs (22.7 kg). Overloading may cause the table to tip over, resulting in injury or damage.
- Laikykite vaikus ir naminius gyvūnus atokiau nuo surinkimo zonos. Mažos dalys gali kelti užspringimo pavojų.
- Ensure the charging station is connected to a properly grounded outlet. Do not expose the charging station to moisture.
2. Produktas baigtasview
The ONBRILL Oval End Table is designed for versatile use in various settings, offering both storage and convenient charging capabilities.
Pagrindinės funkcijos:
- Integruota įkrovimo stotelė: Equipped with 2 standard power outlets, 1 USB port, and 1 Type-C port for convenient device charging.
- Sliding Tambour Door: Provides easy access to the storage compartment while maintaining a clean aesthetic.
- Adjustable Internal Shelf: Allows customization of storage space to accommodate various item sizes.
- Reguliuojami kojų paminkštinimai: Užtikrina stabilumą ant nelygių grindų paviršių.
- Patvari konstrukcija: Made from wood and metal components for lasting use.
Gaminio matmenys:
16 colio gylis x 20 colio plotis x 23.5 colio aukštis (40.6 cm gylis x 50.8 cm plotis x 59.7 cm aukštis)
Item Weight: 20 Pounds (9.07 kg)
2.1 pav.: Gaminio matmenys ir keliamoji galia
3. Surinkimo instrukcijos
All parts and accessories are numbered for easy identification. Follow the steps below carefully. Tools recommended for assembly include a hammer and screwdriver.
Surinkimo vaizdo įrašo vadovas:
Video 3.1: ONBRILL End Table Installation Guide
This video provides a comprehensive visual guide for assembling your ONBRILL Oval End Table. It demonstrates each step from unboxing to final setup, including the installation of the charging station and adjustable shelf.
Žingsnis po žingsnio surinkimas:
- Šoninių plokščių paruošimas: Insert cam bolts (B) into the designated holes on the side panels (parts 3 and 4). Ensure they are screwed in firmly.
- Pritvirtinkite skersinį: Connect the crossbar (part 5) between the two side panels (3 and 4) using cam locks (A). Tighten the cam locks to secure the connection.
- Įdėkite apatinį skydelį: Slide the bottom panel (part 6) into the grooves of the assembled side structure.
- Attach Top Panel (Base): Secure the oval base panel (part 2) to the top of the assembled structure using cam bolts (C) and screws (D).
- Įdėkite galinį skydelį: Carefully slide the back panel (part 6, if applicable, or the second bottom panel) into the rear grooves of the structure.
- Prepare Top Surface: Insert cam bolts (B) into the underside of the main oval top surface (part 1).
- Attach Main Top Surface: Align the main oval top surface (part 1) with the assembled structure and secure it using cam locks (A) and screws (C).
- Įdiekite kojas: Attach the four legs (L) to the bottom of the table using the provided screws (F). Ensure they are tightly fastened.
- Install Shelf Pins: Insert the shelf pins (K) into the desired height adjustment holes on the inner side panels.
- Pritvirtinkite durų rankenas: Secure the handles (part 9) to the tambour doors (parts 7 and 8) using screws (E). Ensure the process hole at the end of the handle faces downwards.
- Insert Tambour Doors: Carefully slide the tambour doors (parts 7 and 8) into the top and bottom grooves of the table structure.
- Adjust Shelf: Place the adjustable shelf (part 10) onto the installed shelf pins (G) at your preferred height.
- Įrengti įkrovimo stotelę: Feed the power cord (H) through the designated hole on the top surface. Insert the charging station into its recess and secure it with screws (I).
4. Naudojimo instrukcijos
Įkrovimo stoties naudojimas:
The integrated charging station provides convenient power access for your devices.
- Plug the table's power cord into a standard 125V/12A wall outlet.
- Use the 2 AC outlets for larger electronics.
- Connect your devices to the 5V/2A USB port or 5V/2A Type-C port for charging smartphones, tablets, and other compatible devices.
Figure 4.1: Charging Station in Use
Sliding Tambour Door:
The tambour door slides smoothly along the curved track to reveal or conceal the storage compartment. Gently push or pull the handles to open and close the door.
Adjusting the Internal Shelf:
The internal shelf can be adjusted to different heights to suit your storage needs.
- Remove any items from the shelf.
- Carefully lift the shelf and remove the four shelf pins (G) from their current holes.
- Įstatykite lentynos kaiščius į norimą skylių rinkinį naujame aukštyje. Įsitikinkite, kad visi keturi kaiščiai yra viename lygyje.
- Uždėkite lentyną atgal ant kaiščių.
4.2 pav.: Reguliuojamas lentynos mechanizmas
Kojų pagalvėlių reguliavimas:
The adjustable leg pads help stabilize the table on uneven floors. Rotate the bottom of each leg pad clockwise to raise or counter-clockwise to lower until the table is stable and level.
5. Priežiūra
- Valymas: Wipe the table surface with a soft, dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately. Avoid abrasive cleaners or harsh chemicals, as they may damage the finish.
- Išsiliejimai: Nedelsdami nuvalykite išsiliejusius skysčius, kad mediena nebūtų dėmių ar pažeista.
- Patikra: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite.
- Vieta: Venkite stalo statyti tiesioginiuose saulės spinduliuose arba šalia šilumos šaltinių, nes tai gali išblukinti arba deformuotis.
6. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Stalas nestabilus / nestabilus. | Uneven floor or loose leg pads. | Adjust the leg pads by rotating them until the table is stable. Ensure all assembly screws are tightened. |
| Įkrovimo stotelė neveikia. | Power cord not plugged in, outlet issue, or device incompatibility. | Ensure the table's power cord is securely plugged into a working wall outlet. Test the outlet with another device. Verify your device is compatible with the USB/Type-C ports. |
| Stumdomos durys sunkiai juda arba užstringa. | Debris in the track or misalignment. | Inspect the top and bottom tracks for any obstructions and remove them. Ensure the door is properly seated in the grooves. |
| Shelf does not fit or is uneven. | Shelf pins incorrectly installed. | Ensure all four shelf pins are inserted into corresponding holes at the same height. |
7. Specifikacijos
- Prekinis ženklas: ONBRILL
- Modelio numeris: ON COT-123
- Gaminio matmenys: 16 "D x 20" P x 23.5" A
- Prekės svoris: 20 svaro
- Rėmo medžiaga: Mediena
- Medžiagos tipas: Metalas, Mediena
- Spalva: Black (for this variant)
- Forma: Ovalus
- Table Design: Pabaigos lentelė
- Baldų apdaila: Dėmėtas
- Įtraukti komponentai: Adjustable Leg Pads, Adjustable Shelf, Charging Station, Sliding Door
- Reikalingas surinkimas: Taip
- Rekomenduojami surinkimo įrankiai: Plaktukas, atsuktuvas
- Naudojimas viduje / lauke: Vidinis
- Charging Station Output: 2 x 125 V / 12 A kintamosios srovės lizdai, 1 x 5 V / 2 A USB prievadas, 1 x 5 V / 2 A C tipo prievadas
- Maitinimo laido ilgis: 6.56 ft (2 metrai)
8. Garantija ir palaikymas
For warranty information, product support, or to report missing/damaged parts, please contact ONBRILL customer service. Refer to your purchase documentation for specific contact details or visit the official ONBRILL websvetainę.
Klientų aptarnavimas: Please refer to the contact information provided with your purchase or on the ONBRILL official websvetainę.
