Gedsffati 5-in-1 Carbon Monoxide, Smoke, and Combustible Gas Detector (Model HD11) Instruction Manual

1. Produktas baigtasview

The Gedsffati Model HD11 is a versatile 5-in-1 detector designed to monitor your environment for multiple hazards. It integrates sensors for carbon monoxide (CO), smoke, and various combustible gases (such as natural gas, propane, methane, coal gas, gasoline, hexane, butane, benzene, ethylene oxide, acetylene, LPG, and LNG). Additionally, it displays real-time temperature and humidity levels. This device features a plug-in design with a built-in backup battery for continuous operation, even during power outages.

1 vaizdas: priekis view of the Gedsffati HD11 detector, displaying its multi-sensor readings and control buttons.

Pagrindinės funkcijos:

• 5 viename aptikimas: Monitors Carbon Monoxide, Smoke, Combustible Gas, Temperature, and Humidity.
• Plug-in & Play Design: Compatible with 110V to 240V AC outlets for easy installation.
• Integruota atsarginė baterija: 2000 mAh rechargeable lithium battery provides 18-20 hours of operation during power outages.
• 2.1'' HD Screen: High-definition display for clear, real-time data readings.
• Garsinis signalas: 85 dB alarm to alert users to detected hazards.
• Nešiojamas dizainas: Includes a magnetic part and lanyard for flexible placement and travel use.

2. Sąranka ir diegimas

Įrenginio išpakavimas:

Carefully remove the detector from its packaging. Ensure all components listed in the 'What's in the Box' section are present.

• 1x Gedsffati 5-in-1 CO & Smoke & Gas detector
• 1x naudojimo instrukcija

Įrenginio maitinimas:

The detector is designed for plug-in operation. Insert the US standard plug into a 110V to 240V AC outlet. The device will automatically power on and begin monitoring. The built-in 2000 mAh lithium battery will charge while plugged in, providing backup power for approximately 18-20 hours in case of a power outage.

Image 2: The Gedsffati HD11 detector showcasing its plug-in feature, internal 2000 mAh backup battery, and included lanyard for portability.

Optimal Placement Guide:

Proper placement is crucial for effective detection of carbon monoxide, smoke, and combustible gases. Refer to the diagram below for recommended installation locations in various rooms.

Image 3: A floor plan diagram indicating ideal locations for smoke, CO, and combustible gas detectors throughout a home.

• Carbon Monoxide (CO) Detectors: Install near sleeping areas and on every level of your home.
• Dūmų detektoriai: Install inside each bedroom, outside each sleeping area, and on every level of the home.
• Combustible Gas Detectors: Install in areas where gas appliances are present, such as kitchens, utility rooms, and basements.
• Avoid placing detectors directly above heat sources, near windows, or in areas with high airflow that might dilute gas concentrations.

3. Naudojimo instrukcijos

Rodyti daugiauview:

The 2.1-inch HD screen provides real-time information at a glance. Key indicators include:

• CO PPM: Anglies monoksido koncentracija milijoninėmis dalimis.
• GAS Icon: Indicates detection of combustible gas.
• SMOKE Icon: Indicates detection of smoke.
• Temperatūra: Current room temperature (can be switched between Celsius and Fahrenheit).
• Drėgmė: Dabartinė santykinė oro drėgmė proctage.
• Akumuliatoriaus piktograma: Rodo esamą baterijos lygį.
• Signalinio signalo būsena: Indicates if the alarm sound is active or muted.
• Indikatoriaus lemputė: Green light for normal operation, red light for alarm or malfunction.

4 pav.: Išsamus view of the HD11 display and button functions.

Mygtukų funkcijos:

• Maitinimo mygtukas (centre): Short press for self-testing. Long press to turn off when operating on battery power.
• Screen Brightness Button (Left): Short press to change screen brightness level. Long press to switch temperature units between Celsius and Fahrenheit.
• Buzzer Button (Right): Short press to turn off the buzzer during an alarm.

Self-Test Procedure:

It is recommended to test the detector regularly to ensure proper functionality.

1. Trumpai paspauskite Maitinimo mygtukas to initiate a self-test. The device will check all sensors and sound the alarm briefly.
2. To test the smoke sensor, you can use a smoky cigarette or a small amount of smoke from unburned paper. Approach the detector with the smoke. The CO value may change, and the alarm will sound when the alarm value is reached. Pastaba: Do not test with car exhaust or burning gas in open areas, as low CO values may not trigger the sensor.

Image 5: Visual guide for testing the detector's smoke sensor.

4. Safety Information and Hazards

Understanding the hazards detected by this device is essential for your safety.

6 vaizdas: Baigtaview of hazards detected by the device.

Anglies monoksido (CO) pavojus:

Carbon monoxide is a colorless, odorless, and non-irritating toxic gas. Mild poisoning can cause headaches, dizziness, palpitations, nausea, vomiting, limb weakness, and brief fainting. Moderate poisoning may result in coma or collapse. High concentrations can lead to varying degrees of poisoning symptoms, endangering the brain, heart, liver, kidneys, and other tissues, potentially leading to electrocution-like death.

Combustible Gas Hazard:

Natural gas is a colorless, odorless, non-toxic, and non-corrosive gas. Methane itself poses no harm to the human body but can act as a suffocant. When natural gas leaks, it may emit toxic carbon monoxide, causing dizziness and discomfort. In severe cases, it can lead to poisoning and death. If the concentration of natural gas reaches 100%, there is a risk of suffocation.

Smoke Hazard:

Thick smoke contains a large amount of harmful particles, such as carbon monoxide, sulfur dioxide, and nitrogen oxides. Inhaling smoke during a fire can irritate the respiratory mucosa, causing coughing, chest tightness, and shortness of breath. Prolonged exposure to thick smoke can also cause damage to the nervous and cardiovascular systems.

5. Priežiūra

To ensure the long-term reliability and accuracy of your Gedsffati HD11 detector, regular maintenance is recommended.

• Reguliarus testavimas: Perform a self-test (short press the Power Button) at least once a month to confirm the alarm and sensors are functioning correctly.
• Valymas: Gently wipe the exterior of the detector with a soft, dry cloth. Do not use cleaning sprays, polishes, or solvents, as these can damage the device or interfere with sensor operation.
• Venkite kliūčių: Ensure that the air vents on the device are not blocked by dust, dirt, or other objects, as this can impair detection capabilities.
• Baterijos patikrinimas: The device's display shows the battery status. Ensure the device is regularly plugged in to keep the backup battery charged.

6. Problemų sprendimas

If your Gedsffati HD11 detector is not functioning as expected, refer to the following common issues and solutions:

• Nėra ekrano / įrenginys neįsijungia:
  • Ensure the device is securely plugged into a working AC outlet.
  • Check if there is power to the outlet.
  • If operating on battery, ensure the battery is charged.
• Alarm Sounds Without Apparent Hazard:
  • For Smoke: Check for cooking fumes, steam, or dust that might trigger the alarm. Relocate the detector if false alarms are frequent due to normal activities.
  • For Gas: Check for minor gas leaks from appliances. Ventilate the area.
  • For CO: Ventilate the area immediately. If the alarm persists, evacuate and contact emergency services.
  • Perform a self-test to confirm sensor functionality.
• Red Indicator Light On (Malfunction):
  • A continuous red light or specific error codes on the display may indicate a sensor malfunction or other internal issue.
  • Try unplugging the device for a few minutes and plugging it back in.
  • Jei problema išlieka, susisiekite su klientų aptarnavimo tarnyba.
• Ekrano ryškumo reguliavimas:
  • Short press the Screen Brightness Button to cycle through brightness levels or turn the screen off.
• Temperature Unit Change:
  • Long press the Screen Brightness Button to switch between Celsius and Fahrenheit.

7. Specifikacijos

8. Garantija ir palaikymas

Informacija apie garantiją:

Please refer to the warranty card included with your product or contact Gedsffati customer service for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase for any warranty claims.

Klientų aptarnavimas:

For technical assistance, troubleshooting not covered in this manual, or any other inquiries, please contact Gedsffati customer support through the contact information provided on the product packaging or the official Gedsffati websvetainę.

9. Produktų vaizdo įrašai

No official product videos from the seller (Gedsffati) were available for embedding. Please refer to the product page for any available video content.