GAOMON 67-inch Acrylic Freestanding Bathtub Instruction Manual

1. Įvadas

Thank you for choosing the GAOMON 67-inch Acrylic Freestanding Bathtub. This manual provides essential information for the safe installation, operation, and maintenance of your new bathtub. Please read all instructions carefully before beginning installation or use to ensure proper function and longevity of the product. Keep this manual for future reference.

2. Saugos informacija

• Prieš montuodami ir naudodami visada perskaitykite ir supraskite visas instrukcijas.
• Professional installation by a licensed plumber is highly recommended to ensure compliance with local codes and proper function.
• Ensure the floor structure can support the weight of the bathtub when filled with water and a person. Consult a structural engineer if unsure.
• Exercise caution when entering and exiting the bathtub. The non-slip surface provides traction, but wet surfaces can still be slippery.
• Test water temperature before entering the tub to prevent scalding.
• Do not use abrasive cleaners, harsh chemicals, or sharp objects on the bathtub surface, as this can damage the finish and compromise the non-slip properties.
• This bathtub is CUPC Certified, indicating compliance with North American plumbing standards.

3. Pakuotės turinys

Prieš pradėdami montavimą, patikrinkite, ar yra visi komponentai ir ar jie nepažeisti. Jei trūksta kokių nors dalių arba jos pažeistos, nedelsdami susisiekite su klientų aptarnavimo tarnyba.

• Freestanding Bathtub (1 unit)
• Matte Drain Assembly (1 set)
• Overflow Assembly (1 set)
• Flexible Drain Hose (1 unit)
• Adjustable Leveling Feet (pre-installed or separate, verify upon unpacking)

4. Sąranka ir diegimas

This section outlines the general steps for installing your freestanding bathtub. Specific plumbing configurations may vary. Always consult a licensed plumber.

4.1 Kontrolinis sąrašas prieš įdiegiant

• Įsitikinkite, kad montavimo vieta yra švari, lygi ir konstrukciškai tvirta.
• Confirm that hot and cold water supply lines and a drain pipe are correctly positioned according to local plumbing codes.
• Unpack the bathtub and inspect for any shipping damage.

4.2 diegimo žingsniai

1. Positioning the Bathtub: Carefully move the bathtub to its desired location. Ensure there is adequate space around the tub for cleaning and maintenance.
2. Lygiavimo kojelių reguliavimas: Use a level to ensure the bathtub is perfectly level. Adjust the leveling feet located on the bottom of the tub as needed. This is crucial for proper drainage and stability.
3. Connecting Drain and Overflow: Connect the flexible drain hose from the bathtub's drain assembly to your floor drain pipe. Ensure all connections are secure and watertight. Install the overflow assembly according to the manufacturer's instructions, ensuring a tight seal.
4. Vandens bandymas: Fill the bathtub with water and let it sit for at least 10 minutes. Carefully inspect all drain and overflow connections for any leaks. Drain the tub and re-inspect. Address any leaks immediately before proceeding.
5. Sealing (Optional but Recommended): Apply a bead of silicone sealant around the base of the bathtub where it meets the floor. This helps prevent water from seeping underneath and provides additional stability. Allow the sealant to cure completely before use.

Image 1: GAOMON 67-inch Acrylic Freestanding Bathtub. This image shows the overall design of the bathtub, highlighting its modern aesthetic and ribbed exterior.

5. Naudojimo instrukcijos

• Filling the Bathtub: Ensure the drain stopper is closed. Turn on the water supply to fill the tub to your desired level. Always check the water temperature before entering.
• Soaking Experience: The ergonomic deep design and integrated lumbar support are crafted for comfort. The double-walled insulation helps maintain water temperature for extended soaking periods.
• Draining the Bathtub: Open the drain stopper to allow water to flow out. The matte drain and overflow system are designed for efficient water removal.

6. Priežiūra

Regular cleaning and proper care will preserve the appearance and functionality of your bathtub.

• Paviršiaus valymas: Clean the bathtub regularly with a soft cloth or sponge and a mild, non-abrasive bathroom cleaner. Rinse thoroughly with clean water after cleaning.
• Kaip išvengti žalos: Do not use abrasive powders, scouring pads, steel wool, or cleaners containing ammonia, bleach, or harsh acids, as these can scratch or dull the acrylic finish and damage the non-slip surface.
• Drenažo priežiūra: Periodically remove and clean the drain stopper to prevent hair and debris buildup, which can cause slow drainage.
• Neslidus paviršius: The integrated non-slip surface requires no special treatment beyond regular cleaning. Avoid applying waxes or polishes that could reduce its effectiveness.

7. Problemų sprendimas

Refer to this section for solutions to common issues. For problems not listed here, contact customer support or a qualified professional.

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information, please refer to the documentation provided at the time of purchase or contact GAOMON customer support directly. If you encounter any issues or require assistance with your bathtub, please reach out to our customer service team. Provide your model number and purchase date for faster service.

Gamintojas: GAOMONAS

Kontaktinė informacija: Please refer to your purchase receipt or the official GAOMON websvetainę, kurioje rasite naujausią klientų aptarnavimo kontaktinę informaciją.