ONBRILL ON 1002VA-24

ONBRILL 24 Inch Floating Bathroom Vanity with Sink Combo User Manual

Model: ON 1002VA-24

1. Įvadas

Thank you for choosing the ONBRILL 24 Inch Floating Bathroom Vanity with Sink Combo. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new vanity. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

2. Saugos informacija

  • Always ensure the vanity is securely mounted to a wall stud or appropriate wall anchors to prevent tipping.
  • Surinkimui reikalingi bent du suaugę asmenys.
  • Wear appropriate safety gear, such as gloves and eye protection, during assembly and installation.
  • Neperveržkite varžtų, nes tai gali pažeisti medžiagą.
  • Keep small parts and hardware away from children and pets to prevent choking hazards.
  • Ensure all plumbing connections are properly sealed to prevent leaks.
  • Avoid using harsh chemicals or abrasive cleaners on the vanity or sink, as this may damage the finish.

3. Pakuotės turinys

Verify that all components and hardware are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Sprogo view of ONBRILL vanity components with numbered parts

3.1 pav.: sprogo view of vanity components.

The package includes the vanity cabinet, ceramic integrated sink, and all necessary assembly hardware. Faucet and drain kit are not included.

4. Sąranka ir surinkimas

Assembly is estimated to take approximately 1 hour with two adults. A screwdriver and drill are recommended tools.

4.1. Surinkimo laipteliaiview

For a visual guide, please refer to the official installation video below. Detailed step-by-step instructions are also provided in the images.

Video 4.1: Official ONBRILL Bathroom Vanity Installation Guide. This video demonstrates the complete assembly process for the vanity cabinet and mounting to the wall.

4.2. Detailed Assembly Instructions

  1. Prepare the Side Panels: Attach the drawer slides to the side panels (parts 1 and 2) using screws (A). (Refer to image for step 1)
  2. Step 1: Attaching drawer slides to side panels

    Image 4.2.1: Attaching drawer slides to side panels.

  3. Assemble the Back Panel: Connect the back panel (part 4) to the bottom panel (part 14) using cam locks (B) and dowels (C). (Refer to image for step 2)
  4. Step 2: Assembling the back panel to the bottom panel

    Image 4.2.2: Assembling the back panel.

  5. Pritvirtinkite šonines plokštes prie pagrindo: Secure the side panels (parts 3 and 5) to the bottom panel (part 1) using cam locks (B) and dowels (C). (Refer to image for step 3)
  6. Step 3: Attaching side panels to the base

    Image 4.2.3: Attaching side panels.

  7. Complete the Cabinet Frame: Attach the top panel (part 2) to the assembled structure using cam locks (B) and dowels (C). (Refer to image for step 4)
  8. Step 4: Completing the cabinet frame with the top panel

    Image 4.2.4: Completing the cabinet frame.

  9. Surinkite stalčių dėžes: Construct the drawer boxes (parts 7, 8, 9, 10, 11, 12) by screwing the sides together with screws (D). (Refer to image for step 5)
  10. Step 5: Assembling the drawer boxes

    Image 4.2.5: Assembling drawer boxes.

  11. Pritvirtinkite stalčių priekius: Secure the fluted drawer fronts (part 6) to the assembled drawer boxes using cam locks (B). (Refer to image for step 6)
  12. Step 6: Attaching fluted drawer fronts to drawer boxes

    Image 4.2.6: Attaching drawer fronts.

  13. Stalčių rankenų montavimas: Attach the metal handles to the drawer fronts using screws (E) and brackets (F). (Refer to image for step 7)
  14. Step 7: Installing metal handles on drawer fronts

    Image 4.2.7: Installing drawer handles.

  15. Spintelės tvirtinimas prie sienos: Drill pilot holes in the wall, insert wall anchors (G), and secure the mounting brackets (H) using screws (J) and washers (I). Hang the cabinet onto the brackets. (Refer to image for step 8)
  16. Step 8: Mounting the cabinet to the wall

    Image 4.2.8: Mounting cabinet to wall.

  17. Įdėti stalčius: Carefully slide the assembled drawers into the cabinet. (Refer to image for step 9)
  18. Step 9: Inserting drawers into the cabinet

    Image 4.2.9: Inserting drawers.

  19. Kriauklės viršaus montavimas: With the help of another adult, gently lower the ceramic integrated sink (part 15) onto the vanity. Apply a bead of caulk (not included) around the edges for a secure and waterproof seal. Wipe away any excess caulk with a soft cloth and allow approximately 24 hours for it to dry. (Refer to image for step 10)
  20. Step 10: Installing the ceramic sink top

    Image 4.2.10: Installing sink top.

5. Operacija

5.1. Drawer Functionality

The vanity features two fluted drawers with soft-closing slide rails. To open, gently pull the metal handle. To close, push the drawer until the soft-close mechanism engages, allowing it to close smoothly and quietly.

Open drawers of the ONBRILL vanity showing storage space and plumbing access

Figure 5.1: Drawers provide ample storage and feature a U-shaped cutout for plumbing.

5.2. Sink Features

The ceramic integrated sink includes an anti-spill hole and a thoughtful overflow drain design to prevent water from overflowing if the faucet is left on. The smooth, rounded edges enhance safety and ease of cleaning.

Close-up of the ceramic sink showing enhanced basin, overflow drain, and rounded edges

5.2 pav. Išsamus view of the sink's practical and safe design features.

6. Priežiūra ir priežiūra

Proper care will ensure the longevity and appearance of your ONBRILL vanity.

  • Spintos valymas: Wipe down the painted surface with a damp, soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Kriauklės valymas: Use a mild soap and water solution with a soft sponge or cloth. Rinse thoroughly and dry to prevent water spots.
  • Išsiliejimai: Promptly clean up any spills to prevent moisture damage, especially on the cabinet surfaces.
  • Techninė įranga: Periodically check and tighten any loose screws on handles or drawer slides.

7. Problemų sprendimas

Jei kyla problemų dėl praustuvo, žr. šiuos įprastus sprendimus:

  • Stalčiai neužsidaro sklandžiai: Check if the drawer slides are properly aligned and free of obstructions. Ensure all screws on the slides are tightened.
  • Water leaks around the sink: Verify that the caulk seal between the sink and vanity is intact. Check all plumbing connections for tightness and proper sealing.
  • Tuštybė jaučiasi nestabili: Ensure the wall mounting brackets are securely fastened to wall studs and that the vanity is properly seated on the brackets.
  • Įbrėžimai arba nedideli pažeidimai: For minor scratches on the cabinet, touch-up paint matching the finish may be used. Consult a professional for significant damage.

If the problem persists, please contact ONBRILL customer support.

8. Specifikacijos

FunkcijaDetalė
Prekės ženklasONBRILL
Modelio pavadinimasON 1002VA-24
Gaminio matmenys18.1 "D x 24" P x 18.5" A
SpalvaMėlyna
MedžiagaInžinierinė mediena
Aukščiausias medžiagos tipasKeramika
Montavimo tipasSieninis laikiklis
Stalčių skaičius2
Ypatinga funkcijaSoft Closing Drawer, Storage
Prekės svoris70 svaro
Diagram showing detailed dimensions of the ONBRILL 24 inch bathroom vanity and sink

8.1 pav.: Išsamūs gaminio matmenys.

9. Garantija ir palaikymas

For warranty information and customer support, please refer to the product's original purchase documentation or contact ONBRILL directly through their official channels. You can visit the ONBRILL Store on Amazon Norėdami gauti daugiau informacijos.

Susiję dokumentai - ON 1002VA-24

Preview ONBRILL 60 colių indauja surinkimo instrukcijos – modelis obai1239
Išsamios ONBRILL 60 colių indaujamos spintelės su 4 durelėmis (modelis obai1239) surinkimo instrukcijos. Įtraukta įvadas, atsargumo priemonės, dalių sąrašas, techninės įrangos sąrašas ir nuoseklios surinkimo instrukcijos.
Preview Assembly Instructions for N710P411227 24 Inch Bath Vanity (Combo)
Detailed assembly instructions for the N710P411227 24 Inch Bath Vanity (Combo). Includes a comprehensive parts list, hardware guide, and step-by-step assembly procedures to ensure proper installation of your bathroom cabinet.
Preview RUBEN-24in Bathroom Vanity Assembly Instructions
Comprehensive assembly instructions for the RUBEN-24in wall-mounted bathroom vanity. This guide details parts identification, hardware usage, step-by-step assembly, and PIVOT-PRO door adjustments for the 24-inch floating plywood storage cabinet with twill double doors and metal trim.
Preview 24 colių vonios spintelės (kombinuotos) surinkimo instrukcijos
Išsamus žingsnis po žingsnio „Winston Porter“ 24 colių vonios kambario praustuvo (kombinuoto) surinkimo vadovas, įskaitant dalių identifikavimą, furnitūros sąrašą ir surinkimo procedūras.
Preview Assembly Instructions: 24 Inch Bath Vanity with Ceramic Sink - Winston Porter
Detailed assembly instructions for the Winston Porter 24 Inch Bath Vanity (Combo) with Ceramic Sink. Includes parts list, hardware list, step-by-step guidance, and hinge adjustment details.
Preview Installation Guide: 24 Inch Wall Mounted Floating Bathroom Vanity with Ceramic Sink
Step-by-step installation guide for a 24-inch wall-mounted floating bathroom vanity cabinet featuring a ceramic sink. Includes hardware selection, assembly instructions, and mounting tips.