ACTBEST Race Electric Bike User Manual

1. Įvadas

Thank you for choosing the ACTBEST Race Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and longevity of your e-bike.

2. Saugos gairės

Your safety is paramount. Always wear a helmet and appropriate safety gear when riding. Familiarize yourself with local traffic laws and regulations regarding electric bicycles. Perform a pre-ride inspection before each use.

• Šalmo naudojimas: Visada dėvėkite sertifikuotą šalmą.
• Kelių eismo taisyklės: Obey all local traffic laws, signs, and signals.
• Patikrinimas prieš važiavimą: Before each ride, check tire pressure, brake function, battery charge, and ensure all quick releases and fasteners are secure.
• Oro sąlygos: Exercise caution when riding in wet conditions, as braking distance may increase.
• Naktinis jojimas: Use headlights and taillights when riding in low-light conditions.
• Svorio limitas: Neviršykite rekomenduojamo maksimalaus 330 svarų svorio.
• Baterijos sauga: Only use the provided charger. Do not expose the battery to extreme temperatures or puncture it.

3. Pakuotės turinys

Išpakuodami patikrinkite, ar yra visi toliau išvardyti daiktai:

• 1 x ACTBEST Race Electric Bike (partially assembled)
• 1 x akumuliatoriaus įkroviklis
• 1 x montavimo įrankių rinkinys
• 1 x Vartotojo vadovas
• Baterija (iš anksto įdiegta arba atskira)

4. Surinkimo instrukcijos

The ACTBEST Race Electric Bike comes partially assembled. Follow these steps carefully for complete assembly. For a visual guide, please refer to the assembly video below.

4.1. Vairo mazgas

1. Use the provided tools to loosen the screws on the stem.
2. Turn the stem to the correct riding position and securely tighten the screws.
3. Remove the front cover of the stem.
4. Carefully place the handlebar into position, ensuring all cables are free and not pinched.
5. Reattach the front cover and tighten the screws evenly to secure the handlebar.

4.2. Priekinio rato montavimas

1. Remove the protective screw and plastic cap from the front fork.
2. Carefully lift the front of the bike and align the front wheel with the fork dropouts, ensuring the brake rotor slides into the brake caliper.
3. Insert the quick-release skewer through the wheel hub.
4. Tighten the quick release nut and close the lever firmly.

4.3. Headlights and Taillights Installation

1. Attach the headlight to the designated mounting point on the front fork using the provided bracket and tools.
2. Attach the taillight to the seat post or rear rack (if applicable) using its mounting mechanism.

4.4. Seat Post and Saddle Installation

1. Įkiškite balnelio laikiklį su pritvirtintu balneliu į rėmo balnelio vamzdį.
2. Adjust the seat height to a comfortable and safe riding position.
3. Secure the seat post by closing the quick-release lever firmly. Ensure the minimum insertion mark on the seat post is not visible.

4.5. Pedalų montavimas

Note: Pedals are marked 'L' for left and 'R' for right. The right pedal tightens clockwise, and the left pedal tightens counter-clockwise.

1. Identify the 'R' pedal and thread it into the right crank arm (chain side) clockwise. Tighten with a wrench.
2. Identify the 'L' pedal and thread it into the left crank arm counter-clockwise. Tighten with a wrench.

4.6. Reflektoriaus montavimas

1. Attach the front reflector to the front of the bike, typically on the handlebars or front fork.
2. Pritvirtinkite galinį atšvaitą prie balnelio stovo arba galinio bagažinės.
3. Attach wheel reflectors to the spokes of both wheels.

4.7. Baterijos įdėjimas ir aktyvinimas

1. If the battery is separate, insert it into the frame's battery compartment.
2. Use the key to lock the battery securely in place.
3. Press the power button on the battery to activate it.

Vaizdo aprašymas: A fully assembled ACTBEST Race Electric Bike, white in color, showcasing its mountain bike design with front suspension, disc brakes, and integrated battery.

5. Naudojimo instrukcijos

5.1. Powering On/Off and Display

1. Ensure the battery is locked and powered on.
2. Press and hold the power button on the handlebar display to turn on the e-bike system.
3. The display will show speed, battery level, assist level, and other ride data.
4. To power off, press and hold the power button on the display again.

5.2. Važiavimo režimai

Your ACTBEST Race Electric Bike offers multiple riding modes for a customizable experience:

• Pedalų pagalbos režimas (PAS): Provides electric assistance as you pedal. Adjust the assist level (1-5) using the '+' and '-' buttons on the display. Higher levels provide more assistance.
• Throttle-Only Mode: Engages the motor without pedaling. Use the thumb throttle to control speed.
• Rankinis režimas: Važiuokite dviračiu kaip įprastu dviračiu be jokios elektros pagalbos.
• Ėjimo režimas: Provides low-speed assistance (typically up to 6 km/h) to help push the bike while walking. Activate via the display.

Vaizdo aprašymas: An illustrative image depicting the three primary riding modes: Pedal Assist, Manual, and Throttle-only, with a cyclist riding an e-bike on varied terrain.

5.3. Pavarų perjungimas

The bike is equipped with a Shimano 21-speed gear system. Use the shifters on the handlebars to change gears according to terrain and desired effort. Shift smoothly to avoid strain on the drivetrain.

5.4. Stabdžių sistema

The ACTBEST Race features dual disc brakes for reliable stopping power. Apply both front and rear brakes simultaneously for effective and controlled deceleration. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.

Vaizdo aprašymas: Išsamią view of the 27.5-inch wider tire and disc brake system, emphasizing its design for stability, traction, comfort, and shock absorption.

6. Priežiūra

Reguliarus techninis aptarnavimas yra labai svarbus jūsų elektrinio dviračio veikimui ir saugumui.

• Akumuliatoriaus priežiūra: Reguliariai įkraukite akumuliatorių, net kai jo nenaudojate, kad palaikytumėte jo būklę. Laikykite vėsioje, sausoje vietoje. Venkite visiškai iškrauti akumuliatorių.
• Padangų slėgis: Check tire pressure before each ride. Maintain pressure within the range indicated on the tire sidewall.
• Stabdžių patikra: Regularly check brake pads for wear and ensure brake levers are responsive. Adjust or replace as needed.
• Grandinės tepimas: Kad pavarų perjungimas būtų sklandus ir nesusidėvėtų, grandinė turi būti švari ir sutepta.
• Tvirtinimo detalės: Periodiškai patikrinkite visų varžtų, veržlių ir greito atjungimo mechanizmų tvirtumą.
• Valymas: Išvalykite savo elektrinį dviratį naudodami reklamąamp Neplaukite aukšto slėgio srove tiesiai ant elektrinių komponentų.

7. Problemų sprendimas

This section addresses common issues you might encounter with your ACTBEST Race Electric Bike.

If you encounter issues not listed here or cannot resolve a problem, please contact ACTBEST customer support.

8. Specifikacijos

Key technical specifications for the ACTBEST Race Electric Bike:

Vaizdo aprašymas: Papildomas profesionalasfile of the ACTBEST Race Electric Bike with key dimensions labeled, including overall length, height, seat height, handlebar width, suggested rider height range, and maximum load capacity.

9. Garantija ir palaikymas

The ACTBEST Race Electric Bike comes with a limited warranty. For specific warranty details, registration, or to obtain technical support, please refer to the warranty card included with your purchase or visit the official ACTBEST website. For any inquiries, contact ACTBEST customer service.