TaoHFE CT-VB003PK

TaoHFE Pink Kids Vanity Table and Chair Set Instruction Manual

Model: CT-VB003PK

1. Įvadas

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your TaoHFE Pink Kids Vanity Table and Chair Set, Model CT-VB003PK. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Saugos informacija

  • Surinkimo metu laikykite visas smulkias dalis ir pakavimo medžiagas vaikams nepasiekiamoje vietoje, kad išvengtumėte užspringimo pavojaus.
  • Prieš naudodami įsitikinkite, kad visi varžtai ir tvirtinimo detalės yra tvirtai priveržti. Periodiškai patikrinkite ir prireikus priveržkite.
  • Do not allow children to climb on the vanity table or chair.
  • Place the vanity set on a flat, stable surface to prevent tipping.
  • The LED mirror requires batteries (not included). Ensure correct battery polarity and dispose of used batteries responsibly.
  • Stenkitės, kad gaminys nepatektų į per didelę drėgmę ar tiesioginius saulės spindulius.

3. Pakuotės turinys

Prieš pradėdami surinkimą, patikrinkite, ar yra visi toliau išvardyti komponentai. Jei kokių nors dalių trūksta arba jos pažeistos, susisiekite su klientų aptarnavimo tarnyba.

  • Vanity Table Top with Mirror
  • Stalo kojos (4)
  • Drawer with Crystal Handle
  • Side Cabinet with Door
  • Kėdės atlošas
  • Kėdės sėdynė
  • Kėdžių kojos (4)
  • Surinkimo detalės (varžtai, kaiščiai ir kt.)
  • Instrukcijų vadovas
TaoHFE Pink Kids Vanity Table and Chair Set

3.1 pav. Baigtaview of the TaoHFE Pink Kids Vanity Table and Chair Set.

4. Sąranka ir surinkimas

Assembly typically requires a Phillips head screwdriver (not included). Follow the steps carefully.

4.1. Assemble the Vanity Table

  1. Attach the four table legs to the main table body using the provided screws. Ensure they are securely fastened.
  2. Slide the drawer into its designated slot. Attach the crystal handle to the drawer front.
  3. Attach the side cabinet door to the cabinet frame using the provided hinges.
  4. Carefully place the vanity top with the mirror onto the assembled base, aligning it with the pre-drilled holes. Secure it with screws.
Close-up of LED lighting, crystal handle, and display glass

Figure 4.1: Detail of the LED mirror, crystal handle, and display glass.

4.2. Assemble the Chair

  1. Attach the four chair legs to the chair seat using the provided screws.
  2. Secure the chair backrest to the chair seat and legs.

4.3. Install LED Mirror Batteries

  1. Locate the battery compartment behind the mirror.
  2. Insert the required batteries (type and quantity specified on the compartment cover) ensuring correct polarity.
  3. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.
View of the LED light wiring and battery compartment behind the mirror.

4.2 pav.: galinis view showing LED light wiring and battery compartment.

5. Naudojimo instrukcijos

5.1. Using the LED Mirror Light

To activate the LED light, press the power button located on the vanity surface near the mirror. Press again to turn off the light. The light provides natural, warm illumination.

Close-up of the LED light power button located on the vanity surface.

Figure 5.1: Location of the LED light power button.

5.2. Saugyklos naudojimas

The vanity table includes a main drawer with six partitioned compartments for organizing small items such as jewelry, hair accessories, or small toys. A side cabinet with a door offers additional enclosed storage space.

Open drawer revealing six partitioned storage compartments for accessories.

Figure 5.2: Open drawer showing partitioned storage.

Vanity set showing the side cabinet with a door for additional storage.

Figure 5.3: Vanity with side cabinet for storage.

6. Priežiūra

6.1. Valymas

  • Paviršius nuvalykite minkšta, damp skudurėliu. Venkite abrazyvinių valiklių ar stiprių cheminių medžiagų.
  • For the mirror, use a glass cleaner and a lint-free cloth.
  • Ensure the vanity is dry after cleaning to prevent water damage.

6.2. Bendroji priežiūra

  • Periodiškai patikrinkite visus varžtus ir jungtis, kad įsitikintumėte, jog jie yra tvirtai priveržti.
  • Venkite dėti karštus daiktus tiesiai ant praustuvo paviršiaus.
  • Keep the vanity away from direct heat sources or prolonged exposure to sunlight to prevent material degradation.

7. Problemų sprendimas

  • LED lemputė neveikia:
    Check if batteries are correctly installed and not depleted. Replace batteries if necessary. Ensure the power button is pressed firmly.
  • Stalčių klijavimas:
    Ensure the drawer is properly aligned on its runners. Check for any obstructions within the drawer or its compartment.
  • Vanity or Chair Wobbles:
    Patikrinkite, ar visi surinkimo varžtai yra tvirtai priveržti. Įsitikinkite, kad gaminys pastatytas ant lygaus paviršiaus.

8. Specifikacijos

FunkcijaDetalė
Prekės ženklasTaoHFE
Modelio numerisCT-VB003PK
SpalvaRožinė
MedžiagaInžinierinė mediena
Gaminio matmenys16.6 x 31.5 x 40.5 colių (tualetinis staliukas)
Prekės svoris40 svaro
Reikalingas surinkimasTaip
Veidrodžio tipasLED apšviestas veidrodis
SandėliavimasDrawer with 6 compartments, Side Cabinet
Detailed dimensions of the vanity table and chair.

8.1 pav.: Gaminio matmenų diagrama.

9. Informacija apie garantiją

For specific warranty details regarding your TaoHFE Pink Kids Vanity Table and Chair Set, please refer to the warranty card included with your purchase or contact TaoHFE customer support directly. Warranty terms and conditions may vary.

10. Pagalba klientams

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TaoHFE customer support. Refer to the contact information provided on the product packaging or the official TaoHFE websvetainę.

Susiję dokumentai - CT-VB003PK

Preview Vaikų išmaniojo laikrodžio naudotojo vadovas
Išsamus vaikams skirto išmaniojo laikrodžio naudotojo vadovas, kuriame aptariamas saugumas, veikimas, funkcijos ir trikčių šalinimas.
Preview „Odot Automation C“ serijos nuotolinio įvesties / išvesties vartotojo vadovas
Šiame naudotojo vadove pateikiama išsami informacija apie „Odot Automation C“ serijos nuotolinio valdymo IO sistemą, apimanti modulio funkcijas, įrengimą, laidus, techninius parametrus ir įvairių tinklo adapterių bei išplėstinių IO modulių konfigūravimą.
Preview CAEN ELS PS1215 Low-Noise Power Supply User Manual
User manual for the CAEN ELS PS1215, a single-output, dual-voltage, low-noise AC/DC power supply designed for high-efficiency operation and DCCT measurement systems. Includes technical specifications, safety guidelines, I/O details, and ordering information.
Preview CITIZEN Windows Driver Installation Guide for Ver3.6xx
This comprehensive guide provides step-by-step instructions for installing CITIZEN printer drivers (Ver3.6xx) on Windows operating systems. It covers essential preparation, the installation process, port selection for various interfaces, and uninstallation.
Preview CITIZEN OPOS Driver 1.14: Application Development Guide
Explore the CITIZEN OPOS Driver 1.14 Application Development Guide. This technical manual provides developers with essential information on integrating CITIZEN POS printers, cash drawers, line displays, and barcode scanners with Windows applications using the OPOS standard. It covers supported models, operating environments, registry settings, and development precautions.
Preview CITIZEN OPOS DRIVER 1.14 セットアップガイド:インストールと設定方法
CITIZEN OPOS DRIVER 1.14 セットアップガイドは、POSシステム用ドライバーのインストール、設定、および対応ハードウェアに関する詳細情報を提供します。