1. Įvadas
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TOMZN TOQ7e WiFi Smart Automatic Transfer Switch (ATS). Please read this manual thoroughly before installation and keep it for future reference.
The TOMZN TOQ7e is designed to automatically switch between two power sources, typically city power (Source A) and a generator or secondary power source (Source B), ensuring a continuous power supply to your electrical load. It features WiFi connectivity for smart control and monitoring via the EWelink application.
2. Saugos informacija
Improper installation or operation can lead to serious injury or damage to the device. Always adhere to the following safety guidelines:
- Profesionalus montavimas rekomenduojamas: Montavimą turėtų atlikti tik kvalifikuotas elektrikas, laikydamasis visų vietinių ir nacionalinių elektros kodeksų.
- Atjunkite maitinimą: Always ensure that all power sources are disconnected before performing any installation, wiring, or maintenance.
- ttage ir dabartiniai įvertinimai: Verify that the device's voltage ir srovės vardinės vertės atitinka jūsų elektros sistemos reikalavimus.
- Tinkamas įžeminimas: Įsitikinkite, kad prietaisas yra tinkamai įžemintas, kad išvengtumėte elektros smūgio.
- Aplinkos sąlygos: Nelaikykite įrenginio per didelėje drėgmėje, dulkėse ar ekstremalioje temperatūroje, viršijančioje nurodytą veikimo diapazoną.
- Saugūs ryšiai: Ensure all wire connections are tight and secure to prevent overheating and arcing.
3. Produktas baigtasview
The TOMZN TOQ7e ATS is a compact and intelligent device designed for reliable power transfer. It integrates automatic switching capabilities with smart home features.
1 pav.: priekis view of the TOMZN TOQ7e ATS, showing the manual/auto selector, indicator lights, and terminal connections.
Figure 2: Multiple TOMZN TOQ7e ATS units, illustrating various pole configurations and current ratings.
Pagrindiniai komponentai:
- Power Source A (City Power) Terminals: Connections for the primary power supply.
- Power Source B (Generator) Terminals: Connections for the secondary power supply.
- Apkrovos terminalai: Output connections to the electrical load.
- Manual/Auto Selector Switch: Allows selection between manual operation and automatic transfer mode.
- Indikacinės lemputės: Display the status of Source A, Source B, and the current power supply.
- WiFi modulis: Enables smart control and monitoring via the EWelink app.
4. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelis | TOQ7e |
| Nominali srovė | 63A, 100A, 125A (variant dependent) |
| Įvertintas ttage | 220V / 380V kintamoji srovė |
| lenkai | 2P, 3P, 4P (variant dependent) |
| Valdymo tipas | Automatic, Manual, WiFi (EWelink) |
| Apsaugos ypatybės | Short Circuit, Overload |
| Būsto medžiaga | Insulating, Flame-retardant, UV-resistant |
| Terminalai | Sraigtinio tipo |
| Sertifikavimas | CE |
| Veikimo dažnis | 50/60 Hz |
| Matmenys (apytiksliai) | Refer to product packaging or specific model datasheet for precise measurements. |
5. Montavimas
Įspėjimas: Ensure all power is disconnected before proceeding with installation. Installation must be performed by a qualified electrician.
5.1 Montavimas
The TOMZN TOQ7e ATS is designed for DIN rail mounting.
- Select a suitable location within your electrical panel or enclosure that provides adequate ventilation and protection from environmental factors.
- Attach the ATS securely to a standard DIN rail by engaging the mounting clip at the bottom of the device.
3 pav. Apačia view of the TOMZN TOQ7e ATS, showing the DIN rail mounting clip for secure installation.
5.2 Laidai
Follow the wiring diagram provided with your specific product variant or consult a qualified electrician. The general wiring principle involves connecting Source A (City Power), Source B (Generator), and the Load to their respective terminals.
- Source A (City Power): Connect the main utility power lines to the 'Source A' input terminals.
- Source B (Generator/Secondary Power): Connect the generator or secondary power lines to the 'Source B' input terminals.
- Įkelti: Connect the electrical circuits or appliances you wish to power to the 'Load' output terminals.
- Ensure correct phase and neutral connections.
- Tighten all screw terminals firmly to prevent loose connections and potential hazards.
6. Naudojimo instrukcijos
6.1 Rankinis valdymas
The ATS can be manually switched between power sources using the selector switch on the front panel.
- Ensure the selector switch is in the 'Manual' position.
- Rotate the switch to select either 'Source A' or 'Source B' to supply power to the load.
- Observe the indicator lights to confirm the active power source.
6.2 Automatinis veikimas
For automatic power transfer, set the selector switch to the 'Auto' position.
- When 'Source A' (City Power) is available, the ATS will automatically connect the load to Source A.
- If 'Source A' fails, the ATS will detect the outage and, after a pre-set delay, automatically switch the load to 'Source B' (Generator), provided Source B is available and stable.
- When 'Source A' is restored, the ATS will automatically switch the load back to Source A after a pre-set delay.
- Indicator lights will show the status of each source and which source is currently supplying power.
6.3 WiFi Connectivity and EWelink App
The TOMZN TOQ7e integrates with the EWelink app for remote monitoring and control.
- Download EWelink App: Download the EWelink app from your smartphone's app store (iOS or Android).
- Registruotis / Prisijungti: Create an account or log in to your existing EWelink account.
- Pridėti įrenginį: Follow the in-app instructions to add a new device. This typically involves putting the ATS into pairing mode (refer to the device's specific pairing instructions, usually by pressing and holding a button) and connecting to your home WiFi network.
- Remote Control & Monitoring: Once connected, you can monitor the status of both power sources, view current power usage (if supported by the specific model), and remotely switch between manual and auto modes, or even trigger a manual transfer.
- Laikmačio funkcijos: Utilize the app's timer features to schedule power transfers or monitor events.
7. Priežiūra
Regular maintenance ensures the longevity and reliable operation of your ATS.
- Periodinis patikrinimas: Kasmet apžiūrėkite įrenginį, ar nėra kokių nors fizinių pažeidimų, atsilaisvinusių jungčių ar spalvos pakitimų.
- Švara: Laikykite įrenginį be dulkių ir šiukšlių. Valymui naudokite sausą, minkštą šluostę. Nenaudokite skystų valiklių.
- Gnybtų sandarumas: Periodically check and re-tighten all screw terminals to ensure secure electrical connections.
- Funkcionalumo testas: Periodiškai patikrinkite automatinio perdavimo funkciją imituodami elektros energijos tiekimo nutraukimą.tage (e.g., by temporarily disconnecting Source A, if safe to do so and with proper precautions).
8. Problemų sprendimas
If you encounter issues with your TOMZN TOQ7e ATS, refer to the following troubleshooting guide:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Device not switching automatically | Selector switch in 'Manual' position. One or both power sources unavailable/unstable. | Set selector to 'Auto'. Check power supply to Source A and Source B. Ensure generator is running and stable. |
| No power output to load | No active power source. Overload or short circuit tripped internal protection. Loose wiring. | Verify both Source A and Source B are active. Check for tripped circuit breakers upstream. Inspect and tighten all wiring connections. |
| „Wi-Fi“ ryšio problemos | Incorrect WiFi password. Device too far from router. Router issues. | Ensure correct WiFi password. Move device closer to router or use a WiFi extender. Restart router. Re-attempt pairing process. |
| Neveikia indikacinės lemputės | No power to the device. Faulty unit. | Check power supply. If power is present and lights are still off, contact support. |
Jei problema išlieka ir išbandžius šiuos sprendimus, kreipkitės į klientų aptarnavimo tarnybą arba kvalifikuotą elektriką.
9. Garantija ir palaikymas
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your seller directly. Ensure you have your product model number and purchase date available when contacting support.
