„Aideepen NerdMiner V2 ESP32“ kūrimo plokštės naudotojo vadovas

1. Įvadas

The Aideepen NerdMiner V2 ESP32 Development Board is a compact, open-source device designed for Bitcoin mining. It features an ESP32-D0WD-V3 WiFi MCU and a 2.8-inch touch screen for displaying operational status and related information. This manual provides instructions for setup, operation, maintenance, and troubleshooting.

Figure 1: NerdMiner V2 ESP32 Development Board and Accessories

2. Gaminio komponentai

Į paketą įeina šie elementai:

• NerdMiner V2 ESP32 Development Board with 2.8-inch Smart Display
• Acrylic Case (may require assembly)
• USB-C kabelis
• Rašiklis
• Jumperių laidai

2 pav. Įtraukti komponentai

3. Sąrankos instrukcijos

3.1. Case Assembly

If your device arrived unassembled, follow these steps to install the acrylic case:

1. Carefully place the ESP32 board into the bottom acrylic plate.
2. Align the top acrylic plate and secure it with the provided screws.
3. Ensure all ports and buttons are accessible.

3.2. Pradinė konfigūracija

The device operates independently via WiFi. Follow these steps for initial setup:

1. Maitinimas: Connect the device to a power source using the USB-C cable. Upon powering on, the device attempts to connect to a previously configured WiFi network.
2. Access Point Setup: If WiFi connection fails after 15 seconds, the device automatically enters configuration mode. Ieškokite the free access point named nmap-2.4g (no password required) on your mobile device or computer.
3. Konfigūravimo sąsaja:
   • Mobilieji įrenginiai: Būsite automatiškai nukreipti į konfigūracijos puslapį.
   • PC/Desktop: Eikite į http://192.168.4.1 tavo web naršyklė.
4. Įveskite nustatymus: On the configuration page, you will need to input your WiFi password, primary and fallback pool URLs, and your Bitcoin address. You can also adjust settings like time zone, UI refresh interval, screen sleep timeout, and initial screen brightness.

Figure 3: Configuration Page Example

For detailed firmware activation and upgrade instructions, refer to the official GitHub repository: https://github.com/NMminer1024/NMMiner.

4. Prietaiso valdymas

Once configured, the NerdMiner V2 operates autonomously, displaying real-time mining statistics on its 2.8-inch touch screen.

4.1. Rodyti informaciją

The display provides a comprehensive overview of the device's status and mining performance:

Figure 4: Display Elements Explained

• Block Found: Indicates if a Bitcoin block has been found.
• Programinės įrangos versija: Dabartinė programinės įrangos versija.
• Vietinis IP: Device's IP address on the local network.
• Best Difficulty of Miners in LAN: The highest difficulty achieved by miners on the local network.
• Counter of Miners in LAN: Number of active miners on the local network.
• Maišos rodiklis: Current mining speed in KH/s.
• Total Hash Rate of Miners in LAN: Aggregate mining speed of all local miners.
• WiFi RSSI: Signal strength of the WiFi connection.
• BTC Price: Real-time Bitcoin price.
• Job Receive Counter: Number of mining jobs received.
• Network Difficulty: Current difficulty of the Bitcoin network.
• Last Share Diff/Best Diff: Difficulty of the last submitted share and the best difficulty achieved.
• Share (rejective) / Share (accept): Ratio of rejected to accepted shares.

4.2. Spektaklis

The device is designed for optimal performance with an open-source, deeply optimized algorithm firmware, achieving a maximum computing power of 980KH/s to 1000KH/s.

Figure 5: Hashrate Performance

5. Priežiūra

To ensure the longevity and optimal performance of your NerdMiner V2, consider the following maintenance tips:

• Valymas: Gently wipe the screen and case with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Aplinka: Operate the device in a cool, dry environment away from direct sunlight and excessive dust.
• Firmware atnaujinimai: Regularly check the official GitHub repository for firmware updates to ensure the device runs with the latest optimizations and features.

6. Problemų sprendimas

If you encounter issues with your NerdMiner V2, refer to the following common problems and solutions:

• Device Restarts Multiple Times Upon Powering On:
  This may indicate an insufficient power supply. Try using an alternative power adapter, such as a 5V 2A model. Ensure the USB-C cable is securely connected.
• Unable to Connect to WiFi or Configuration Page:
  Ensure the device is in configuration mode (if not, power cycle it). Double-check that you are connecting to the correct access point (nmap-2.4g) and that your device's WiFi is enabled. If using a PC, verify the IP address 192.168.4.1 įvesta teisingai.
• Device Keeps Cycling Through Settings / Not Saving Configuration:
  This can also be related to power supply issues. Ensure you are using a stable 5V 2A power source. Re-enter your settings carefully and ensure you click 'Save' on the configuration page.
• Firmware Activation or Upgrade Issues:
  Refer to the official GitHub repository (https://github.com/NMminer1024/NMMiner) for detailed instructions and tools. If issues persist, contact customer support for assistance.
• Missing Acrylic Case Components:
  While the product description states the board and shell are included, if you find components missing, contact Aideepen customer service for resolution.

7. Specifikacijos

Key technical specifications of the Aideepen NerdMiner V2 ESP32 Development Board:

Figure 6: Board Interfaces

7 pav.: Įrenginio matmenys

8. Garantija ir palaikymas

8.1. Informacija apie garantiją

Each product purchased from Aideepen includes 24 months of service. In the event of any quality issues with your item, you are eligible for a new replacement.

8.2. Pagalba klientams

For any questions, technical assistance, or after-sales guidance, please contact Aideepen customer service. We are committed to providing swift resolution and comprehensive support.