1. Įvadas
This manual provides essential information for the safe and efficient use of your HumsiENK 48V 150AH Automotive Replacement Battery. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of your battery.
The HumsiENK 48V 150AH battery is designed to deliver reliable, consistent power for various automotive and industrial applications. It features a robust 48-volt system with a 150 amp-hour capacity, engineered for dependable starting power and deep-cycle capabilities.
2. Saugos instrukcijos
WARNING: Failure to follow these safety instructions may result in serious injury, property damage, or battery damage.
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling batteries.
- Do not short-circuit the battery terminals. This can cause sparks, fire, and severe damage to the battery and connected equipment.
- Laikykite bateriją atokiau nuo atviros liepsnos, kibirkščių ir šilumos šaltinių.
- Ensure proper ventilation during charging and operation to prevent accumulation of gases.
- Do not disassemble, puncture, or modify the battery. There are no user-serviceable parts inside.
- Venkite akumuliatoriaus numetimo ar stiprių smūgių.
- Laikyti vaikams nepasiekiamoje vietoje.
- Optimaliam našumui ir saugumui rekomenduojamas profesionalus montavimas.
- In case of contact with battery acid (if applicable for lead-acid, though this is LiFePO4, general caution applies), flush immediately with water and seek medical attention.
3. Pakuotės turinys
Išpakuodami patikrinkite, ar visi daiktai yra pakuotėje ir nepažeisti.
- HumsiENK 48V 150AH Automotive Replacement Battery (Quantity: 2)
- Vartotojo vadovas (šis dokumentas)
Image 1: HumsiENK 48V 150AH Automotive Replacement Battery. This image shows the robust construction and terminal connections of the battery.
4. Produktas baigtasview
The HumsiENK 48V 150AH battery is a high-performance power solution for demanding automotive and industrial applications. Key features include:
- Didelė talpa: 48V 150AH for extended power delivery.
- Tvirta konstrukcija: Engineered to withstand demanding environments.
- Visuotinis suderinamumas: Suitable for various vehicle types and models.
- Deep-Cycle Capabilities: Designed for both starting power and sustained discharge.
5. Sąranka ir diegimas
Note: Professional installation is highly recommended to ensure correct wiring and safe operation.
- Paruošimas:
- Ensure the vehicle's ignition is off and all electrical loads are disconnected.
- Dėvėkite apsauginius akinius ir pirštines.
- Locate the existing battery compartment.
- Removing Old Battery (if applicable):
- Pirmiausia atjunkite neigiamą (-) gnybtą, tada teigiamą (+) gnybtą.
- Atsargiai išimkite seną bateriją, atkreipdami dėmesį į jos orientaciją.
- Installing New Battery:
- Place the HumsiENK 48V 150AH battery securely in the battery compartment.
- Connect the positive (+) terminal first, then the negative (-) terminal. Ensure connections are tight and secure (M8 terminals).
- Verify that there are no loose connections or exposed wires.
- Pradinis patikrinimas:
- After installation, perform a system check to ensure all components are functioning correctly.
6. Naudojimo instrukcijos
The HumsiENK 48V 150AH battery is designed for straightforward operation once correctly installed. It provides power to your vehicle's electrical system and is recharged by the vehicle's charging system.
- Ensure the battery is fully charged before initial heavy use.
- Monitoriaus akumuliatoriaus talpatage if your vehicle has a compatible display.
- Venkite visiškai iškrauti akumuliatorių, nes tai gali sutrumpinti jo tarnavimo laiką.
7. Priežiūra
Proper maintenance will extend the life and performance of your HumsiENK battery.
- Terminalo apžiūra: Periodically check battery terminals for corrosion and ensure they are clean and tight. Clean with a wire brush if necessary.
- Baterijos valymas: Keep the battery top clean and dry. A damp cloth can be used to wipe away dirt and grime.
- Įkrovimas: If the vehicle is stored for extended periods, consider using a compatible 48V battery charger to maintain a full charge. Consult your vehicle's manual for specific charging recommendations.
- Saugykla: Store the battery in a cool, dry place if removed from the vehicle for an extended period. Ensure it is charged to at least 50% before storage.
8. Problemų sprendimas
Jei kyla problemų dėl akumuliatoriaus, žr. toliau pateiktas dažniausiai pasitaikančias problemas ir sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Vehicle not starting / Low power | Low battery charge, loose terminal connections, faulty charging system. | Check terminal connections. Charge the battery with a compatible charger. Inspect vehicle's charging system (alternator, regulator). |
| Baterija neišlaiko įkrovos | Deep discharge, internal fault, parasitic drain from vehicle. | Ensure battery is not repeatedly deep-discharged. Consult a professional to check for parasitic drains or internal battery issues. |
| Korozija ant gnybtų | Environmental factors, loose connections. | Clean terminals with a wire brush and battery terminal cleaner. Ensure connections are tight. |
If troubleshooting steps do not resolve the issue, contact HumsiENK customer support or a qualified automotive technician.
9. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | HumsiENK |
| Modelis | 48V150AH |
| ttage | 48 V (nominali) |
| Talpa | 150 AH |
| Prekės svoris | 180 svaro |
| Gaminio matmenys (D x P x A) | 7.6" x 11.6" x 7.7" |
| Ląstelių skaičius | 24 |
| Atsparumas | 0.05 omai |
| Terminalo tipas | M8 |
| Tinkamo automobilio tipas | Universalus tinka |
| OEM dalių numeriai | 48v150ah-dual, Bt48150-2p |
10. Informacija apie garantiją
HumsiENK products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official HumsiENK websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
11. Pagalba klientams
If you have any questions, require technical assistance, or need to report an issue, please contact HumsiENK customer support through the following channels:
- Prisijungę: Visit the official HumsiENK webpagalbos išteklių ir kontaktinių formų svetainė.
- El. paštas: Refer to your product packaging or warranty information for a direct support email address.
- „Amazon“ parduotuvė: Taip pat galite apsilankyti HumsiENK Store on Amazon for additional information and support options.
