Varstrom 52V 20Ah Ebike Battery User Manual

1. Produktas baigtasview

The Varstrom 52V 20Ah Lithium Ion Ebike Battery is designed for electric bike conversion kits, compatible with mid-motors and hub motors ranging from 50W to 1500W. This battery provides reliable power and features an advanced Battery Management System (BMS) for safety and efficiency.

Figure 1: Varstrom 52V 20Ah Ebike Battery showing key dimensions (368mm x 95mm x 125mm) and specifications such as 1040Wh energy, 30A BMS, 5pin header discharge port, and 1000 cycle life.

Pagrindinės funkcijos:

• ttage & Capacity: 52V 20Ah (1040Wh)
• Suderinamumas su varikliu: 50W to 1500W electric bike motors (including 500W, 750W, 1000W, 1200W, 1500W).
• Didžiausia nuolatinio iškrovimo srovė: 30A
• Matmenys: 368 mm x 95 mm x 125 mm
• Discharge Connector: XT60 Female with 5-pin battery base
• Sauga: Equipped with an advanced Battery Management System (BMS) for overcurrent, overvoltage, overload, overcharge, overdischarge, temperature, and short circuit protection, along with cell voltage balansavimas.
• USB prievadas: 5V 1A USB output for charging mobile devices.

Figure 2: The Yingwu battery highlighting its comprehensive protection features including overcurrent, overvoltage, overload, overcharge, overdischarge, temperature, short circuit protection, and cell voltage balansavimas.

2. Sąranka ir diegimas

2.1 Pakuotės turinys

Before proceeding with installation, verify that all components are present in the package:

• 1x 52V 20Ah Down Tube Battery
• 1x pakrovėjas
• 1x Battery Fix Plate
• 2x raktai
• 4x Varžtai
• 1x vartotojo vadovas

Figure 3: Visual representation of the package contents including the battery, charger, battery fix plate, keys, screws, and user manual. Also shows a diagram of the installation steps on an ebike frame.

2.2 Battery Installation on Ebike

Follow these steps to securely install the battery onto your electric bike frame:

1. Paruoškite montavimo vietą: Ensure the mounting area on your bike frame is clean and free from obstructions.
2. Attach the Battery Fix Plate: Use the provided screws to securely attach the battery fix plate to the designated mounting points on your bike frame. Ensure it is firmly tightened.
3. Slide the Battery onto the Plate: Align the battery with the fix plate and slide it down until it clicks into place.
4. Lock the Battery: Insert the key into the lock mechanism on the battery and turn it to secure the battery to the frame. Remove the key.
5. Prijunkite maitinimo laidus: Connect the battery's discharge cable to your ebike's motor controller. Ensure a secure connection.

3. Naudojimo instrukcijos

3.1 Powering On/Off and Battery Level Check

To power on the battery, press the power switch located on the battery casing. The battery power indicator lights will illuminate, showing the current charge level. To power off, press the switch again.

4 pav. Iš arti view of the battery's features, including the safe lock mechanism, DC2.1 charging port, 5-pin discharge port, and XT60 female battery connector. The power switch and battery level indicator lights are also visible.

3.2 Akumuliatoriaus įkrovimas

To charge the battery, connect the provided charger to the DC2.1 charging port on the battery. Plug the charger into a standard wall outlet. The indicator light on the charger will typically show red during charging and turn green when fully charged. Ensure the charging current does not exceed 3A.

3.3 Using the USB Output

The battery features a 5V 1A USB output port, allowing you to charge mobile devices directly from the ebike battery. Simply connect your device's USB charging cable to the port.

4. Priežiūra ir priežiūra

Proper maintenance ensures the longevity and optimal performance of your Varstrom ebike battery.

• Reguliarus įkrovimas: Charge the battery regularly, even if not in frequent use, to maintain cell health. Avoid completely draining the battery.
• Saugykla: If storing the battery for an extended period, charge it to approximately 50-60% capacity and store it in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 2-3 months.
• Valymas: Naudokite sausą arba šiek tiek damp cloth to clean the battery casing. Do not use harsh chemicals or immerse the battery in water.
• Temperatūra: Avoid operating or charging the battery in extreme hot or cold conditions. Optimal operating temperature is typically between 0°C and 45°C (32°F and 113°F).
• Patikra: Periodically inspect the battery and connectors for any signs of damage, corrosion, or wear.

5. Įprastų problemų šalinimas

This section addresses common issues you might encounter with your ebike battery.

6. Techninės specifikacijos

7. Saugos gairės

Kad išvengtumėte sužalojimų ar žalos, laikykitės šių saugos nurodymų:

• Neardykite, nepradurkite ir nemodifikuokite akumuliatoriaus.
• Use only the charger provided by Varstrom or a compatible charger with the correct voltage ir dabartinės specifikacijos.
• Keep the battery away from heat sources, open flames, and direct sunlight.
• Nemerkite baterijos į vandenį ir nelaikykite jos per didelėje drėgmėje.
• Store the battery out of reach of children and pets.
• If the battery shows signs of damage, swelling, or leakage, discontinue use immediately and contact customer support.
• Išmeskite bateriją pagal vietinius ličio jonų baterijų išmetimo reikalavimus.

8. Garantija ir klientų aptarnavimas

Varstrom products are designed for quality and reliability. For warranty information, please refer to the warranty card included in your package or visit the official Varstrom website. For technical assistance, troubleshooting, or any other inquiries, please contact Varstrom customer support through the contact details provided on our websvetainėje arba jūsų pirkimo platformoje.

Note: Keep your purchase receipt and product serial number for warranty claims.