BSEED W-SD Multi Function Power Meter
rakto funkcija
Produkto pristatymas
The multi – functional Wlfl guide rail meter adopts a rail – type design, which is small in size, compact instructure and simple in installation; it uses an LCD display screen to display current, voltage, electricity, power,frequency and other electrical parameters, is convenient for users to acquire data and easy to operate. It hasgood anti – electromagnetic interference capabilities, meets various needs of power management, facilitates therealizationof terminal – intelligent power metering, and facilitates the retrofitting of power meters in the lateltransformation of the lighting system. It is widely used in commercial squares, science and technology parksuniversities and other occasions where billing is required, It can also be jointly deployed with energyconsumption monitoring and energy management systems. its application scope includes property bilingmanagement, electricity metering, power demand – side management, energy management andenergy-saving analysis, Other low – voltage power systems, etc.
Techniniai parametrai
| Nominali ttage | AC 220V/110v |
| Veikimo ttage asortimentas | AC 80V-300V |
| Dažnis | 50/60Hz |
| Galios diapazonas | 0–99999 kWh |
| Laiko diapazonas | 0-999 dienas |
| Galios koeficientas | 0-1.0 PF |
| Temperatūros diapazonas | -40-150°C |
| Overvoltage nustatymo diapazonas | 130-300V |
| Undervoltage nustatymo diapazonas | 75-21ov |
| Overcurrent setting range | 1-63A |
| Overpower setting range | 1-15KW |
| Nominali izoliacija ttage | 400 V |
| Išvesties kontaktai | 1 NE |
| Mechaninis gyvenimas | 10,000 kartus |
| Apsaugos klasė | lp30 |
| Aukštis virš jūros lygio | ::,2000m |
| Drėgmė | 550%at40°C(non-condensing) |
Function Introduction, Default Settings
| Parinktys | Nustatymo diapazonas | Numatytieji parametrai |
| Overvoltage
apsauga |
230-300V | 270 V |
| Undervoltage
apsauga |
110-21ov | 170 V |
| Viršsrovė
apsauga |
0.1-63A | 40A |
| Apsauga nuo perkrovos | 1-15KW | 8. 8KW |
| Elektros energija
apsauga |
0–99999 kWh | 99999 kWh |
| Viršutinė temperatūra
apsauga |
0-150°( | 85°C |
| Number of closures | 1-30 kartus | 5 kartus |
| Closingtime | 1-600 sekundžių | 30 sekundžių |
| Electricityclearing | Įjungta/Išjungta | išjungti |
| Timing clearing | Įjungta/Išjungta | išjungti |
| Power-up operation | Close/open/hold | išlaikyti |
| Overvoltagedelay
apsauga |
1-600 sec/off | išjungti |
| Undervoltagedelay
apsauga |
1-600 sec/off | išjungti |
| Overcurrent delay
apsauga |
1-600 sec/off | išjungti |
| Overloaddelay
apsauga |
1-600 sec/off | išjungti |
| Viršutinė temperatūra
delayprotection |
1-600 sec/off | išjungti |
structural analysis
MATMENYS
Produkto dydis
Sujungimo schema
Set function operation
Press the set key for 5 seconds to enter the settings page, give an example of the “Overvoltage Protection” setting, click the
key cursor to move to the “Overvoltage Protection” position, press the set key to select, press the
key to adjust to the required value, press the set to save after the adjustment is completed, and press the key to select other settings. If you do not need to set it, press the
key to move the cursor to the exit position, and then press set to return to the home page. The other settings can be the same as the “Overvoltage Protection” setting method.
Set function operation
Atsisiųskite „Smart Life“ programą 
or Graffiti APP Smart Connection
WIFI connection or reset operation method: Long press the wifi key 5-10s wifi indicator light will flash, turn on the phone Bluetooth, then open the Smart Life APP, click “+” in the upper right corner, select “Add Device”, wait for the device to scan out the device, click on the device to select the wifi name, enter the password to wait for the device to be added successfully.
DAUGIAU INFORMACIJOS
Dokumentai / Ištekliai
 |
BSEED W-SD Multi Function Power Meter [pdfNaudojimo instrukcija wifi_1p_din_rail, W-SD Multi Function Power Meter, W-SD, Multi Function Power Meter, Function Power Meter, Power Meter, Meter |