CW Morse is a US manufacturer of high-quality Morse code keys, paddles, practice oscillators, keyers, cables, and accessories for amateur radio enthusiasts.
CW Morse LLC is a family-owned and operated manufacturer specializing in Morse code communication equipment. Made in the USA by FCC Licensed Amateur Radio Operators, their product lineup includes a wide variety of high-quality Morse code paddles, straight keys, practice oscillators, keyers, and accessories.
Their popular devices, such as the Mini-Yack Iambic Keyers and PCB Straight Keys, cater to both beginners learning Morse code and experienced ham radio enthusiasts looking for reliable, tactile equipment for everyday on-air CW (Continuous Wave) contacts.
Naujausi vadovai iš manuals+ šiam prekės ženklui kuruota.
Dažniausiai užduodami klausimai apie šio prekės ženklo vadovus, registraciją ir palaikymą.
To reset, power off the unit. Hold the command button down and then power on the unit. Push and release the reset button (located internally or on the rear panel, depending on the model), then release the command button. This restores factory defaults.
The Mini-Yack keyers typically require 2 AA batteries. Ensure the internal battery jumper is set to the ON position if the unit was shipped to you or has been in long-term storage.
Yes. Plug your straight key into the KEY jack using a 3.5mm mono or stereo plug. For a stereo plug, hold the key down during power-up or configure the ring and shield wires to detect straight key mode. The unit will send 'STK' upon confirmation.
You can change the speed by pressing and holding the COMMAND button while operating the DIT and DAH paddles. DIT reduces speed, while DAH increases it. The keyer will play an alternating sequence of dit and dah while changing speed without keying the transmitter.