Ouster manufactures high-resolution digital lidar sensors and perception software for autonomous vehicles, robotics, and smart infrastructure.
Ouster is a leading innovator in high-resolution digital lidar sensors and perception software, empowering autonomy across the automotive, industrial, robotics, and smart infrastructure sectors. By leveraging a unique digital architecture based on custom silicon, Ouster delivers high-performance sensors—such as the OS0, OS1, and OS2 series—that offer superior reliability and affordability compared to legacy analog solutions.
These sensors are integral to applications ranging from 3D mapping and crowd analytics to last-mile delivery and autonomous driving.
Naujausi vadovai iš manuals+ šiam prekės ženklui kuruota.
Peržiūrėkite šio prekės ženklo vaizdo įrašus apie sąranką, diegimą ir trikčių šalinimą.
Dažniausiai užduodami klausimai apie šio prekės ženklo vadovus, registraciją ir palaikymą.
Use 99% isopropyl alcohol with a clean microfiber towel to wipe away debris, followed by warm, mild-soapy water. Rinse with clean water and dry with a microfiber towel. Do not use acetone.
No, Ouster sensors (e.g., OS0, OS1, OS2) are hermetically sealed units. Opening the housing or attempting repairs can expose the user to hazardous laser radiation and will void the warranty.
Ouster sensors typically operate at 12V and 24V nominal input voltage. Mažas tūristage warning triggers below 9.5V, and the sensor will shut down if the voltage nukrenta iki 9V.
Parsisiųsti CAD files for sensors like the OS0, OS1, and OS2 are available on the Ouster website under the product details or resources section.
The boot-up sequence takes approximately 60 seconds, after which the optics begin spinning, the laser activates, and the unit starts operating in its default mode.