EPH DC7-25 Adjustable Step Down Module
Specifikacijos
| Funkcija | Detalės |
|---|---|
| Prekės ženklas | EPH |
| Modelis | DC7-25 |
| Tipas | Adjustable Step-Down (Buck) Voltage Regulator Module |
| Įvesties tomastage | DC 7V – 25V |
| Išėjimas ttage | Adjustable: DC 1.25V – 20V (depending on load and input) |
| Išėjimo srovė | Typically up to 3A (check datasheet for exact max) |
| Konversijos efektyvumas | ~85–95% typical |
| Koregavimo metodas | Precision potentiometer (variable resistor) |
| ttage reglamentas | Stable output with minimal ripple |
| Apsaugos ypatybės | Short-circuit protection, thermal shutdown (model-dependent) |
| Darbinė temperatūra | -40°C to +85°C (typical) |
| Dydis / Matmenys | Compact PCB module (approx. 43 × 21 × 14 mm, confirm model) |
| Programos | Arduino projects, electronics prototyping, LED drivers, battery charging, DIY circuits |
| Svoris | Lightweight, PCB only (~15–20 g) |
| Saugumas | Ensure proper heat dissipation when drawing high current |
Greitos pradžios vadovas
- Connect the DC power input to the module using the DC5.5mm*2.1mm interface.
- Pasirinkite norimą išėjimo tūrįtage (3.3V, 5V, or adjustable) using the onboard settings.
- Įsitikinkite, kad įvesties ttage is between DC7V and DC25V.
- Power on the module and check the power indicator light for functionality.
Saugos informacija
Įspėjimai:
- Consult a doctor before use if you are unsure about handling electrical components.
- Ensure clear space for movement while working with the module to avoid accidents.
- Keep the module dry and away from moisture.
- Wipe the module with a damp cloth for cleaning and avoid using harsh chemicals.
Susisiekite
- Paslauga: Contact our store support for any issues.
Dokumentai / Ištekliai
 | DC7-25 Adjustable Step Down Module |
Nuorodos
- Vartotojo vadovasmanual.tools
Paskelbta: 23 m. gegužės 2026 d