GRID BROWS LED Brows Instruction Manual

GRID BROWS LED Brows

PRIEŠ PRADĖDAMI

Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).

Antakiai

Savybės

• CFRP enclosures
• 2x 9 RGB LEDs
• RaceDirector compatible

Carbon fiber mounting brackets 

Mounting the brows

To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). Šiame buvample we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.

Connecting the brows

As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box.

lenktynių direktorius

• Download and install the lastest version of RaceDirector from  www.sim-lab.eu/srd-setup
• For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
• Dabar apžvelgsime pačius pagrindus, kaip pradėti naudoti „RaceDirector“, kad kuo greičiau pasiektumėte kelią. Mes tikrai raginame jus perskaityti vadovą, kad galėtumėte išsamiau paaiškinti „RaceDirector“ teikiamas galimybes.
• Pirmiausia turime suaktyvinti produktą, tai daroma puslapyje „Nustatymai“ (1).
• Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.

Įrenginio puslapiai

These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.

LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.

FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.„RaceDirector“ stebi esamas programinės įrangos versijas. Kai aptinka skirtumą, pateikiamas pranešimas praneš, kad buvo aptikta naujesnė programinė įranga. Aptikus atnaujintą programinės įrangos versiją, vykdykite instrukcijas ir spustelėkite mygtuką „Atlikti atnaujinimą“ (1).
„RaceDirector“ rodys eigą ir pasirūpins atnaujinimu už jus. Jei matote iššokantį „Windows Explorer“ arba USB įrenginio langelį, nesijaudinkite, tai yra proceso dalis.

Senesniems įrenginiams vis tiek gali reikėti ankstesnės programinės įrangos atnaujinimo priemonės. Tokiu atveju „RaceDirector“ nurodys, ką daryti.

Simhub palaikymas

For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. Šviesos diodų funkcijų keitimas.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. Pateiktame numatytame LED pro turėtų būti pakankamai informacijosfiles, kad galėtumėte reguliuoti LED nustatymus pagal savo skonį. Norėdami pradėti kurti savo profesionaląfile, siūlome nukopijuoti esamą ir kur reikia pakeisti. Advanastagy. visada turite numatytosios profesionalios programos atsarginę kopijąfile grįžti prie.
Pastaba: dėl „Simhub Pro“ problemų / trikčių šalinimofiležr. „Simhub“ dokumentaciją arba „Simhub“ palaikymo tarnybą.

Medžiagų sąmata

Daugiau informacijos

Jei vis dar turite klausimų dėl šio gaminio surinkimo arba paties vadovo, kreipkitės į mūsų pagalbos skyrių. Juos galima pasiekti adresu:  support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord