LTECH KMS1 Switch Module
Produkto pristatymas
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
Techninės specifikacijos
| Modelis | KMS1 |
|---|---|
| Bevielis tipas | Reikalas per giją |
| Perjungti kanalą | 1 CH |
| Veikimo ttage | 100-240V~, 50/60Hz |
| Relės maks. apkrovos parametrai | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| Relės viršįtampio srovė | 70A@10ms |
| Darbinė temperatūra | -25°C ~ 50°C |
| Produkto dydis | L45 × P 45.5 × A 20.5 (mm) |
| Produkto svoris | 38g |
| Standartai | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
Produktų vaizdai
MATMENYS
- Vienetas: mm
- Matmenys: 45 x 45.5 x 20.5
Laidų schema
- Mechaninio jungiklio laidų schema
Includes connections for load, line (L), and neutral (N).
- Paspauskite jungiklio laidų schema
Includes connections for load, line (L), and neutral (N).
Naudokite NFC apšvietimo programėlę
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
Redaguoti parametrus
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
Suderinami modeliai
Nustatyti Pvzample
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
Pridėti priedus
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
Valdymo įrenginys
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
Išplėstinės funkcijos
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
Atkurti gamyklinius nustatymus
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
Įjungimo nustatymas iš naujo
Esant galiai outage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
Dėmesio
- Produkto montavimą ir paleidimą turi atlikti kvalifikuotas specialistas.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- Geras šilumos išsklaidymas prailgins gaminių tarnavimo laiką. Užtikrinkite gerą vėdinimą.
- Patikrinkite, ar darbinis ttage naudojamas atitinka gaminiams keliamus parametrų reikalavimus.
- Naudojamo laido skersmuo turi būti toks, kad būtų galima apkrauti jūsų prijungtus šviestuvus ir užtikrinti tvirtus laidus.
- Prieš įjungdami gaminius, įsitikinkite, kad visi laidai yra teisingi, jei prijungti neteisingai ir sugadinti šviestuvus.
- Jei atsiranda gedimas, nemėginkite patys taisyti gaminių. Jei turite klausimų, susisiekite su savo tiekėjais.
Garantijos sutartis
Garantijos terminai nuo pristatymo datos: 2 metai. Garantiniais laikotarpiais teikiamos nemokamos remonto ar keitimo paslaugos esant kokybės problemoms.
Garantijos išimtys
- Garantiniai terminai.
- Bet kokia dirbtinė žala, padaryta didelio tūriotage, perkrova arba netinkamos operacijos.
- Produktai, turintys didelę fizinę žalą.
- Žala, padaryta dėl stichinių nelaimių ir force majeure.
- Sugadintos garantinės etiketės ir brūkšniniai kodai.
- No contract signed by our company.
Dokumentai / Ištekliai
 |
LTECH KMS1 Switch Module [pdfNaudotojo vadovas KMS1 Switch Module, KMS1, Switch Module, Module |