yangchi Button Switch
Informacija apie produktą
Produkto pavadinimas: Perjungti
Partijos / serijos numeris: Mygtuko jungiklis
Manufacturer & Eu Representative Info
Gamintojas:
Įmonės pavadinimas: Guangzhou yangchi auto parts co. LTD
Adresas: CN-2 # 1003 min joke Chuang, mining key ji yuan, tai he zhen, baryon district, Guangzhou.
El. paštas: ouyan99@dingtalk.com
Telefonas: 86-13421389711
ES įgaliotasis atstovas:
Įmonės pavadinimas: CET PRODUCT SERVICE LTD
Adresas: Osterholzallee 144 , 71636 Ludwigsburg Germany
El. paštas: info.cetservice@gmail.com
Telefonas: Tel: +4971416432236
Atitikties informacija
eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurtas prie Maino, Vokietija contact@evatmaster.com
OST_EU_20220224000026
Mes tiesiog veikiame kaip ES atstovai tarptautiniams pardavėjams ir nesame produkto gamintojai / importuotojai / platintojai, taip pat nedalyvaujame produkto gamyboje / importe / pardavime. Todėl neatsakome už jokį su produktu susijusį garantinį aptarnavimą. Kilus bet kokioms produkto kokybės ar pažeidimų problemoms, atsakingas yra tik gamintojas / importuotojas / pardavėjas.
PASTABA: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
Sauga ir įspėjimai
Svarbi saugos informacija
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.\r\n·
Įspėjimas: Keep the device and its cord out of reach of children under 3 years old.\r\n· Keep away from children unless supervised by an adult.\r\n·
Do not use this product for purposes other than its intended use.\r\n· Inspect the product before each use; do not use if damaged.\r\n· Follow installation and operation guidelines to avoid injury.\r\n.
Naudojimo instrukcijos
How to Replace a Faulty Window Switch:
1 veiksmas: Disconnect the negative battery terminal before working on the switch to prevent short circuit. Next, unclip the handles using a screw driver. Lift the faulty switch out of its harness.
2 veiksmas: If you don’t want to take off the door casing or the door handle, simply slide a flat-head screwdriver under The switch bezel and pry it until it loosens to access the housing.
3 veiksmas: Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting a new switch into the harness holes.
4 veiksmas: Assemble the rockers into the new switch and snap the device into the bezel.
Dokumentai / Ištekliai
 |
yangchi Button Switch [pdfNaudojimo instrukcija Button Switch, Switch |